Commit 83ee102a authored by Doug Berger's avatar Doug Berger Committed by David S. Miller

net: phy: bcm7xxx: add support for 28nm EPHY

This commit adds support for the internal fast ethernet 10/100 PHY
found in the BCM7260, BCM7268, and BCM7271 devices.
Signed-off-by: default avatarDoug Berger <opendmb@gmail.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent cda792c3
/* /*
* Broadcom BCM7xxx internal transceivers support. * Broadcom BCM7xxx internal transceivers support.
* *
* Copyright (C) 2014, Broadcom Corporation * Copyright (C) 2014-2017 Broadcom
* *
* This program is free software; you can redistribute it and/or * This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License * modify it under the terms of the GNU General Public License
...@@ -19,7 +19,7 @@ ...@@ -19,7 +19,7 @@
/* Broadcom BCM7xxx internal PHY registers */ /* Broadcom BCM7xxx internal PHY registers */
/* 40nm only register definitions */ /* EPHY only register definitions */
#define MII_BCM7XXX_100TX_AUX_CTL 0x10 #define MII_BCM7XXX_100TX_AUX_CTL 0x10
#define MII_BCM7XXX_100TX_FALSE_CAR 0x13 #define MII_BCM7XXX_100TX_FALSE_CAR 0x13
#define MII_BCM7XXX_100TX_DISC 0x14 #define MII_BCM7XXX_100TX_DISC 0x14
...@@ -27,6 +27,19 @@ ...@@ -27,6 +27,19 @@
#define MII_BCM7XXX_64CLK_MDIO BIT(12) #define MII_BCM7XXX_64CLK_MDIO BIT(12)
#define MII_BCM7XXX_TEST 0x1f #define MII_BCM7XXX_TEST 0x1f
#define MII_BCM7XXX_SHD_MODE_2 BIT(2) #define MII_BCM7XXX_SHD_MODE_2 BIT(2)
#define MII_BCM7XXX_SHD_2_ADDR_CTRL 0xe
#define MII_BCM7XXX_SHD_2_CTRL_STAT 0xf
#define MII_BCM7XXX_SHD_2_BIAS_TRIM 0x1a
#define MII_BCM7XXX_SHD_3_AN_EEE_ADV 0x3
#define MII_BCM7XXX_SHD_3_PCS_CTRL_2 0x6
#define MII_BCM7XXX_PCS_CTRL_2_DEF 0x4400
#define MII_BCM7XXX_SHD_3_AN_STAT 0xb
#define MII_BCM7XXX_AN_NULL_MSG_EN BIT(0)
#define MII_BCM7XXX_AN_EEE_EN BIT(1)
#define MII_BCM7XXX_SHD_3_EEE_THRESH 0xe
#define MII_BCM7XXX_EEE_THRESH_DEF 0x50
#define MII_BCM7XXX_SHD_3_TL4 0x23
#define MII_BCM7XXX_TL4_RST_MSK (BIT(2) | BIT(1))
/* 28nm only register definitions */ /* 28nm only register definitions */
#define MISC_ADDR(base, channel) base, channel #define MISC_ADDR(base, channel) base, channel
...@@ -286,6 +299,181 @@ static int phy_set_clr_bits(struct phy_device *dev, int location, ...@@ -286,6 +299,181 @@ static int phy_set_clr_bits(struct phy_device *dev, int location,
return v; return v;
} }
static int bcm7xxx_28nm_ephy_01_afe_config_init(struct phy_device *phydev)
{
int ret;
/* set shadow mode 2 */
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
MII_BCM7XXX_SHD_MODE_2, 0);
if (ret < 0)
return ret;
/* Set current trim values INT_trim = -1, Ext_trim =0 */
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_BIAS_TRIM, 0x3BE0);
if (ret < 0)
goto reset_shadow_mode;
/* Cal reset */
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
MII_BCM7XXX_SHD_3_TL4);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
MII_BCM7XXX_TL4_RST_MSK, 0);
if (ret < 0)
goto reset_shadow_mode;
/* Cal reset disable */
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
MII_BCM7XXX_SHD_3_TL4);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
0, MII_BCM7XXX_TL4_RST_MSK);
if (ret < 0)
goto reset_shadow_mode;
reset_shadow_mode:
/* reset shadow mode 2 */
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
MII_BCM7XXX_SHD_MODE_2);
if (ret < 0)
return ret;
return 0;
}
/* The 28nm EPHY does not support Clause 45 (MMD) used by bcm-phy-lib */
static int bcm7xxx_28nm_ephy_apd_enable(struct phy_device *phydev)
{
int ret;
/* set shadow mode 1 */
ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST,
MII_BRCM_FET_BT_SRE, 0);
if (ret < 0)
return ret;
/* Enable auto-power down */
ret = phy_set_clr_bits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
MII_BRCM_FET_SHDW_AS2_APDE, 0);
if (ret < 0)
return ret;
/* reset shadow mode 1 */
ret = phy_set_clr_bits(phydev, MII_BRCM_FET_BRCMTEST, 0,
MII_BRCM_FET_BT_SRE);
if (ret < 0)
return ret;
return 0;
}
static int bcm7xxx_28nm_ephy_eee_enable(struct phy_device *phydev)
{
int ret;
/* set shadow mode 2 */
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST,
MII_BCM7XXX_SHD_MODE_2, 0);
if (ret < 0)
return ret;
/* Advertise supported modes */
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
MII_BCM7XXX_SHD_3_AN_EEE_ADV);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
MDIO_EEE_100TX);
if (ret < 0)
goto reset_shadow_mode;
/* Restore Defaults */
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
MII_BCM7XXX_SHD_3_PCS_CTRL_2);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
MII_BCM7XXX_PCS_CTRL_2_DEF);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
MII_BCM7XXX_SHD_3_EEE_THRESH);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
MII_BCM7XXX_EEE_THRESH_DEF);
if (ret < 0)
goto reset_shadow_mode;
/* Enable EEE autonegotiation */
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_ADDR_CTRL,
MII_BCM7XXX_SHD_3_AN_STAT);
if (ret < 0)
goto reset_shadow_mode;
ret = phy_write(phydev, MII_BCM7XXX_SHD_2_CTRL_STAT,
(MII_BCM7XXX_AN_NULL_MSG_EN | MII_BCM7XXX_AN_EEE_EN));
if (ret < 0)
goto reset_shadow_mode;
reset_shadow_mode:
/* reset shadow mode 2 */
ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0,
MII_BCM7XXX_SHD_MODE_2);
if (ret < 0)
return ret;
/* Restart autoneg */
phy_write(phydev, MII_BMCR,
(BMCR_SPEED100 | BMCR_ANENABLE | BMCR_ANRESTART));
return 0;
}
static int bcm7xxx_28nm_ephy_config_init(struct phy_device *phydev)
{
u8 rev = phydev->phy_id & ~phydev->drv->phy_id_mask;
int ret = 0;
pr_info_once("%s: %s PHY revision: 0x%02x\n",
phydev_name(phydev), phydev->drv->name, rev);
/* Dummy read to a register to workaround a possible issue upon reset
* where the internal inverter may not allow the first MDIO transaction
* to pass the MDIO management controller and make us return 0xffff for
* such reads.
*/
phy_read(phydev, MII_BMSR);
/* Apply AFE software work-around if necessary */
if (rev == 0x01) {
ret = bcm7xxx_28nm_ephy_01_afe_config_init(phydev);
if (ret)
return ret;
}
ret = bcm7xxx_28nm_ephy_eee_enable(phydev);
if (ret)
return ret;
return bcm7xxx_28nm_ephy_apd_enable(phydev);
}
static int bcm7xxx_28nm_ephy_resume(struct phy_device *phydev)
{
int ret;
/* Re-apply workarounds coming out suspend/resume */
ret = bcm7xxx_28nm_ephy_config_init(phydev);
if (ret)
return ret;
return genphy_config_aneg(phydev);
}
static int bcm7xxx_config_init(struct phy_device *phydev) static int bcm7xxx_config_init(struct phy_device *phydev)
{ {
int ret; int ret;
...@@ -434,6 +622,23 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev) ...@@ -434,6 +622,23 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.probe = bcm7xxx_28nm_probe, \ .probe = bcm7xxx_28nm_probe, \
} }
#define BCM7XXX_28NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
.phy_id_mask = 0xfffffff0, \
.name = _name, \
.features = PHY_BASIC_FEATURES, \
.flags = PHY_IS_INTERNAL, \
.config_init = bcm7xxx_28nm_ephy_config_init, \
.config_aneg = genphy_config_aneg, \
.read_status = genphy_read_status, \
.resume = bcm7xxx_28nm_ephy_resume, \
.get_sset_count = bcm_phy_get_sset_count, \
.get_strings = bcm_phy_get_strings, \
.get_stats = bcm7xxx_28nm_get_phy_stats, \
.probe = bcm7xxx_28nm_probe, \
}
#define BCM7XXX_40NM_EPHY(_oui, _name) \ #define BCM7XXX_40NM_EPHY(_oui, _name) \
{ \ { \
.phy_id = (_oui), \ .phy_id = (_oui), \
...@@ -450,6 +655,9 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev) ...@@ -450,6 +655,9 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
static struct phy_driver bcm7xxx_driver[] = { static struct phy_driver bcm7xxx_driver[] = {
BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"),
BCM7XXX_28NM_EPHY(PHY_ID_BCM7260, "Broadcom BCM7260"),
BCM7XXX_28NM_EPHY(PHY_ID_BCM7268, "Broadcom BCM7268"),
BCM7XXX_28NM_EPHY(PHY_ID_BCM7271, "Broadcom BCM7271"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"),
BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"),
...@@ -466,6 +674,9 @@ static struct phy_driver bcm7xxx_driver[] = { ...@@ -466,6 +674,9 @@ static struct phy_driver bcm7xxx_driver[] = {
static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
{ PHY_ID_BCM7250, 0xfffffff0, }, { PHY_ID_BCM7250, 0xfffffff0, },
{ PHY_ID_BCM7260, 0xfffffff0, },
{ PHY_ID_BCM7268, 0xfffffff0, },
{ PHY_ID_BCM7271, 0xfffffff0, },
{ PHY_ID_BCM7278, 0xfffffff0, }, { PHY_ID_BCM7278, 0xfffffff0, },
{ PHY_ID_BCM7364, 0xfffffff0, }, { PHY_ID_BCM7364, 0xfffffff0, },
{ PHY_ID_BCM7366, 0xfffffff0, }, { PHY_ID_BCM7366, 0xfffffff0, },
......
...@@ -25,6 +25,9 @@ ...@@ -25,6 +25,9 @@
#define PHY_ID_BCM57780 0x03625d90 #define PHY_ID_BCM57780 0x03625d90
#define PHY_ID_BCM7250 0xae025280 #define PHY_ID_BCM7250 0xae025280
#define PHY_ID_BCM7260 0xae025190
#define PHY_ID_BCM7268 0xae025090
#define PHY_ID_BCM7271 0xae0253b0
#define PHY_ID_BCM7278 0xae0251a0 #define PHY_ID_BCM7278 0xae0251a0
#define PHY_ID_BCM7364 0xae025260 #define PHY_ID_BCM7364 0xae025260
#define PHY_ID_BCM7366 0x600d8490 #define PHY_ID_BCM7366 0x600d8490
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment