Commit 8354be9c authored by Frans Pop's avatar Frans Pop Committed by Benjamin Herrenschmidt

powerpc: Remove trailing space in messages

Signed-off-by: default avatarFrans Pop <elendil@planet.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 0b9612c2
......@@ -359,7 +359,7 @@ static void parse_system_parameter_string(struct seq_file *m)
unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!local_buffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
__FILE__, __func__, __LINE__);
return;
}
......@@ -383,13 +383,13 @@ static void parse_system_parameter_string(struct seq_file *m)
int idx, w_idx;
char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
if (!workbuffer) {
printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
printk(KERN_ERR "%s %s kmalloc failure at line %d\n",
__FILE__, __func__, __LINE__);
kfree(local_buffer);
return;
}
#ifdef LPARCFG_DEBUG
printk(KERN_INFO "success calling get-system-parameter \n");
printk(KERN_INFO "success calling get-system-parameter\n");
#endif
splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
local_buffer += 2; /* step over strlen value */
......@@ -440,7 +440,7 @@ static int lparcfg_count_active_processors(void)
while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) {
#ifdef LPARCFG_DEBUG
printk(KERN_ERR "cpus_dn %p \n", cpus_dn);
printk(KERN_ERR "cpus_dn %p\n", cpus_dn);
#endif
count++;
}
......@@ -725,7 +725,7 @@ static int lparcfg_data(struct seq_file *m, void *v)
const unsigned int *lp_index_ptr;
unsigned int lp_index = 0;
seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS);
seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS);
rootdn = of_find_node_by_path("/");
if (rootdn) {
......
......@@ -304,7 +304,7 @@ static void __devinit __of_scan_bus(struct device_node *node,
int reglen, devfn;
struct pci_dev *dev;
pr_debug("of_scan_bus(%s) bus no %d... \n",
pr_debug("of_scan_bus(%s) bus no %d...\n",
node->full_name, bus->number);
/* Scan direct children */
......
......@@ -134,7 +134,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m)
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: RPC Electronics STx \n");
seq_printf(m, "Vendor\t\t: RPC Electronics STx\n");
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
......
......@@ -85,7 +85,7 @@ static int proc_titantod_show(struct seq_file *m, void *v)
seq_printf(m, " titan elapsed = %lu uSec\n", titan_usec);
seq_printf(m, " tb elapsed = %lu ticks\n", tb_ticks);
seq_printf(m, " titan jiffies = %lu.%04lu \n", titan_jiffies,
seq_printf(m, " titan jiffies = %lu.%04lu\n", titan_jiffies,
titan_jiff_rem_usec);
seq_printf(m, " tb jiffies = %lu.%04lu\n", tb_jiffies,
tb_jiff_rem_usec);
......
......@@ -256,7 +256,7 @@ static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array,
mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array,
max_entries);
printk("Mainstore_VPD: numMemoryBlocks = %ld \n", mem_blocks);
printk("Mainstore_VPD: numMemoryBlocks = %ld\n", mem_blocks);
for (i = 0; i < mem_blocks; ++i) {
printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n"
" abs chunks %016lx - %016lx\n",
......
......@@ -539,7 +539,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
if (model
&& (strcmp(model, "iMac,1") == 0
|| strcmp(model, "PowerMac1,1") == 0)) {
bootx_printf("iMac,1 detected, shutting down USB \n");
bootx_printf("iMac,1 detected, shutting down USB\n");
out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */
}
}
......@@ -554,7 +554,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
} else
space = bi->totalParamsSize;
bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
bootx_printf("Total space used by parameters & ramdisk: 0x%x\n", space);
/* New BootX will have flushed all TLBs and enters kernel with
* MMU switched OFF, so this should not be useful anymore.
......
......@@ -478,9 +478,9 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
* due to actual, failed cards.
*/
printk(KERN_ERR
"EEH: PCI device at location=%s driver=%s pci addr=%s \n"
"EEH: PCI device at location=%s driver=%s pci addr=%s\n"
"has failed %d times in the last hour "
"and has been permanently disabled. \n"
"and has been permanently disabled.\n"
"Please try reseating this device or replacing it.\n",
location, drv_str, pci_str, frozen_pdn->eeh_freeze_count);
goto perm_error;
......@@ -488,7 +488,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
hard_fail:
printk(KERN_ERR
"EEH: Unable to recover from failure of PCI device "
"at location=%s driver=%s pci addr=%s \n"
"at location=%s driver=%s pci addr=%s\n"
"Please try reseating this device or replacing it.\n",
location, drv_str, pci_str);
......
......@@ -165,7 +165,7 @@ int remove_phb_dynamic(struct pci_controller *phb)
struct resource *res;
int rc, i;
pr_debug("PCI: Removing PHB %04x:%02x... \n",
pr_debug("PCI: Removing PHB %04x:%02x...\n",
pci_domain_nr(b), b->number);
/* We cannot to remove a root bus that has children */
......
......@@ -150,7 +150,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
/*set cpu state and hpte states as well scratch pad area */
printk(KERN_INFO " CPU AREA \n");
printk(KERN_INFO " CPU AREA\n");
printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
......@@ -161,7 +161,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
printk(KERN_INFO "cpu length_copied =%llx\n",
ph->cpu_data.length_copied);
printk(KERN_INFO " HPTE AREA \n");
printk(KERN_INFO " HPTE AREA\n");
printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
......@@ -172,7 +172,7 @@ static void print_dump_header(const struct phyp_dump_header *ph)
printk(KERN_INFO "HPTE length_copied =%llx\n",
ph->hpte_data.length_copied);
printk(KERN_INFO " SRSD AREA \n");
printk(KERN_INFO " SRSD AREA\n");
printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
......
......@@ -127,7 +127,7 @@ static inline unsigned int lpar_xirr_info_get(void)
lpar_rc = plpar_xirr(&return_value);
if (lpar_rc != H_SUCCESS)
panic(" bad return code xirr - rc = %lx \n", lpar_rc);
panic(" bad return code xirr - rc = %lx\n", lpar_rc);
return (unsigned int)return_value;
}
......
......@@ -1575,7 +1575,7 @@ void mpic_request_ipis(void)
int i;
BUG_ON(mpic == NULL);
printk(KERN_INFO "mpic: requesting IPIs ... \n");
printk(KERN_INFO "mpic: requesting IPIs...\n");
for (i = 0; i < 4; i++) {
unsigned int vipi = irq_create_mapping(mpic->irqhost,
......
......@@ -256,7 +256,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq,
struct irq_chip *chip;
if (qe_ic_info[hw].mask == 0) {
printk(KERN_ERR "Can't map reserved IRQ \n");
printk(KERN_ERR "Can't map reserved IRQ\n");
return -EINVAL;
}
/* Default chip */
......
......@@ -157,13 +157,13 @@ int par_io_of_config(struct device_node *np)
const unsigned int *pio_map;
if (par_io == NULL) {
printk(KERN_ERR "par_io not initialized \n");
printk(KERN_ERR "par_io not initialized\n");
return -1;
}
ph = of_get_property(np, "pio-handle", NULL);
if (ph == NULL) {
printk(KERN_ERR "pio-handle not available \n");
printk(KERN_ERR "pio-handle not available\n");
return -1;
}
......@@ -171,12 +171,12 @@ int par_io_of_config(struct device_node *np)
pio_map = of_get_property(pio, "pio-map", &pio_map_len);
if (pio_map == NULL) {
printk(KERN_ERR "pio-map is not set! \n");
printk(KERN_ERR "pio-map is not set!\n");
return -1;
}
pio_map_len /= sizeof(unsigned int);
if ((pio_map_len % 6) != 0) {
printk(KERN_ERR "pio-map format wrong! \n");
printk(KERN_ERR "pio-map format wrong!\n");
return -1;
}
......
......@@ -316,7 +316,7 @@ static void update_fans_speed (struct thermostat *th)
if (verbose)
printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
"(limit exceeded by %d on %s) \n",
"(limit exceeded by %d on %s)\n",
new_speed, var,
sensor_location[fan_number+1]);
write_both_fan_speed(th, new_speed);
......
......@@ -532,7 +532,7 @@ static void ps3av_set_videomode_packet(u32 id)
res = ps3av_cmd_avb_param(&avb_param, len);
if (res == PS3AV_STATUS_NO_SYNC_HEAD)
printk(KERN_WARNING
"%s: Command failed. Please try your request again. \n",
"%s: Command failed. Please try your request again.\n",
__func__);
else if (res)
dev_dbg(&ps3av->dev->core, "ps3av_cmd_avb_param failed\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment