drm/i915: Don't use link_bw for PLL setup

Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.

v2: Fix typo in commit message (Sivakumar)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_ddi.c

@@ -1579,17 +1579,14 @@ skl_ddi_pll_select(struct intel_crtc *intel_crtc,
 			 DPLL_CFGCR2_PDIV(wrpll_params.pdiv) |
 			 wrpll_params.central_freq;
 	} else if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) {
-		struct drm_encoder *encoder = &intel_encoder->base;
-		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
-		switch (intel_dp->link_bw) {
-		case DP_LINK_BW_1_62:
+		switch (crtc_state->port_clock / 2) {
+		case 81000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, 0);
 			break;
-		case DP_LINK_BW_2_7:
+		case 135000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, 0);
 			break;
-		case DP_LINK_BW_5_4:
+		case 270000:
 			ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, 0);
 			break;
 		}

drivers/gpu/drm/i915/intel_dp.c

@@ -48,28 +48,28 @@
 #define INTEL_DP_RESOLUTION_FAILSAFE	(3 << INTEL_DP_RESOLUTION_SHIFT_MASK)
 
 struct dp_link_dpll {
-	int link_bw;
+	int clock;
 	struct dpll dpll;
 };
 
 static const struct dp_link_dpll gen4_dpll[] = {
-	{ DP_LINK_BW_1_62,
+	{ 162000,
 		{ .p1 = 2, .p2 = 10, .n = 2, .m1 = 23, .m2 = 8 } },
-	{ DP_LINK_BW_2_7,
+	{ 270000,
 		{ .p1 = 1, .p2 = 10, .n = 1, .m1 = 14, .m2 = 2 } }
 };
 
 static const struct dp_link_dpll pch_dpll[] = {
-	{ DP_LINK_BW_1_62,
+	{ 162000,
 		{ .p1 = 2, .p2 = 10, .n = 1, .m1 = 12, .m2 = 9 } },
-	{ DP_LINK_BW_2_7,
+	{ 270000,
 		{ .p1 = 1, .p2 = 10, .n = 2, .m1 = 14, .m2 = 8 } }
 };
 
 static const struct dp_link_dpll vlv_dpll[] = {
-	{ DP_LINK_BW_1_62,
+	{ 162000,
 		{ .p1 = 3, .p2 = 2, .n = 5, .m1 = 3, .m2 = 81 } },
-	{ DP_LINK_BW_2_7,
+	{ 270000,
 		{ .p1 = 2, .p2 = 2, .n = 1, .m1 = 2, .m2 = 27 } }
 };
 
@@ -83,11 +83,11 @@ static const struct dp_link_dpll chv_dpll[] = {
 	 * m2 is stored in fixed point format using formula below
 	 * (m2_int << 22) | m2_fraction
 	 */
-	{ DP_LINK_BW_1_62,	/* m2_int = 32, m2_fraction = 1677722 */
+	{ 162000,	/* m2_int = 32, m2_fraction = 1677722 */
 		{ .p1 = 4, .p2 = 2, .n = 1, .m1 = 2, .m2 = 0x819999a } },
-	{ DP_LINK_BW_2_7,	/* m2_int = 27, m2_fraction = 0 */
+	{ 270000,	/* m2_int = 27, m2_fraction = 0 */
 		{ .p1 = 4, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } },
-	{ DP_LINK_BW_5_4,	/* m2_int = 27, m2_fraction = 0 */
+	{ 540000,	/* m2_int = 27, m2_fraction = 0 */
 		{ .p1 = 2, .p2 = 1, .n = 1, .m1 = 2, .m2 = 0x6c00000 } }
 };
 
@@ -1133,7 +1133,7 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
 }
 
 static void
-skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
+skl_edp_set_pll_config(struct intel_crtc_state *pipe_config)
 {
 	u32 ctrl1;
 
@@ -1145,7 +1145,7 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
 	pipe_config->dpll_hw_state.cfgcr2 = 0;
 
 	ctrl1 = DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
-	switch (link_clock / 2) {
+	switch (pipe_config->port_clock / 2) {
 	case 81000:
 		ctrl1 |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
 					      SKL_DPLL0);
@@ -1179,19 +1179,19 @@ skl_edp_set_pll_config(struct intel_crtc_state *pipe_config, int link_clock)
 }
 
 static void
-hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config, int link_bw)
+hsw_dp_set_ddi_pll_sel(struct intel_crtc_state *pipe_config)
 {
 	memset(&pipe_config->dpll_hw_state, 0,
 	       sizeof(pipe_config->dpll_hw_state));
 
-	switch (link_bw) {
-	case DP_LINK_BW_1_62:
+	switch (pipe_config->port_clock / 2) {
+	case 81000:
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
 		break;
-	case DP_LINK_BW_2_7:
+	case 135000:
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
 		break;
-	case DP_LINK_BW_5_4:
+	case 270000:
 		pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
 		break;
 	}
@@ -1238,7 +1238,7 @@ intel_dp_source_rates(struct drm_device *dev, const int **source_rates)
 
 static void
 intel_dp_set_clock(struct intel_encoder *encoder,
-		   struct intel_crtc_state *pipe_config, int link_bw)
+		   struct intel_crtc_state *pipe_config)
 {
 	struct drm_device *dev = encoder->base.dev;
 	const struct dp_link_dpll *divisor = NULL;
@@ -1260,7 +1260,7 @@ intel_dp_set_clock(struct intel_encoder *encoder,
 
 	if (divisor && count) {
 		for (i = 0; i < count; i++) {
-			if (link_bw == divisor[i].link_bw) {
+			if (pipe_config->port_clock == divisor[i].clock) {
 				pipe_config->dpll = divisor[i].dpll;
 				pipe_config->clock_set = true;
 				break;
@@ -1535,13 +1535,13 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 	}
 
 	if (IS_SKYLAKE(dev) && is_edp(intel_dp))
-		skl_edp_set_pll_config(pipe_config, common_rates[clock]);
+		skl_edp_set_pll_config(pipe_config);
 	else if (IS_BROXTON(dev))
 		/* handled in ddi */;
 	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
+		hsw_dp_set_ddi_pll_sel(pipe_config);
 	else
-		intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
+		intel_dp_set_clock(encoder, pipe_config);
 
 	return true;
 }