Commit 8449fd76 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Mark Brown

spi: rspi: Merge rspi_send_pio() and rspi_receive_pio()

rspi_send_pio() and rspi_receive_pio() are very similar:
  - the former only sends data, using TX Only Mode,
  - the latter sends and receives full duplex data to/from the hardware,
    but uses dummy transmit data.
Merge them into rspi_transfer_out_in(), now supporting full duplex if
needed.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent eb557f75
......@@ -389,27 +389,6 @@ static int rspi_data_out_in(struct rspi_data *rspi, u8 data)
return rspi_data_in(rspi);
}
static int rspi_send_pio(struct rspi_data *rspi, struct spi_transfer *t)
{
int remain = t->len, ret;
const u8 *data = t->tx_buf;
while (remain > 0) {
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD,
RSPI_SPCR);
ret = rspi_data_out(rspi, *data++);
if (ret < 0)
return ret;
remain--;
}
/* Waiting for the last transmission */
rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
return 0;
}
static int qspi_send_pio(struct rspi_data *rspi, struct spi_transfer *t)
{
int remain = t->len, ret;
......@@ -563,28 +542,6 @@ static void rspi_receive_init(const struct rspi_data *rspi)
RSPI_SPSR);
}
static int rspi_receive_pio(struct rspi_data *rspi, struct spi_transfer *t)
{
int remain = t->len, ret;
u8 *data = t->rx_buf;
rspi_receive_init(rspi);
while (remain > 0) {
rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD,
RSPI_SPCR);
/* dummy write data for generate clock */
ret = rspi_data_out_in(rspi, DUMMY_DATA);
if (ret < 0)
return ret;
*data++ = ret;
remain--;
}
return 0;
}
static void qspi_receive_init(const struct rspi_data *rspi)
{
u8 spsr;
......@@ -729,27 +686,61 @@ static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t)
return 0;
}
static int rspi_transfer_out_in(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
int remain = xfer->len, ret;
const u8 *tx_buf = xfer->tx_buf;
u8 *rx_buf = xfer->rx_buf;
u8 spcr, data;
rspi_receive_init(rspi);
spcr = rspi_read8(rspi, RSPI_SPCR);
if (rx_buf)
spcr &= ~SPCR_TXMD;
else
spcr |= SPCR_TXMD;
rspi_write8(rspi, spcr, RSPI_SPCR);
while (remain > 0) {
data = tx_buf ? *tx_buf++ : DUMMY_DATA;
ret = rspi_data_out(rspi, data);
if (ret < 0)
return ret;
if (rx_buf) {
ret = rspi_data_in(rspi);
if (ret < 0)
return ret;
*rx_buf++ = ret;
}
remain--;
}
/* Wait for the last transmission */
rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE);
return 0;
}
static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
struct rspi_data *rspi = spi_master_get_devdata(master);
int ret = 0;
int ret;
if (!rspi_is_dma(rspi, xfer))
return rspi_transfer_out_in(rspi, xfer);
if (xfer->tx_buf) {
if (rspi_is_dma(rspi, xfer))
ret = rspi_send_dma(rspi, xfer);
else
ret = rspi_send_pio(rspi, xfer);
ret = rspi_send_dma(rspi, xfer);
if (ret < 0)
return ret;
}
if (xfer->rx_buf) {
if (rspi_is_dma(rspi, xfer))
ret = rspi_receive_dma(rspi, xfer);
else
ret = rspi_receive_pio(rspi, xfer);
}
return ret;
if (xfer->rx_buf)
return rspi_receive_dma(rspi, xfer);
return 0;
}
static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment