Commit 82cc4f5c authored by David S. Miller's avatar David S. Miller
parents 2a27a03d 56e6417b
......@@ -311,8 +311,10 @@ static void hci_uart_tty_close(struct tty_struct *tty)
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
hu->proto->close(hu);
hci_unregister_dev(hdev);
hci_free_dev(hdev);
if (hdev) {
hci_unregister_dev(hdev);
hci_free_dev(hdev);
}
}
}
}
......
......@@ -315,6 +315,7 @@ struct iwl_cfg iwl100_bgn_cfg = {
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.ht_params = &iwl1000_ht_params,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl100_bg_cfg = {
......@@ -330,6 +331,7 @@ struct iwl_cfg iwl100_bg_cfg = {
.ops = &iwl1000_ops,
.mod_params = &iwlagn_mod_params,
.base_params = &iwl1000_base_params,
.use_new_eeprom_reading = true,
};
MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
......
......@@ -561,6 +561,7 @@ struct iwl_cfg iwl6000g2a_2agn_cfg = {
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2a_2abg_cfg = {
......@@ -578,6 +579,7 @@ struct iwl_cfg iwl6000g2a_2abg_cfg = {
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2a_2bg_cfg = {
......@@ -595,6 +597,7 @@ struct iwl_cfg iwl6000g2a_2bg_cfg = {
.base_params = &iwl6000_base_params,
.need_dc_calib = true,
.need_temp_offset_calib = true,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2agn_cfg = {
......@@ -616,6 +619,7 @@ struct iwl_cfg iwl6000g2b_2agn_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2abg_cfg = {
......@@ -636,6 +640,7 @@ struct iwl_cfg iwl6000g2b_2abg_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2bgn_cfg = {
......@@ -657,6 +662,7 @@ struct iwl_cfg iwl6000g2b_2bgn_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_2bg_cfg = {
......@@ -677,6 +683,7 @@ struct iwl_cfg iwl6000g2b_2bg_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_bgn_cfg = {
......@@ -698,6 +705,7 @@ struct iwl_cfg iwl6000g2b_bgn_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6000g2b_bg_cfg = {
......@@ -718,6 +726,7 @@ struct iwl_cfg iwl6000g2b_bg_cfg = {
.need_temp_offset_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
/*
......@@ -804,6 +813,7 @@ struct iwl_cfg iwl6050g2_bgn_cfg = {
.base_params = &iwl6050_base_params,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
......@@ -857,6 +867,7 @@ struct iwl_cfg iwl130_bgn_cfg = {
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
struct iwl_cfg iwl130_bg_cfg = {
......@@ -876,6 +887,7 @@ struct iwl_cfg iwl130_bg_cfg = {
.need_dc_calib = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.use_new_eeprom_reading = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
......
......@@ -392,7 +392,7 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
/**
* iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
*/
void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv)
{
int eeprom_section_count = 0;
int section, element;
......@@ -419,7 +419,8 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
* always check for valid entry before process
* the information
*/
if (!enhanced_txpower->common || enhanced_txpower->reserved)
if (!(enhanced_txpower->flags || enhanced_txpower->channel) ||
enhanced_txpower->delta_20_in_40)
continue;
for (element = 0; element < eeprom_section_count; element++) {
......@@ -452,3 +453,86 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
}
}
}
static void
iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *txp,
s8 max_txpower_avg)
{
int ch_idx;
bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ;
enum ieee80211_band band;
band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) {
struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx];
/* update matching channel or from common data only */
if (txp->channel != 0 && ch_info->channel != txp->channel)
continue;
/* update matching band only */
if (band != ch_info->band)
continue;
if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) {
ch_info->max_power_avg = max_txpower_avg;
ch_info->curr_txpow = max_txpower_avg;
ch_info->scan_power = max_txpower_avg;
}
if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg)
ch_info->ht40_max_power_avg = max_txpower_avg;
}
}
#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
{
struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
int idx, entries;
__le16 *txp_len;
s8 max_txp_avg, max_txp_avg_halfdbm;
BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
/* the length is in 16-bit words, but we want entries */
txp_len = (__le16 *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_SZ_OFFS);
entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
for (idx = 0; idx < entries; idx++) {
txp = &txp_array[idx];
/* skip invalid entries */
if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
continue;
max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
&max_txp_avg_halfdbm);
/*
* Update the user limit values values to the highest
* power supported by any channel
*/
if (max_txp_avg > priv->tx_power_user_lmt)
priv->tx_power_user_lmt = max_txp_avg;
if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm)
priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm;
iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
}
}
void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
{
if (priv->cfg->use_new_eeprom_reading)
iwlcore_eeprom_enhanced_txpower_new(priv);
else
iwlcore_eeprom_enhanced_txpower_old(priv);
}
......@@ -569,6 +569,12 @@ static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
case INDIRECT_REGULATORY:
offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
break;
case INDIRECT_TXP_LIMIT:
offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT);
break;
case INDIRECT_TXP_LIMIT_SIZE:
offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE);
break;
case INDIRECT_CALIBRATION:
offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
break;
......
......@@ -390,6 +390,7 @@ struct iwl_cfg {
const bool need_temp_offset_calib; /* if used set to true */
u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
const bool use_new_eeprom_reading; /* temporary, remove later */
};
/***************************
......
......@@ -120,6 +120,17 @@ struct iwl_eeprom_channel {
s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */
} __packed;
enum iwl_eeprom_enhanced_txpwr_flags {
IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
};
/**
* iwl_eeprom_enhanced_txpwr structure
* This structure presents the enhanced regulatory tx power limit layout
......@@ -127,21 +138,23 @@ struct iwl_eeprom_channel {
* Enhanced regulatory tx power portion of eeprom image can be broken down
* into individual structures; each one is 8 bytes in size and contain the
* following information
* @common: (desc + channel) not used by driver, should _NOT_ be "zero"
* @flags: entry flags
* @channel: channel number
* @chain_a_max_pwr: chain a max power in 1/2 dBm
* @chain_b_max_pwr: chain b max power in 1/2 dBm
* @chain_c_max_pwr: chain c max power in 1/2 dBm
* @reserved: not used, should be "zero"
* @delta_20_in_40: 20-in-40 deltas (hi/lo)
* @mimo2_max_pwr: mimo2 max power in 1/2 dBm
* @mimo3_max_pwr: mimo3 max power in 1/2 dBm
*
*/
struct iwl_eeprom_enhanced_txpwr {
__le16 common;
u8 flags;
u8 channel;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
s8 reserved;
u8 delta_20_in_40;
s8 mimo2_max;
s8 mimo3_max;
} __packed;
......@@ -186,6 +199,8 @@ struct iwl_eeprom_enhanced_txpwr {
#define EEPROM_LINK_CALIBRATION (2*0x67)
#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
#define EEPROM_LINK_OTHERS (2*0x69)
#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
/* agn regulatory - indirect access */
#define EEPROM_REG_BAND_1_CHANNELS ((0x08)\
......@@ -389,6 +404,8 @@ struct iwl_eeprom_calib_info {
#define INDIRECT_CALIBRATION 0x00040000
#define INDIRECT_PROCESS_ADJST 0x00050000
#define INDIRECT_OTHERS 0x00060000
#define INDIRECT_TXP_LIMIT 0x00070000
#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
#define INDIRECT_ADDRESS 0x00100000
/* General */
......
......@@ -619,7 +619,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
print_ssid(ssid_buf, ssid, ssid_len),
LBS_SCAN_RSSI_TO_MBM(rssi)/100);
if (channel ||
if (channel &&
!(channel->flags & IEEE80211_CHAN_DISABLED))
cfg80211_inform_bss(wiphy, channel,
bssid, le64_to_cpu(*(__le64 *)tsfdesc),
......
......@@ -43,6 +43,7 @@ MODULE_FIRMWARE("isl3887usb");
static struct usb_device_id p54u_table[] __devinitdata = {
/* Version 1 devices (pci chip + net2280) */
{USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
{USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
......@@ -56,9 +57,13 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
{USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
{USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */
{USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */
{USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */
{USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
{USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */
{USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */
{USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */
{USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */
{USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */
{USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */
{USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */
......@@ -94,6 +99,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
{USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */
{USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
{USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
{USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
......
......@@ -311,6 +311,7 @@ static void rfcomm_dlc_clear_state(struct rfcomm_dlc *d)
d->state = BT_OPEN;
d->flags = 0;
d->mscex = 0;
d->sec_level = BT_SECURITY_LOW;
d->mtu = RFCOMM_DEFAULT_MTU;
d->v24_sig = RFCOMM_V24_RTC | RFCOMM_V24_RTR | RFCOMM_V24_DV;
......
......@@ -780,6 +780,9 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
mutex_lock(&sdata->u.ibss.mtx);
if (!sdata->u.ibss.ssid_len)
goto mgmt_out; /* not ready to merge yet */
switch (fc & IEEE80211_FCTL_STYPE) {
case IEEE80211_STYPE_PROBE_REQ:
ieee80211_rx_mgmt_probe_req(sdata, mgmt, skb->len);
......@@ -797,6 +800,7 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
break;
}
mgmt_out:
mutex_unlock(&sdata->u.ibss.mtx);
}
......
......@@ -1051,11 +1051,13 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_work *wk;
bool cleanup = false;
mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
if (wk->sdata != sdata)
continue;
cleanup = true;
wk->type = IEEE80211_WORK_ABORT;
wk->started = true;
wk->timeout = jiffies;
......@@ -1063,7 +1065,8 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
mutex_unlock(&local->mtx);
/* run cleanups etc. */
ieee80211_work_work(&local->work_work);
if (cleanup)
ieee80211_work_work(&local->work_work);
mutex_lock(&local->mtx);
list_for_each_entry(wk, &local->work_list, list) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment