Commit 82c4c58d authored by Artem Bityutskiy's avatar Artem Bityutskiy Committed by David Woodhouse

mtd: docg3: initialize writebufsize

The writebufsize concept was introduce by commit
"0e4ca7e5 mtd: add writebufsize field to mtd_info struct" and it represents
the maximum amount of data the device writes to the media at a time. This is
an important parameter for UBIFS which is used during recovery and which
basically defines how big a corruption caused by a power cut can be.

Set it to be equivalent to mtd->writesize because this is the maximum amount
of data the driver writes at a time.
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
Cc: stable@kernel.org [3.2+]
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 71f60fbe
...@@ -1817,7 +1817,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd) ...@@ -1817,7 +1817,7 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES; mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
if (docg3->reliable == 2) if (docg3->reliable == 2)
mtd->erasesize /= 2; mtd->erasesize /= 2;
mtd->writesize = DOC_LAYOUT_PAGE_SIZE; mtd->writebufsize = mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
mtd->oobsize = DOC_LAYOUT_OOB_SIZE; mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
mtd->owner = THIS_MODULE; mtd->owner = THIS_MODULE;
mtd->_erase = doc_erase; mtd->_erase = doc_erase;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment