Merge branch 'samsung/soc' into next/soc2

* samsung/soc:
  ARM: EXYNOS: fix cycle count for periodic mode of clock event timers
  ARM: EXYNOS: add support JPEG
  ARM: EXYNOS: Add DMC1, allow PPMU access for DMC
  ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition
  ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata()
  ARM: SAMSUNG: Add __init attribute to samsung_bl_set()
  ARM: S5PV210: Add usb otg phy control
  ARM: S3C64XX: Add usb otg phy control
  ARM: EXYNOS: Enable l2 configuration through device tree
  ARM: EXYNOS: remove useless code to save/restore L2
  ARM: EXYNOS: save L2 settings during bootup
  ARM: S5P: add L2 early resume code
  ARM: EXYNOS: Add support AFTR mode on EXYNOS4210
  ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable}
  ARM: S3C64XX: Define some additional always off clocks
  ARM: S3C64XX: Reduce residency requirement for cpuidle WFI mode
  ARM: SAMSUNG: Add a callback 'notify_after' for PWM backlight control
  ARM: SAMSUNG: add G2D to plat-s5p and mach-exynos
  ARM: S3C64XX: Gate some more clocks by default
  ARM: S3C64XX: Add basic cpuidle driver

Conflicts:
	arch/arm/mach-exynos/clock.c
	arch/arm/mach-exynos/common.c

This merges the earlier samsung support into the next/soc2 branch to
resolve conflicts between commits in the earlier work and the exynos5
branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-exynos/clock-exynos4.c

@@ -470,6 +470,11 @@ static struct clk exynos4_init_clocks_off[] = {
 		.devname	= "s5p-mipi-csis.1",
 		.enable		= exynos4_clk_ip_cam_ctrl,
 		.ctrlbit	= (1 << 5),
+	}, {
+		.name		= "jpeg",
+		.id		= 0,
+		.enable		= exynos4_clk_ip_cam_ctrl,
+		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "fimc",
 		.devname	= "exynos4-fimc.0",

arch/arm/mach-exynos/common.c

@@ -26,10 +26,12 @@
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/cacheflush.h>
 
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-gpio.h>
+#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
@@ -45,6 +47,8 @@
 #include <plat/regs-serial.h>
 
 #include "common.h"
+#define L2_AUX_VAL 0x7C470001
+#define L2_AUX_MASK 0xC200ffff
 
 static const char name_exynos4210[] = "EXYNOS4210";
 static const char name_exynos4212[] = "EXYNOS4212";
@@ -189,7 +193,12 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 	}, {
 		.virtual	= (unsigned long)S5P_VA_DMC0,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC0),
-		.length		= SZ_4K,
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC1,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_DMC1),
+		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
@@ -592,23 +601,48 @@ static int __init exynos4_l2x0_cache_init(void)
 	if (soc_is_exynos5250())
 		return 0;
 
-	/* TAG, Data Latency Control: 2cycle */
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+	int ret;
+	ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
+	if (!ret) {
+		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+		return 0;
+	}
+
+	if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
+		l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
+		/* TAG, Data Latency Control: 2 cycles */
+		l2x0_saved_regs.tag_latency = 0x110;
 
-	if (soc_is_exynos4210())
-		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+		if (soc_is_exynos4212() || soc_is_exynos4412())
+			l2x0_saved_regs.data_latency = 0x120;
+		else
+			l2x0_saved_regs.data_latency = 0x110;
+
+		l2x0_saved_regs.prefetch_ctrl = 0x30000007;
+		l2x0_saved_regs.pwr_ctrl =
+			(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN);
 
-	/* L2X0 Prefetch Control */
-	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+		l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
 
-	/* L2X0 Power Control */
-	__raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
-		     S5P_VA_L2CC + L2X0_POWER_CTRL);
+		__raw_writel(l2x0_saved_regs.tag_latency,
+				S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+		__raw_writel(l2x0_saved_regs.data_latency,
+				S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
-	l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+		/* L2X0 Prefetch Control */
+		__raw_writel(l2x0_saved_regs.prefetch_ctrl,
+				S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+		/* L2X0 Power Control */
+		__raw_writel(l2x0_saved_regs.pwr_ctrl,
+				S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+		clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+		clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
+	}
 
+	l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK);
 	return 0;
 }
 early_initcall(exynos4_l2x0_cache_init);

arch/arm/mach-exynos/cpuidle.c

@@ -11,25 +11,53 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
 #include <linux/io.h>
 #include <linux/export.h>
 #include <linux/time.h>
 
 #include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <asm/unified.h>
+#include <mach/regs-pmu.h>
+#include <mach/pmu.h>
+
+#include <plat/cpu.h>
+
+#define REG_DIRECTGO_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
+#define REG_DIRECTGO_FLAG	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+			S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+			(S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
+
+#define S5P_CHECK_AFTR		0xFCBA0D10
 
 static int exynos4_enter_idle(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			      int index);
+static int exynos4_enter_lowpower(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index);
 
-static struct cpuidle_state exynos4_cpuidle_set[] = {
+static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
 	[0] = {
 		.enter			= exynos4_enter_idle,
 		.exit_latency		= 1,
 		.target_residency	= 100000,
 		.flags			= CPUIDLE_FLAG_TIME_VALID,
-		.name			= "IDLE",
+		.name			= "C0",
 		.desc			= "ARM clock gating(WFI)",
 	},
+	[1] = {
+		.enter			= exynos4_enter_lowpower,
+		.exit_latency		= 300,
+		.target_residency	= 100000,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "C1",
+		.desc			= "ARM power down",
+	},
 };
 
 static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
@@ -39,9 +67,102 @@ static struct cpuidle_driver exynos4_idle_driver = {
 	.owner		= THIS_MODULE,
 };
 
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos4_set_wakeupmask(void)
+{
+	__raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
+}
+
+static unsigned int g_pwr_ctrl, g_diag_reg;
+
+static void save_cpu_arch_register(void)
+{
+	/*read power control register*/
+	asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
+	/*read diagnostic register*/
+	asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
+	return;
+}
+
+static void restore_cpu_arch_register(void)
+{
+	/*write power control register*/
+	asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
+	/*write diagnostic register*/
+	asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
+	return;
+}
+
+static int idle_finisher(unsigned long flags)
+{
+	cpu_do_idle();
+	return 1;
+}
+
+static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	struct timeval before, after;
+	int idle_time;
+	unsigned long tmp;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	exynos4_set_wakeupmask();
+
+	/* Set value of power down register for aftr mode */
+	exynos4_sys_powerdown_conf(SYS_AFTR);
+
+	__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
+	__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
+
+	save_cpu_arch_register();
+
+	/* Setting Central Sequence Register for power down mode */
+	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+	__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+	cpu_pm_enter();
+	cpu_suspend(0, idle_finisher);
+
+#ifdef CONFIG_SMP
+	scu_enable(S5P_VA_SCU);
+#endif
+	cpu_pm_exit();
+
+	restore_cpu_arch_register();
+
+	/*
+	 * If PMU failed while entering sleep mode, WFI will be
+	 * ignored by PMU and then exiting cpu_do_idle().
+	 * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+	 * in this situation.
+	 */
+	tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+		tmp |= S5P_CENTRAL_LOWPWR_CFG;
+		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+	}
+
+	/* Clear wakeup state register */
+	__raw_writel(0x0, S5P_WAKEUP_STAT);
+
+	do_gettimeofday(&after);
+
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+		    (after.tv_usec - before.tv_usec);
+
+	dev->last_residency = idle_time;
+	return index;
+}
+
 static int exynos4_enter_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
-			      int index)
+				int index)
 {
 	struct timeval before, after;
 	int idle_time;
@@ -60,6 +181,22 @@ static int exynos4_enter_idle(struct cpuidle_device *dev,
 	return index;
 }
 
+static int exynos4_enter_lowpower(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv,
+				int index)
+{
+	int new_index = index;
+
+	/* This mode only can be entered when other core's are offline */
+	if (num_online_cpus() > 1)
+		new_index = drv->safe_state_index;
+
+	if (new_index == 0)
+		return exynos4_enter_idle(dev, drv, new_index);
+	else
+		return exynos4_enter_core0_aftr(dev, drv, new_index);
+}
+
 static int __init exynos4_init_cpuidle(void)
 {
 	int i, max_cpuidle_state, cpu_id;
@@ -74,19 +211,25 @@ static int __init exynos4_init_cpuidle(void)
 		memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
 				sizeof(struct cpuidle_state));
 	}
+	drv->safe_state_index = 0;
 	cpuidle_register_driver(&exynos4_idle_driver);
 
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
 		device->cpu = cpu_id;
 
-		device->state_count = drv->state_count;
+		if (cpu_id == 0)
+			device->state_count = (sizeof(exynos4_cpuidle_set) /
+					       sizeof(struct cpuidle_state));
+		else
+			device->state_count = 1;	/* Support IDLE only */
 
 		if (cpuidle_register_device(device)) {
 			printk(KERN_ERR "CPUidle register device failed\n,");
 			return -EIO;
 		}
 	}
+
 	return 0;
 }
 device_initcall(exynos4_init_cpuidle);

arch/arm/mach-exynos/include/mach/map.h

@@ -32,6 +32,10 @@
 #define EXYNOS4_PA_FIMC2		0x11820000
 #define EXYNOS4_PA_FIMC3		0x11830000
 
+#define EXYNOS4_PA_JPEG			0x11840000
+
+#define EXYNOS4_PA_G2D			0x12800000
+
 #define EXYNOS4_PA_I2S0			0x03830000
 #define EXYNOS4_PA_I2S1			0xE3100000
 #define EXYNOS4_PA_I2S2			0xE2A00000
@@ -67,6 +71,7 @@
 #define EXYNOS4_PA_KEYPAD		0x100A0000
 
 #define EXYNOS4_PA_DMC0			0x10400000
+#define EXYNOS4_PA_DMC1			0x10410000
 
 #define EXYNOS4_PA_COMBINER		0x10440000
 #define EXYNOS5_PA_COMBINER		0x10440000
@@ -179,6 +184,8 @@
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
 #define S5P_PA_FIMC2			EXYNOS4_PA_FIMC2
 #define S5P_PA_FIMC3			EXYNOS4_PA_FIMC3
+#define S5P_PA_JPEG			EXYNOS4_PA_JPEG
+#define S5P_PA_G2D			EXYNOS4_PA_G2D
 #define S5P_PA_FIMD0			EXYNOS4_PA_FIMD0
 #define S5P_PA_HDMI			EXYNOS4_PA_HDMI
 #define S5P_PA_IIC_HDMIPHY		EXYNOS4_PA_IIC_HDMIPHY

arch/arm/mach-exynos/include/mach/pmu.h

@@ -22,11 +22,13 @@ enum sys_powerdown {
 	NUM_SYS_POWERDOWN,
 };
 
+extern unsigned long l2x0_regs_phys;
 struct exynos4_pmu_conf {
 	void __iomem *reg;
 	unsigned int val[NUM_SYS_POWERDOWN];
 };
 
 extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
 
 #endif /* __ASM_ARCH_PMU_H */

arch/arm/mach-exynos/mct.c

@@ -29,12 +29,13 @@
 #include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+#define TICK_BASE_CNT	1
+
 enum {
 	MCT_INT_SPI,
 	MCT_INT_PPI
 };
 
-static unsigned long clk_cnt_per_tick;
 static unsigned long clk_rate;
 static unsigned int mct_int_type;
 
@@ -205,11 +206,14 @@ static int exynos4_comp_set_next_event(unsigned long cycles,
 static void exynos4_comp_set_mode(enum clock_event_mode mode,
 				  struct clock_event_device *evt)
 {
+	unsigned long cycles_per_jiffy;
 	exynos4_mct_comp0_stop();
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		exynos4_mct_comp0_start(mode, clk_cnt_per_tick);
+		cycles_per_jiffy =
+			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+		exynos4_mct_comp0_start(mode, cycles_per_jiffy);
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -248,9 +252,7 @@ static struct irqaction mct_comp_event_irq = {
 
 static void exynos4_clockevent_init(void)
 {
-	clk_cnt_per_tick = clk_rate / 2	/ HZ;
-
-	clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5);
+	clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
 	mct_comp_device.max_delta_ns =
 		clockevent_delta2ns(0xffffffff, &mct_comp_device);
 	mct_comp_device.min_delta_ns =
@@ -317,12 +319,15 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
 					 struct clock_event_device *evt)
 {
 	struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+	unsigned long cycles_per_jiffy;
 
 	exynos4_mct_tick_stop(mevt);
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		exynos4_mct_tick_start(clk_cnt_per_tick, mevt);
+		cycles_per_jiffy =
+			(((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+		exynos4_mct_tick_start(cycles_per_jiffy, mevt);
 		break;
 
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -396,7 +401,7 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
 	evt->rating = 450;
 
-	clockevents_calc_mult_shift(evt, clk_rate / 2, 5);
+	clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
 	evt->max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, evt);
 	evt->min_delta_ns =
@@ -404,7 +409,7 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 
 	clockevents_register_device(evt);
 
-	exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET);
+	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
 	if (mct_int_type == MCT_INT_SPI) {
 		if (cpu == 0) {

arch/arm/mach-exynos/pm.c

@@ -155,13 +155,6 @@ static struct sleep_save exynos4_core_save[] = {
 	SAVE_ITEM(S5P_SROM_BC3),
 };
 
-static struct sleep_save exynos4_l2cc_save[] = {
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL),
-	SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
-};
 
 /* For Cortex-A9 Diagnostic and Power control register */
 static unsigned int save_arm_register[2];
@@ -182,7 +175,6 @@ static void exynos4_pm_prepare(void)
 	u32 tmp;
 
 	s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
-	s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
 	s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
 	s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
 
@@ -388,13 +380,6 @@ static void exynos4_pm_resume(void)
 	scu_enable(S5P_VA_SCU);
 #endif
 
-#ifdef CONFIG_CACHE_L2X0
-	s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
-	outer_inv_all();
-	/* enable L2X0*/
-	writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
-#endif
-
 early_wakeup:
 	return;
 }

arch/arm/mach-s3c64xx/Kconfig

@@ -83,6 +83,11 @@ config S3C64XX_SETUP_SPI
 	help
 	 Common setup code for SPI GPIO configurations
 
+config S3C64XX_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 # S36400 Macchine support
 
 config MACH_SMDK6400
@@ -157,6 +162,7 @@ config MACH_SMDK6410
 	select S3C64XX_SETUP_IDE
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_USB_PHY
 	help
 	  Machine support for the Samsung SMDK6410
 
@@ -256,6 +262,7 @@ config MACH_SMARTQ
 	select S3C_DEV_USB_HOST
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_USB_PHY
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
@@ -283,6 +290,7 @@ config MACH_WLF_CRAGG_6410
 	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
 	select S3C64XX_SETUP_SPI
+	select S3C64XX_SETUP_USB_PHY
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_KEYPAD
 	select S3C_DEV_USB_HOST

arch/arm/mach-s3c64xx/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
 # PM
 
 obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
 # DMA support
 
@@ -42,6 +43,7 @@ obj-$(CONFIG_S3C64XX_SETUP_IDE)		+= setup-ide.o
 obj-$(CONFIG_S3C64XX_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S3C64XX_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
 
 # Machine support
 

arch/arm/mach-s3c64xx/clock.c

@@ -206,6 +206,15 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_48m,
 		.enable		= s3c64xx_sclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "ac97",
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}, {
+		.name		= "cfcon",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
 	}, {
 		.name		= "dma0",
 		.parent		= &clk_h,
@@ -216,6 +225,107 @@ static struct clk init_clocks_off[] = {
 		.parent		= &clk_h,
 		.enable		= s3c64xx_hclk_ctrl,
 		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	}, {
+		.name		= "3dse",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_3DSE,
+	}, {
+		.name		= "hclk_secur",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SECUR,
+	}, {
+		.name		= "sdma1",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SDMA1,
+	}, {
+		.name		= "sdma0",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SDMA0,
+	}, {
+		.name		= "hclk_jpeg",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_JPEG,
+	}, {
+		.name		= "camif",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_CAMIF,
+	}, {
+		.name		= "hclk_scaler",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_SCALER,
+	}, {
+		.name		= "2d",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_2D,
+	}, {
+		.name		= "tv",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_TV,
+	}, {
+		.name		= "post0",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_POST0,
+	}, {
+		.name		= "rot",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_ROT,
+	}, {
+		.name		= "hclk_mfc",
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_MFC,
+	}, {
+		.name		= "pclk_mfc",
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_MFC,
+	}, {
+		.name		= "dac27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_DAC27,
+	}, {
+		.name		= "tv27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_TV27,
+	}, {
+		.name		= "scaler27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SCALER27,
+	}, {
+		.name		= "sclk_scaler",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SCALER,
+	}, {
+		.name		= "post0_27",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_POST0_27,
+	}, {
+		.name		= "secur",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SECUR,
+	}, {
+		.name		= "sclk_mfc",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MFC,
+	}, {
+		.name		= "cam",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_CAM,
+	}, {
+		.name		= "sclk_jpeg",
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_JPEG,
 	},
 };
 
@@ -289,16 +399,7 @@ static struct clk init_clocks[] = {
 		.name		= "watchdog",
 		.parent		= &clk_p,
 		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
-	}, {
-		.name		= "cfcon",
-		.parent		= &clk_h,
-		.enable		= s3c64xx_hclk_ctrl,
-		.ctrlbit	= S3C_CLKCON_HCLK_IHOST,
-	}
+	},
 };
 
 static struct clk clk_hsmmc0 = {

arch/arm/mach-s3c64xx/cpuidle.c

+/* linux/arch/arm/mach-s3c64xx/cpuidle.c
+ *
+ * Copyright (c) 2011 Wolfson Microelectronics, plc
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-syscon-power.h>
+
+static int s3c64xx_enter_idle(struct cpuidle_device *dev,
+			      struct cpuidle_driver *drv,
+			      int index)
+{
+	struct timeval before, after;
+	unsigned long tmp;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	/* Setup PWRCFG to enter idle mode */
+	tmp = __raw_readl(S3C64XX_PWR_CFG);
+	tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+	tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
+	__raw_writel(tmp, S3C64XX_PWR_CFG);
+
+	cpu_do_idle();
+
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+		    (after.tv_usec - before.tv_usec);
+
+	dev->last_residency = idle_time;
+	return index;
+}
+
+static struct cpuidle_state s3c64xx_cpuidle_set[] = {
+	[0] = {
+		.enter			= s3c64xx_enter_idle,
+		.exit_latency		= 1,
+		.target_residency	= 1,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "IDLE",
+		.desc			= "System active, ARM gated",
+	},
+};
+
+static struct cpuidle_driver s3c64xx_cpuidle_driver = {
+	.name		= "s3c64xx_cpuidle",
+	.owner		= THIS_MODULE,
+	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
+};
+
+static struct cpuidle_device s3c64xx_cpuidle_device = {
+	.state_count	= ARRAY_SIZE(s3c64xx_cpuidle_set),
+};
+
+static int __init s3c64xx_init_cpuidle(void)
+{
+	int ret;
+
+	memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set,
+	       sizeof(s3c64xx_cpuidle_set));
+	cpuidle_register_driver(&s3c64xx_cpuidle_driver);
+
+	ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
+	if (ret) {
+		pr_err("Failed to register cpuidle device: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+device_initcall(s3c64xx_init_cpuidle);

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -59,6 +59,7 @@
 #include <plat/sdhci.h>
 #include <plat/gpio-cfg.h>
 #include <plat/s3c64xx-spi.h>
+#include <plat/udc-hs.h>
 
 #include <plat/keypad.h>
 #include <plat/clock.h>
@@ -698,6 +699,8 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
 	.cfg_gpio		= crag6410_cfg_sdhci0,
 };
 
+static struct s3c_hsotg_plat crag6410_hsotg_pdata;
+
 static void __init crag6410_machine_init(void)
 {
 	/* Open drain IRQs need pullups */
@@ -722,6 +725,7 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
+	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -187,6 +187,8 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
 	},
 };
 
+static struct s3c_hsotg_plat smartq_hsotg_pdata;
+
 static int __init smartq_lcd_setup_gpio(void)
 {
 	int ret;
@@ -383,6 +385,7 @@ void __init smartq_map_io(void)
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -72,6 +72,7 @@
 #include <plat/keypad.h>
 #include <plat/backlight.h>
 #include <plat/regs-fb-v4.h>
+#include <plat/udc-hs.h>
 
 #include "common.h"
 
@@ -631,6 +632,8 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = {
 	.pwm_id = 1,
 };
 
+static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
+
 static void __init smdk6410_map_io(void)
 {
 	u32 tmp;
@@ -659,6 +662,7 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 

arch/arm/mach-s3c64xx/setup-usb-phy.c

+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s3c_usb_otgphy_init(struct platform_device *pdev)
+{
+	struct clk *xusbxti;
+	u32 phyclk;
+
+	writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+	/* set clock frequency for PLL */
+	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+	xusbxti = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
+	/* TODO: select external clock/oscillator */
+	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+	/* set to normal OTG PHY */
+	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+	mdelay(1);
+
+	/* reset OTG PHY and Link */
+	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+			S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+
+	return 0;
+}
+
+static int s3c_usb_otgphy_exit(struct platform_device *pdev)
+{
+	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+	writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+	return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s3c_usb_otgphy_init(pdev);
+
+	return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s3c_usb_otgphy_exit(pdev);
+
+	return -EINVAL;
+}

arch/arm/mach-s5pv210/Kconfig

@@ -65,6 +65,11 @@ config S5PV210_SETUP_SPI
 	help
 	  Common setup code for SPI GPIO configurations.
 
+config S5PV210_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
 menu "S5PC110 Machines"
 
 config MACH_AQUILA
@@ -107,6 +112,7 @@ config MACH_GONI
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
 	select S5PV210_SETUP_FIMC
+	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210

arch/arm/mach-s5pv210/Makefile

@@ -39,3 +39,4 @@ obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
 obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
 obj-$(CONFIG_S5PV210_SETUP_SPI)		+= setup-spi.o
+obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o

arch/arm/mach-s5pv210/include/mach/regs-sys.h

@@ -13,7 +13,3 @@
 #define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
 #define S5PV210_USB_PHY0_EN	(1 << 0)
 #define S5PV210_USB_PHY1_EN	(1 << 1)
-
-/* compatibility defines for s3c-hsotg driver */
-#define S3C64XX_OTHERS		S5PV210_USB_PHY_CON
-#define S3C64XX_OTHERS_USBMASK	S5PV210_USB_PHY0_EN

arch/arm/mach-s5pv210/setup-usb-phy.c

+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
+{
+	struct clk *xusbxti;
+	u32 phyclk;
+
+	writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN,
+			S5PV210_USB_PHY_CON);
+
+	/* set clock frequency for PLL */
+	phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+	xusbxti = clk_get(&pdev->dev, "xusbxti");
+	if (xusbxti && !IS_ERR(xusbxti)) {
+		switch (clk_get_rate(xusbxti)) {
+		case 12 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_12M;
+			break;
+		case 24 * MHZ:
+			phyclk |= S3C_PHYCLK_CLKSEL_24M;
+			break;
+		default:
+		case 48 * MHZ:
+			/* default reference clock */
+			break;
+		}
+		clk_put(xusbxti);
+	}
+
+	/* TODO: select external clock/oscillator */
+	writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+	/* set to normal OTG PHY */
+	writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+	mdelay(1);
+
+	/* reset OTG PHY and Link */
+	writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+			S3C_RSTCON);
+	udelay(20);	/* at-least 10uS */
+	writel(0, S3C_RSTCON);
+
+	return 0;
+}
+
+static int s5pv210_usb_otgphy_exit(struct platform_device *pdev)
+{
+	writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+				S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+	writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN,
+			S5PV210_USB_PHY_CON);
+
+	return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s5pv210_usb_otgphy_init(pdev);
+
+	return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+	if (type == S5P_USB_PHY_DEVICE)
+		return s5pv210_usb_otgphy_exit(pdev);
+
+	return -EINVAL;
+}

arch/arm/plat-s5p/Kconfig

@@ -84,6 +84,16 @@ config S5P_DEV_FIMC3
 	help
 	  Compile in platform device definitions for FIMC controller 3
 
+config S5P_DEV_JPEG
+	bool
+	help
+	  Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_G2D
+	bool
+	help
+	  Compile in platform device definitions for G2D device
+
 config S5P_DEV_FIMD0
 	bool
 	help

arch/arm/plat-s5p/sleep.S

@@ -23,9 +23,18 @@
 */
 
 #include <linux/linkage.h>
-#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
 
-	.text
+/*
+ *	 The following code is located into the .data section. This is to
+ *	 allow l2x0_regs_phys to be accessed with a relative load while we
+ *	 can't rely on any MMU translation. We could have put l2x0_regs_phys
+ *	 in the .text section as well, but some setups might insist on it to
+ *	 be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+	.data
+	.align
 
 	/*
 	 * sleep magic, to allow the bootloader to check for an valid
@@ -39,11 +48,34 @@
 	 * s3c_cpu_resume
 	 *
 	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
 	 */
 
 ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	adr	r0, l2x0_regs_phys
+	ldr	r0, [r0]
+	ldr	r1, [r0, #L2X0_R_PHY_BASE]
+	ldr	r2, [r1, #L2X0_CTRL]
+	tst	r2, #0x1
+	bne	resume_l2on
+	ldr	r2, [r0, #L2X0_R_AUX_CTRL]
+	str	r2, [r1, #L2X0_AUX_CTRL]
+	ldr	r2, [r0, #L2X0_R_TAG_LATENCY]
+	str	r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_DATA_LATENCY]
+	str	r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+	ldr	r2, [r0, #L2X0_R_PREFETCH_CTRL]
+	str	r2, [r1, #L2X0_PREFETCH_CTRL]
+	ldr	r2, [r0, #L2X0_R_PWR_CTRL]
+	str	r2, [r1, #L2X0_POWER_CTRL]
+	mov	r2, #1
+	str	r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
 	b	cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+	.globl l2x0_regs_phys
+l2x0_regs_phys:
+	.long	0
+#endif

arch/arm/plat-samsung/clock.c

@@ -84,31 +84,35 @@ static int clk_null_enable(struct clk *clk, int enable)
 
 int clk_enable(struct clk *clk)
 {
+	unsigned long flags;
+
 	if (IS_ERR(clk) || clk == NULL)
 		return -EINVAL;
 
 	clk_enable(clk->parent);
 
-	spin_lock(&clocks_lock);
+	spin_lock_irqsave(&clocks_lock, flags);
 
 	if ((clk->usage++) == 0)
 		(clk->enable)(clk, 1);
 
-	spin_unlock(&clocks_lock);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 	return 0;
 }
 
 void clk_disable(struct clk *clk)
 {
+	unsigned long flags;
+
 	if (IS_ERR(clk) || clk == NULL)
 		return;
 
-	spin_lock(&clocks_lock);
+	spin_lock_irqsave(&clocks_lock, flags);
 
 	if ((--clk->usage) == 0)
 		(clk->enable)(clk, 0);
 
-	spin_unlock(&clocks_lock);
+	spin_unlock_irqrestore(&clocks_lock, flags);
 	clk_disable(clk->parent);
 }
 

arch/arm/plat-samsung/dev-backlight.c

@@ -77,7 +77,7 @@ static struct platform_device samsung_dfl_bl_device __initdata = {
  * @gpio_info:	structure containing GPIO info for PWM timer
  * @bl_data:	structure containing Backlight control data
  */
-void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	struct platform_pwm_backlight_data *bl_data)
 {
 	int ret = 0;
@@ -115,6 +115,8 @@ void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 		samsung_bl_data->init = bl_data->init;
 	if (bl_data->notify)
 		samsung_bl_data->notify = bl_data->notify;
+	if (bl_data->notify_after)
+		samsung_bl_data->notify_after = bl_data->notify_after;
 	if (bl_data->exit)
 		samsung_bl_data->exit = bl_data->exit;
 	if (bl_data->check_fb)

arch/arm/plat-samsung/devs.c

@@ -57,6 +57,7 @@
 #include <plat/sdhci.h>
 #include <plat/ts.h>
 #include <plat/udc.h>
+#include <plat/udc-hs.h>
 #include <plat/usb-control.h>
 #include <plat/usb-phy.h>
 #include <plat/regs-iic.h>
@@ -267,6 +268,52 @@ struct platform_device s5p_device_fimc3 = {
 };
 #endif /* CONFIG_S5P_DEV_FIMC3 */
 
+/* G2D */
+
+#ifdef CONFIG_S5P_DEV_G2D
+static struct resource s5p_g2d_resource[] = {
+	[0] = {
+		.start	= S5P_PA_G2D,
+		.end	= S5P_PA_G2D + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_2D,
+		.end	= IRQ_2D,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device s5p_device_g2d = {
+	.name		= "s5p-g2d",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_g2d_resource),
+	.resource	= s5p_g2d_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /* CONFIG_S5P_DEV_G2D */
+
+#ifdef CONFIG_S5P_DEV_JPEG
+static struct resource s5p_jpeg_resource[] = {
+	[0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
+	[1] = DEFINE_RES_IRQ(IRQ_JPEG),
+};
+
+struct platform_device s5p_device_jpeg = {
+	.name		= "s5p-jpeg",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5p_jpeg_resource),
+	.resource	= s5p_jpeg_resource,
+	.dev		= {
+		.dma_mask		= &samsung_device_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+#endif /*  CONFIG_S5P_DEV_JPEG */
+
 /* FIMD0 */
 
 #ifdef CONFIG_S5P_DEV_FIMD0
@@ -758,7 +805,7 @@ struct platform_device s3c_device_cfcon = {
 	.resource	= s3c_cfcon_resource,
 };
 
-void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
 {
 	s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
 			 &s3c_device_cfcon);
@@ -876,7 +923,7 @@ struct platform_device s5p_device_mfc_r = {
 
 #ifdef CONFIG_S5P_DEV_CSIS0
 static struct resource s5p_mipi_csis0_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K),
+	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
 	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
 };
 
@@ -890,7 +937,7 @@ struct platform_device s5p_device_mipi_csis0 = {
 
 #ifdef CONFIG_S5P_DEV_CSIS1
 static struct resource s5p_mipi_csis1_resource[] = {
-	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K),
+	[0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
 	[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
 };
 
@@ -1038,7 +1085,7 @@ struct platform_device s3c64xx_device_onenand1 = {
 	.resource	= s3c64xx_onenand1_resources,
 };
 
-void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
 {
 	s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
 			 &s3c64xx_device_onenand1);
@@ -1412,6 +1459,19 @@ struct platform_device s3c_device_usb_hsotg = {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 };
+
+void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
+{
+	struct s3c_hsotg_plat *npd;
+
+	npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
+			&s3c_device_usb_hsotg);
+
+	if (!npd->phy_init)
+		npd->phy_init = s5p_usb_phy_init;
+	if (!npd->phy_exit)
+		npd->phy_exit = s5p_usb_phy_exit;
+}
 #endif /* CONFIG_S3C_DEV_USB_HSOTG */
 
 /* USB High Spped 2.0 Device (Gadget) */

arch/arm/plat-samsung/include/plat/devs.h

@@ -81,6 +81,8 @@ extern struct platform_device s5p_device_fimc1;
 extern struct platform_device s5p_device_fimc2;
 extern struct platform_device s5p_device_fimc3;
 extern struct platform_device s5p_device_fimc_md;
+extern struct platform_device s5p_device_jpeg;
+extern struct platform_device s5p_device_g2d;
 extern struct platform_device s5p_device_fimd0;
 extern struct platform_device s5p_device_hdmi;
 extern struct platform_device s5p_device_i2c_hdmiphy;

arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h

@@ -25,8 +25,9 @@
 #define S3C_HSOTG_PHYREG(x)	((x) + S3C_VA_USB_HSPHY)
 
 #define S3C_PHYPWR				S3C_HSOTG_PHYREG(0x00)
-#define SRC_PHYPWR_OTG_DISABLE			(1 << 4)
-#define SRC_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
+#define S3C_PHYPWR_NORMAL_MASK			(0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE			(1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN		(1 << 3)
 #define SRC_PHYPWR_FORCE_SUSPEND		(1 << 1)
 
 #define S3C_PHYCLK				S3C_HSOTG_PHYREG(0x04)
@@ -42,7 +43,7 @@
 
 #define S3C_RSTCON				S3C_HSOTG_PHYREG(0x08)
 #define S3C_RSTCON_PHYCLK			(1 << 2)
-#define S3C_RSTCON_HCLK				(1 << 2)
+#define S3C_RSTCON_HCLK				(1 << 1)
 #define S3C_RSTCON_PHY				(1 << 0)
 
 #define S3C_PHYTUNE				S3C_HSOTG_PHYREG(0x20)

arch/arm/plat-samsung/include/plat/udc-hs.h

@@ -26,4 +26,9 @@ enum s3c_hsotg_dmamode {
 struct s3c_hsotg_plat {
 	enum s3c_hsotg_dmamode	dma;
 	unsigned int		is_osc : 1;
+
+	int (*phy_init)(struct platform_device *pdev, int type);
+	int (*phy_exit)(struct platform_device *pdev, int type);
 };
+
+extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);