Commit 84237a82 authored by Alex Williamson's avatar Alex Williamson

vfio-pci: Add support for VGA region access

PCI defines display class VGA regions at I/O port address 0x3b0, 0x3c0
and MMIO address 0xa0000.  As these are non-overlapping, we can ignore
the I/O port vs MMIO difference and expose them both in a single
region.  We make use of the VGA arbiter around each access to
configure chipset access as necessary.
Signed-off-by: default avatarAlex Williamson <alex.williamson@redhat.com>
parent 2dd11948
......@@ -6,3 +6,13 @@ config VFIO_PCI
use of PCI drivers using the VFIO framework.
If you don't know what to do here, say N.
config VFIO_PCI_VGA
bool "VFIO PCI support for VGA devices"
depends on VFIO_PCI && X86 && VGA_ARB && EXPERIMENTAL
help
Support for VGA extension to VFIO PCI. This exposes an additional
region on VGA devices for accessing legacy VGA addresses used by
BIOS and generic video drivers.
If you don't know what to do here, say N.
......@@ -84,6 +84,11 @@ static int vfio_pci_enable(struct vfio_pci_device *vdev)
} else
vdev->msix_bar = 0xFF;
#ifdef CONFIG_VFIO_PCI_VGA
if ((pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA)
vdev->has_vga = true;
#endif
return 0;
}
......@@ -285,6 +290,16 @@ static long vfio_pci_ioctl(void *device_data,
info.flags = VFIO_REGION_INFO_FLAG_READ;
break;
}
case VFIO_PCI_VGA_REGION_INDEX:
if (!vdev->has_vga)
return -EINVAL;
info.offset = VFIO_PCI_INDEX_TO_OFFSET(info.index);
info.size = 0xc0000;
info.flags = VFIO_REGION_INFO_FLAG_READ |
VFIO_REGION_INFO_FLAG_WRITE;
break;
default:
return -EINVAL;
}
......@@ -386,6 +401,9 @@ static ssize_t vfio_pci_rw(void *device_data, char __user *buf,
case VFIO_PCI_BAR0_REGION_INDEX ... VFIO_PCI_BAR5_REGION_INDEX:
return vfio_pci_bar_rw(vdev, buf, count, ppos, iswrite);
case VFIO_PCI_VGA_REGION_INDEX:
return vfio_pci_vga_rw(vdev, buf, count, ppos, iswrite);
}
return -EINVAL;
......
......@@ -53,6 +53,7 @@ struct vfio_pci_device {
bool reset_works;
bool extended_caps;
bool bardirty;
bool has_vga;
struct pci_saved_state *pci_saved_state;
atomic_t refcnt;
};
......@@ -77,6 +78,9 @@ extern ssize_t vfio_pci_config_rw(struct vfio_pci_device *vdev,
extern ssize_t vfio_pci_bar_rw(struct vfio_pci_device *vdev, char __user *buf,
size_t count, loff_t *ppos, bool iswrite);
extern ssize_t vfio_pci_vga_rw(struct vfio_pci_device *vdev, char __user *buf,
size_t count, loff_t *ppos, bool iswrite);
extern int vfio_pci_init_perm_bits(void);
extern void vfio_pci_uninit_perm_bits(void);
......
......@@ -17,6 +17,7 @@
#include <linux/pci.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/vgaarb.h>
#include "vfio_pci_private.h"
......@@ -175,3 +176,63 @@ ssize_t vfio_pci_bar_rw(struct vfio_pci_device *vdev, char __user *buf,
return done;
}
ssize_t vfio_pci_vga_rw(struct vfio_pci_device *vdev, char __user *buf,
size_t count, loff_t *ppos, bool iswrite)
{
int ret;
loff_t off, pos = *ppos & VFIO_PCI_OFFSET_MASK;
void __iomem *iomem = NULL;
unsigned int rsrc;
bool is_ioport;
ssize_t done;
if (!vdev->has_vga)
return -EINVAL;
switch (pos) {
case 0xa0000 ... 0xbffff:
count = min(count, (size_t)(0xc0000 - pos));
iomem = ioremap_nocache(0xa0000, 0xbffff - 0xa0000 + 1);
off = pos - 0xa0000;
rsrc = VGA_RSRC_LEGACY_MEM;
is_ioport = false;
break;
case 0x3b0 ... 0x3bb:
count = min(count, (size_t)(0x3bc - pos));
iomem = ioport_map(0x3b0, 0x3bb - 0x3b0 + 1);
off = pos - 0x3b0;
rsrc = VGA_RSRC_LEGACY_IO;
is_ioport = true;
break;
case 0x3c0 ... 0x3df:
count = min(count, (size_t)(0x3e0 - pos));
iomem = ioport_map(0x3c0, 0x3df - 0x3c0 + 1);
off = pos - 0x3c0;
rsrc = VGA_RSRC_LEGACY_IO;
is_ioport = true;
break;
default:
return -EINVAL;
}
if (!iomem)
return -ENOMEM;
ret = vga_get_interruptible(vdev->pdev, rsrc);
if (ret) {
is_ioport ? ioport_unmap(iomem) : iounmap(iomem);
return ret;
}
done = do_io_rw(iomem, buf, off, count, 0, 0, iswrite);
vga_put(vdev->pdev, rsrc);
is_ioport ? ioport_unmap(iomem) : iounmap(iomem);
if (done >= 0)
*ppos += done;
return done;
}
......@@ -303,6 +303,15 @@ enum {
VFIO_PCI_BAR5_REGION_INDEX,
VFIO_PCI_ROM_REGION_INDEX,
VFIO_PCI_CONFIG_REGION_INDEX,
/*
* Expose VGA regions defined for PCI base class 03, subclass 00.
* This includes I/O port ranges 0x3b0 to 0x3bb and 0x3c0 to 0x3df
* as well as the MMIO range 0xa0000 to 0xbffff. Each implemented
* range is found at it's identity mapped offset from the region
* offset, for example 0x3b0 is region_info.offset + 0x3b0. Areas
* between described ranges are unimplemented.
*/
VFIO_PCI_VGA_REGION_INDEX,
VFIO_PCI_NUM_REGIONS
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment