Merge tag 'armsoc/for-3.15/soc-2' into armsoc/for-3.15/soc-3

ARM: mach-bcm soc updates

- add BCM5301x support
- remove GENERIC_TIME

Documentation/devicetree/bindings/arm/bcm4708.txt

+Broadcom BCM4708 device tree bindings
+-------------------------------------------
+
+Boards with the BCM4708 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm4708";

MAINTAINERS

@@ -1880,6 +1880,14 @@ F:	arch/arm/boot/dts/bcm2835*
 F:	arch/arm/configs/bcm2835_defconfig
 F:	drivers/*/*bcm2835*
 
+BROADCOM BCM5301X ARM ARCHICTURE
+M:	Hauke Mehrtens <hauke@hauke-m.de>
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	arch/arm/mach-bcm/bcm_5301x.c
+F:	arch/arm/boot/dts/bcm5301x.dtsi
+F:	arch/arm/boot/dts/bcm470*
+
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
 M:	Nithin Nayak Sujir <nsujir@broadcom.com>
 M:	Michael Chan <mchan@broadcom.com>

arch/arm/Kconfig.debug

@@ -106,6 +106,11 @@ choice
 		depends on ARCH_BCM2835
 		select DEBUG_UART_PL01X
 
+	config DEBUG_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X UART1"
+		depends on ARCH_BCM_5301X
+		select DEBUG_UART_PL01X
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
 		depends on ARCH_BCM
@@ -1023,6 +1028,7 @@ config DEBUG_UART_PHYS
 	default 0x101f1000 if ARCH_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
 	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x18000300 if DEBUG_BCM_5301X
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
@@ -1071,6 +1077,7 @@ config DEBUG_UART_VIRT
 	default 0xf0009000 if DEBUG_CNS3XXX
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
 	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf1000300 if DEBUG_BCM_5301X
 	default 0xf11f1000 if ARCH_VERSATILE
 	default 0xf1600000 if ARCH_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0

arch/arm/configs/multi_v7_defconfig

@@ -11,6 +11,7 @@ CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_MOBILE=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y

arch/arm/mach-bcm/Kconfig

@@ -19,7 +19,6 @@ config ARCH_BCM_MOBILE
 	select CPU_V7
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	select GPIO_BCM_KONA
 	select SPARSE_IRQ
 	select TICK_ONESHOT
@@ -32,6 +31,32 @@ config ARCH_BCM_MOBILE
 	  BCM11130, BCM11140, BCM11351, BCM28145 and
 	  BCM28155 variants.
 
+config ARCH_BCM_5301X
+	bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+	depends on MMU
+	select ARM_GIC
+	select CACHE_L2X0
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_SMP
+	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select MIGHT_HAVE_PCI
+	help
+	  Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+	  This is a network SoC line mostly used in home routers and
+	  wifi access points, it's internal name is Northstar.
+	  This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+	  BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+	  BCM4708 and BCM4709.
+
+	  Do not confuse this with the BCM4760 which is a totally
+	  different SoC or with the older BCM47XX and BCM53XX based
+	  network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
 endmenu
 
 endif

arch/arm/mach-bcm/Makefile

@@ -13,3 +13,4 @@
 obj-$(CONFIG_ARCH_BCM_MOBILE)	:= board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
 plus_sec := $(call as-instr,.arch_extension sec,+sec)
 AFLAGS_bcm_kona_smc_asm.o	:=-Wa,-march=armv7-a$(plus_sec)
+obj-$(CONFIG_ARCH_BCM_5301X)	+= bcm_5301x.o

arch/arm/mach-bcm/bcm_5301x.c

+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ *
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+
+static bool first_fault = true;
+
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
+				 struct pt_regs *regs)
+{
+	if (fsr == 0x1c06 && first_fault) {
+		first_fault = false;
+
+		/*
+		 * These faults with code 0x1c06 happens for no good reason,
+		 * possibly left over from the CFE boot loader.
+		 */
+		pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
+		addr, fsr);
+
+		/* Returning non-zero causes fault display and panic */
+		return 0;
+	}
+
+	/* Others should cause a fault */
+	return 1;
+}
+
+static void __init bcm5301x_init_early(void)
+{
+	/* Install our hook */
+	hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
+			"imprecise external abort");
+}
+
+static void __init bcm5301x_dt_init(void)
+{
+	l2x0_of_init(0, ~0UL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char __initconst *bcm5301x_dt_compat[] = {
+	"brcm,bcm4708",
+	NULL,
+};
+
+DT_MACHINE_START(BCM5301X, "BCM5301X")
+	.init_early	= bcm5301x_init_early,
+	.init_machine	= bcm5301x_dt_init,
+	.dt_compat	= bcm5301x_dt_compat,
+MACHINE_END