SCSI: Add FC transport host attributes
From: James.Smart@Emulex.Com
This patch updates the fc_transport with attributes for local FC ports
(e.g. Hosts). The port attributes are defined per HBAAPI v2.0 definitions.
This patch results in the following in /sys/class:
-----------------------------------------------------
[jsmart@elxware class]$ cd /sys/class
[jsmart@elxware class]$ ls
fc_host graphics misc pci_bus scsi_host usb_host
fc_transport input net scsi_device tty vc
firmware mem netlink scsi_generic usb
[jsmart@elxware class]$ cd fc_host
[jsmart@elxware fc_host]$ ls
host4
[jsmart@elxware fc_host]$ cd host4
[jsmart@elxware host4]$ ls
device host_port_maxframe_size host_port_supported_speeds
host_fabric_name host_port_name host_port_symbolic_name
host_link_down_tmo host_port_speed host_port_type
host_node_name host_port_state host_tgtid_bind_type
host_port_active_fc4s host_port_supported_classes statistics
host_port_id host_port_supported_fc4s
[jsmart@elxware host4]$ ls -ld *
lrwxrwxrwx 1 root root 0 Oct 13 18:24 device -> ../../../devices/platform/host4
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_fabric_name
-rw-r--r-- 1 root root 4096 Oct 13 18:24 host_link_down_tmo
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_node_name
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_active_fc4s
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_id
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_maxframe_size
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_name
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_speed
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_state
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_classes
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_fc4s
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_speeds
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_symbolic_name
-r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_type
-rw-r--r-- 1 root root 4096 Oct 13 18:24 host_tgtid_bind_type
drwxr-xr-x 2 root root 0 Oct 13 18:24 statistics
Using the following script (/tmp/show_attributes):
#!/bin/sh
FILES=`ls *`
for file in $FILES; do
if [ -f $file ] ; then
echo "$file : " `cat $file`
fi
done
Here's a sample of querying the attributes:
[jsmart@elxware /]$ cd /sys/class/fc_host/host4
[jsmart@elxware host4]$ /tmp/show_attributes
host_fabric_name : 0x33334444ffeeddcc
host_link_down_tmo : 30
host_node_name : 0x78563412aabbccdd
host_port_active_fc4s : hex: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f
host_port_id : 0x789abc
host_port_maxframe_size : 2511 bytes
host_port_name : 0xefcdab9011223344
host_port_speed : 2 Gbit
host_port_state : Online
host_port_supported_classes : Class 2, Class 3
host_port_supported_fc4s : hex: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f
host_port_supported_speeds : 2 Gbit, 4 Gbit, 10 Gbit
host_port_symbolic_name : LP9052 Dual Port Adapter
host_port_type : NPort (fabric via point-to-point)
host_tgtid_bind_type : wwpn (World Wide Port Name)
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Showing
This diff is collapsed.
Please register or sign in to comment