usb: dwc3: gadget: remove redundant trace prints

Removing some trace prints which were made redundant
when we started decoding events and TRBs completely
within their respective trace points.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

drivers/usb/dwc3/ep0.c

@@ -99,11 +99,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 	trace_dwc3_prepare_trb(dep, trb);
 
 	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
-	if (ret < 0) {
-		dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
-				dep->name);
+	if (ret < 0)
 		return ret;
-	}
 
 	dep->flags |= DWC3_EP_BUSY;
 	dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
@@ -242,11 +239,6 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		goto out;
 	}
 
-	dwc3_trace(trace_dwc3_ep0,
-			"queueing request %p to %s length %d state '%s'",
-			request, dep->name, request->length,
-			dwc3_ep0_state_string(dwc->ep0state));
-
 	ret = __dwc3_gadget_ep0_queue(dep, req);
 
 out:
@@ -940,17 +932,14 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
 
 	switch (dwc->ep0state) {
 	case EP0_SETUP_PHASE:
-		dwc3_trace(trace_dwc3_ep0, "Setup Phase");
 		dwc3_ep0_inspect_setup(dwc, event);
 		break;
 
 	case EP0_DATA_PHASE:
-		dwc3_trace(trace_dwc3_ep0, "Data Phase");
 		dwc3_ep0_complete_data(dwc, event);
 		break;
 
 	case EP0_STATUS_PHASE:
-		dwc3_trace(trace_dwc3_ep0, "Status Phase");
 		dwc3_ep0_complete_status(dwc, event);
 		break;
 	default:
@@ -1065,8 +1054,6 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 {
 	switch (event->status) {
 	case DEPEVT_STATUS_CONTROL_DATA:
-		dwc3_trace(trace_dwc3_ep0, "Control Data");
-
 		/*
 		 * We already have a DATA transfer in the controller's cache,
 		 * if we receive a XferNotReady(DATA) we will ignore it, unless
@@ -1092,8 +1079,6 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 		if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
 			return;
 
-		dwc3_trace(trace_dwc3_ep0, "Control Status");
-
 		dwc->ep0state = EP0_STATUS_PHASE;
 
 		if (dwc->delayed_status) {

drivers/usb/dwc3/gadget.c

@@ -797,10 +797,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 	struct usb_gadget	*gadget = &dwc->gadget;
 	enum usb_device_speed	speed = gadget->speed;
 
-	dwc3_trace(trace_dwc3_gadget, "%s: req %p dma %08llx length %d%s",
-			dep->name, req, (unsigned long long) dma,
-			length, chain ? " chain" : "");
-
 	trb = &dep->trb_pool[dep->trb_enqueue];
 
 	if (!req->trb) {
@@ -2142,9 +2138,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		dep->resource_index = 0;
 
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
-			dwc3_trace(trace_dwc3_gadget,
-					"%s is an Isochronous endpoint",
-					dep->name);
+			dev_err(dwc->dev, "XferComplete for Isochronous endpoint\n");
 			return;
 		}
 
@@ -2157,22 +2151,11 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dwc3_gadget_start_isoc(dwc, dep, event);
 		} else {
-			int active;
 			int ret;
 
-			active = event->status & DEPEVT_STATUS_TRANSFER_ACTIVE;
-
-			dwc3_trace(trace_dwc3_gadget, "%s: reason %s",
-					dep->name, active ? "Transfer Active"
-					: "Transfer Not Active");
-
 			ret = __dwc3_gadget_kick_transfer(dep, 0);
 			if (!ret || ret == -EBUSY)
 				return;
-
-			dwc3_trace(trace_dwc3_gadget,
-					"%s: failed to kick transfers",
-					dep->name);
 		}
 
 		break;
@@ -2182,26 +2165,9 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 					dep->name);
 			return;
 		}
-
-		switch (event->status) {
-		case DEPEVT_STREAMEVT_FOUND:
-			dwc3_trace(trace_dwc3_gadget,
-					"Stream %d found and started",
-					event->parameters);
-
-			break;
-		case DEPEVT_STREAMEVT_NOTFOUND:
-			/* FALLTHROUGH */
-		default:
-			dwc3_trace(trace_dwc3_gadget,
-					"unable to find suitable stream");
-		}
 		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun", dep->name);
-		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
-		dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete");
 		break;
 	}
 }
@@ -2750,16 +2716,9 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		}
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
-		dwc3_trace(trace_dwc3_gadget, "Start of Periodic Frame");
-		break;
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
-		dwc3_trace(trace_dwc3_gadget, "Erratic Error");
-		break;
 	case DWC3_DEVICE_EVENT_CMD_CMPL:
-		dwc3_trace(trace_dwc3_gadget, "Command Complete");
-		break;
 	case DWC3_DEVICE_EVENT_OVERFLOW:
-		dwc3_trace(trace_dwc3_gadget, "Overflow");
 		break;
 	default:
 		dev_WARN(dwc->dev, "UNKNOWN IRQ %d\n", event->type);