media: staging: media: zoran: move videodev alloc

Move some code out of zr36057_init() and create new functions for handling
zr->video_dev. This permit to ease code reading and fix a zr->video_dev
memory leak.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

drivers/staging/media/zoran/zoran.h

@@ -315,6 +315,6 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)
 
 #endif
 
-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq);
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir);
 void zoran_queue_exit(struct zoran *zr);
 int zr_set_buf(struct zoran *zr);

drivers/staging/media/zoran/zoran_card.c

@@ -885,6 +885,52 @@ int zoran_check_jpg_settings(struct zoran *zr,
 	return 0;
 }
 
+static int zoran_init_video_device(struct zoran *zr, struct video_device *video_dev, int dir)
+{
+	int err;
+
+	/* Now add the template and register the device unit. */
+	*video_dev = zoran_template;
+	video_dev->v4l2_dev = &zr->v4l2_dev;
+	video_dev->lock = &zr->lock;
+	video_dev->device_caps = V4L2_CAP_STREAMING | dir;
+
+	strscpy(video_dev->name, ZR_DEVNAME(zr), sizeof(video_dev->name));
+	/*
+	 * It's not a mem2mem device, but you can both capture and output from one and the same
+	 * device. This should really be split up into two device nodes, but that's a job for
+	 * another day.
+	 */
+	video_dev->vfl_dir = VFL_DIR_M2M;
+	zoran_queue_init(zr, &zr->vq, V4L2_BUF_TYPE_VIDEO_CAPTURE);
+
+	err = video_register_device(video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
+	if (err < 0)
+		return err;
+	video_set_drvdata(video_dev, zr);
+	return 0;
+}
+
+static void zoran_exit_video_devices(struct zoran *zr)
+{
+	video_unregister_device(zr->video_dev);
+	kfree(zr->video_dev);
+}
+
+static int zoran_init_video_devices(struct zoran *zr)
+{
+	int err;
+
+	zr->video_dev = video_device_alloc();
+	if (!zr->video_dev)
+		return -ENOMEM;
+
+	err = zoran_init_video_device(zr, zr->video_dev, V4L2_CAP_VIDEO_CAPTURE);
+	if (err)
+		kfree(zr->video_dev);
+	return err;
+}
+
 void zoran_open_init_params(struct zoran *zr)
 {
 	int i;
@@ -956,17 +1002,11 @@ static int zr36057_init(struct zoran *zr)
 	zoran_open_init_params(zr);
 
 	/* allocate memory *before* doing anything to the hardware in case allocation fails */
-	zr->video_dev = video_device_alloc();
-	if (!zr->video_dev) {
-		err = -ENOMEM;
-		goto exit;
-	}
 	zr->stat_com = dma_alloc_coherent(&zr->pci_dev->dev,
 					  BUZ_NUM_STAT_COM * sizeof(u32),
 					  &zr->p_sc, GFP_KERNEL);
 	if (!zr->stat_com) {
-		err = -ENOMEM;
-		goto exit_video;
+		return -ENOMEM;
 	}
 	for (j = 0; j < BUZ_NUM_STAT_COM; j++)
 		zr->stat_com[j] = cpu_to_le32(1); /* mark as unavailable to zr36057 */
@@ -979,26 +1019,9 @@ static int zr36057_init(struct zoran *zr)
 		goto exit_statcom;
 	}
 
-	/* Now add the template and register the device unit. */
-	*zr->video_dev = zoran_template;
-	zr->video_dev->v4l2_dev = &zr->v4l2_dev;
-	zr->video_dev->lock = &zr->lock;
-	zr->video_dev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_CAPTURE;
-
-	strscpy(zr->video_dev->name, ZR_DEVNAME(zr), sizeof(zr->video_dev->name));
-	/*
-	 * It's not a mem2mem device, but you can both capture and output from one and the same
-	 * device. This should really be split up into two device nodes, but that's a job for
-	 * another day.
-	 */
-	zr->video_dev->vfl_dir = VFL_DIR_M2M;
-
-	zoran_queue_init(zr, &zr->vq);
-
-	err = video_register_device(zr->video_dev, VFL_TYPE_VIDEO, video_nr[zr->id]);
-	if (err < 0)
+	err = zoran_init_video_devices(zr);
+	if (err)
 		goto exit_statcomb;
-	video_set_drvdata(zr->video_dev, zr);
 
 	zoran_init_hardware(zr);
 	if (!pass_through) {
@@ -1013,9 +1036,6 @@ static int zr36057_init(struct zoran *zr)
 	dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
 exit_statcom:
 	dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32), zr->stat_com, zr->p_sc);
-exit_video:
-	kfree(zr->video_dev);
-exit:
 	return err;
 }
 
@@ -1050,7 +1070,7 @@ static void zoran_remove(struct pci_dev *pdev)
 	dma_free_coherent(&zr->pci_dev->dev, BUZ_NUM_STAT_COM * sizeof(u32) * 2, zr->stat_comb, zr->p_scb);
 	pci_release_regions(pdev);
 	pci_disable_device(zr->pci_dev);
-	video_unregister_device(zr->video_dev);
+	zoran_exit_video_devices(zr);
 exit_free:
 	v4l2_ctrl_handler_free(&zr->hdl);
 	v4l2_device_unregister(&zr->v4l2_dev);

drivers/staging/media/zoran/zoran_driver.c

@@ -1008,7 +1008,7 @@ static const struct vb2_ops zr_video_qops = {
 	.wait_finish            = vb2_ops_wait_finish,
 };
 
-int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
+int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq, int dir)
 {
 	int err;
 
@@ -1016,7 +1016,8 @@ int zoran_queue_init(struct zoran *zr, struct vb2_queue *vq)
 	INIT_LIST_HEAD(&zr->queued_bufs);
 
 	vq->dev = &zr->pci_dev->dev;
-	vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	vq->type = dir;
+
 	vq->io_modes = VB2_USERPTR | VB2_DMABUF | VB2_MMAP | VB2_READ | VB2_WRITE;
 	vq->drv_priv = zr;
 	vq->buf_struct_size = sizeof(struct zr_buffer);