ASoC: da7219: Add jack insertion detection polarity

Merge series from David Rau <David.Rau.opensource@dm.renesas.com>:

This patchset adds the support of DA7219 Jack insertion detection
polarity selection.

The first patch replaces the old txt binding with a new schema binding.

The second patch adds `dlg,jack-ins-det-pty` property for Jack
insertion detection polarity selection.

The last patch adds the driver support for this topic.

The series has been verified on the DA7219 development kit.

Documentation/devicetree/bindings/sound/da7219.txt

-Dialog Semiconductor DA7219 Audio Codec bindings
-
-DA7219 is an audio codec with advanced accessory detect features.
-
-======
-
-Required properties:
-- compatible : Should be "dlg,da7219"
-- reg: Specifies the I2C slave address
-
-- interrupts : IRQ line info for DA7219.
-  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
-   further information relating to interrupt properties)
-
-- VDD-supply: VDD power supply for the device
-- VDDMIC-supply: VDDMIC power supply for the device
-- VDDIO-supply: VDDIO power supply for the device
-  (See Documentation/devicetree/bindings/regulator/regulator.txt for further
-   information relating to regulators)
-
-Optional properties:
-- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
-  interrupt is to be used to wake system, otherwise "irq" should be used.
-- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
-
-- #clock-cells :  Should be set to '<1>', two clock sources provided;
-- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
-
-- clocks : phandle and clock specifier for codec MCLK.
-- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-
-- dlg,micbias-lvl : Voltage (mV) for Mic Bias
-	[<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
-- dlg,mic-amp-in-sel : Mic input source type
-	["diff", "se_p", "se_n"]
-
-Deprecated properties:
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
-  (LDO unavailable in production HW so property no longer required).
-
-======
-
-Child node - 'da7219_aad':
-
-Optional properties:
-- dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
-	[<2800>, <2900>]
-- dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
-- dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
-	[<2>, <5>, <10>, <50>, <100>, <200>, <500>]
-- dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
-	[<200>, <500>, <750>, <1000>]
-- dlg,jack-ins-deb : Debounce time for jack insertion (ms)
-	[<5>, <10>, <20>, <50>, <100>, <200>, <500>, <1000>]
-- dlg,jack-det-rate: Jack type detection latency (3/4 pole)
-	["32ms_64ms", "64ms_128ms", "128ms_256ms", "256ms_512ms"]
-- dlg,jack-rem-deb : Debounce time for jack removal (ms)
-	[<1>, <5>, <10>, <20>]
-- dlg,a-d-btn-thr : Impedance threshold between buttons A and D
-	[0x0 - 0xFF]
-- dlg,d-b-btn-thr : Impedance threshold between buttons D and B
-	[0x0 - 0xFF]
-- dlg,b-c-btn-thr : Impedance threshold between buttons B and C
-	[0x0 - 0xFF]
-- dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
-	[0x0 - 0xFF]
-- dlg,btn-avg : Number of 8-bit readings for averaged button measurement
-	[<1>, <2>, <4>, <8>]
-- dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
-	[<1>, <2>, <4>, <8>]
-
-======
-
-Example:
-
-	codec: da7219@1a {
-		compatible = "dlg,da7219";
-		reg = <0x1a>;
-
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
-		VDD-supply = <&reg_audio>;
-		VDDMIC-supply = <&reg_audio>;
-		VDDIO-supply = <&reg_audio>;
-
-		#clock-cells = <1>;
-		clock-output-names = "dai-wclk", "dai-bclk";
-
-		clocks = <&clks 201>;
-		clock-names = "mclk";
-
-		dlg,ldo-lvl = <1200>;
-		dlg,micbias-lvl = <2600>;
-		dlg,mic-amp-in-sel = "diff";
-
-		da7219_aad {
-			dlg,btn-cfg = <50>;
-			dlg,mic-det-thr = <500>;
-			dlg,jack-ins-deb = <20>;
-			dlg,jack-det-rate = "32ms_64ms";
-			dlg,jack-rem-deb = <1>;
-
-			dlg,a-d-btn-thr = <0xa>;
-			dlg,d-b-btn-thr = <0x16>;
-			dlg,b-c-btn-thr = <0x21>;
-			dlg,c-mic-btn-thr = <0x3E>;
-
-			dlg,btn-avg = <4>;
-			dlg,adc-1bit-rpt = <1>;
-		};
-	};

Documentation/devicetree/bindings/sound/dialog,da7219.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7219 Audio Codec
+
+maintainers:
+  - David Rau <David.Rau.opensource@dm.renesas.com>
+
+description:
+  The DA7219 is an ultra low-power audio codec with
+  in-built advanced accessory detection (AAD) for mobile
+  computing and accessory applications, which supports
+  sample rates up to 96 kHz at 24-bit resolution.
+
+properties:
+  compatible:
+    const: dlg,da7219
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  VDD-supply:
+    description:
+      VDD power supply for the device.
+
+  VDDMIC-supply:
+    description:
+      VDDMIC power supply for the device.
+
+  VDDIO-supply:
+    description:
+      VDDIO power supply for the device.
+
+  interrupt-names:
+    description:
+      Should be "wakeup" if interrupt is to be used to wake system,
+      otherwise "irq" should be used.
+    enum:
+      - wakeup
+      - irq
+
+  wakeup-source:
+    type: boolean
+    description:
+      Flag to indicate this device can wake system (suspend/resume).
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    minItems: 2
+    maxItems: 2
+    description:
+      Name given for DAI WCLK and BCLK outputs.
+
+  clocks:
+    maxItems: 1
+    description:
+      phandle and clock specifier for codec MCLK.
+
+  clock-names:
+    const: mclk
+
+  dlg,micbias-lvl:
+    enum: [1600, 1800, 2000, 2200, 2400, 2600]
+    description:
+      Voltage (mV) for Mic Bias.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  dlg,mic-amp-in-sel:
+    enum: ["diff", "se_p", "se_n"]
+    description:
+      Mic input source type.
+
+      diff - Differential.
+
+      se_p - MIC_P.
+      Positive differential analog microphone input.
+
+      se_n - MIC_N.
+      Negative differential analog microphone input.
+    $ref: /schemas/types.yaml#/definitions/string
+
+  da7219_aad:
+    type: object
+    description:
+      Configuration of advanced accessory detection.
+    properties:
+      dlg,micbias-pulse-lvl:
+        enum: [2800, 2900]
+        description:
+          Mic bias higher voltage pulse level (mV).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,micbias-pulse-time:
+        description:
+          Mic bias higher voltage pulse duration (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+
+      dlg,btn-cfg:
+        enum: [2, 5, 10, 50, 100, 200, 500]
+        description:
+          Periodic button press measurements for 4-pole jack (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,mic-det-thr:
+        enum: [200, 500, 750, 1000]
+        description:
+          Impedance threshold for mic detection measurement (Ohms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-deb:
+        enum: [5, 10, 20, 50, 100, 200, 500, 1000]
+        description:
+          Debounce time for jack insertion (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,jack-ins-det-pty:
+        enum: ["low", "high"]
+        description:
+          Polarity for jack insertion detection.
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-det-rate:
+        enum: ["32_64", "64_128", "128_256", "256_512"]
+        description:
+          Jack type (3/4 pole) detection latency (ms).
+        $ref: /schemas/types.yaml#/definitions/string
+
+      dlg,jack-rem-deb:
+        enum: [1, 5, 10, 20]
+        description:
+          Debounce time for jack removal (ms).
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,a-d-btn-thr:
+        description:
+          Impedance threshold between buttons A and D.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,d-b-btn-thr:
+        description:
+          Impedance threshold between buttons D and B.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,b-c-btn-thr:
+        description:
+          Impedance threshold between buttons B and C.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,c-mic-btn-thr:
+        description:
+          Impedance threshold between button C and Mic.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 255
+
+      dlg,btn-avg:
+        enum: [1, 2, 4, 8]
+        description:
+          Number of 8-bit readings for averaged button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      dlg,adc-1bit-rpt:
+        enum: [1, 2, 4, 8]
+        description:
+          Repeat count for 1-bit button measurement.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - VDD-supply
+  - VDDMIC-supply
+  - VDDIO-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      codec: da7219@1a {
+          compatible = "dlg,da7219";
+          reg = <0x1a>;
+
+          interrupt-parent = <&gpio6>;
+          interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+          VDD-supply = <&vdd_reg>;
+          VDDMIC-supply = <&vddmic_reg>;
+          VDDIO-supply = <&vddio_reg>;
+
+          #clock-cells = <1>;
+          clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk";
+
+          clocks = <&clks 201>;
+          clock-names = "mclk";
+
+          dlg,micbias-lvl = <2600>;
+          dlg,mic-amp-in-sel = "diff";
+
+          da7219_aad {
+              dlg,btn-cfg = <50>;
+              dlg,mic-det-thr = <500>;
+              dlg,jack-ins-deb = <20>;
+              dlg,jack-ins-det-pty = "low";
+              dlg,jack-det-rate = "32_64";
+              dlg,jack-rem-deb = <1>;
+
+              dlg,a-d-btn-thr = <0xa>;
+              dlg,d-b-btn-thr = <0x16>;
+              dlg,b-c-btn-thr = <0x21>;
+              dlg,c-mic-btn-thr = <0x3E>;
+
+              dlg,btn-avg = <4>;
+              dlg,adc-1bit-rpt = <1>;
+          };
+      };
+    };

include/sound/da7219-aad.h

@@ -44,6 +44,11 @@ enum da7219_aad_jack_ins_deb {
 	DA7219_AAD_JACK_INS_DEB_1S,
 };
 
+enum da7219_aad_jack_ins_det_pty {
+	DA7219_AAD_JACK_INS_DET_PTY_LOW = 0,
+	DA7219_AAD_JACK_INS_DET_PTY_HIGH,
+};
+
 enum da7219_aad_jack_det_rate {
 	DA7219_AAD_JACK_DET_RATE_32_64MS = 0,
 	DA7219_AAD_JACK_DET_RATE_64_128MS,
@@ -80,6 +85,7 @@ struct da7219_aad_pdata {
 	enum da7219_aad_btn_cfg btn_cfg;
 	enum da7219_aad_mic_det_thr mic_det_thr;
 	enum da7219_aad_jack_ins_deb jack_ins_deb;
+	enum da7219_aad_jack_ins_det_pty jack_ins_det_pty;
 	enum da7219_aad_jack_det_rate jack_det_rate;
 	enum da7219_aad_jack_rem_deb jack_rem_deb;
 

sound/soc/codecs/da7219-aad.c

@@ -571,16 +571,29 @@ static enum da7219_aad_jack_ins_deb
 	}
 }
 
+static enum da7219_aad_jack_ins_det_pty
+	da7219_aad_fw_jack_ins_det_pty(struct device *dev, const char *str)
+{
+	if (!strcmp(str, "low")) {
+		return DA7219_AAD_JACK_INS_DET_PTY_LOW;
+	} else if (!strcmp(str, "high")) {
+		return DA7219_AAD_JACK_INS_DET_PTY_HIGH;
+	} else {
+		dev_warn(dev, "Invalid jack insertion detection polarity");
+		return DA7219_AAD_JACK_INS_DET_PTY_LOW;
+	}
+}
+
 static enum da7219_aad_jack_det_rate
 	da7219_aad_fw_jack_det_rate(struct device *dev, const char *str)
 {
-	if (!strcmp(str, "32ms_64ms")) {
+	if (!strcmp(str, "32_64")) {
 		return DA7219_AAD_JACK_DET_RATE_32_64MS;
-	} else if (!strcmp(str, "64ms_128ms")) {
+	} else if (!strcmp(str, "64_128")) {
 		return DA7219_AAD_JACK_DET_RATE_64_128MS;
-	} else if (!strcmp(str, "128ms_256ms")) {
+	} else if (!strcmp(str, "128_256")) {
 		return DA7219_AAD_JACK_DET_RATE_128_256MS;
-	} else if (!strcmp(str, "256ms_512ms")) {
+	} else if (!strcmp(str, "256_512")) {
 		return DA7219_AAD_JACK_DET_RATE_256_512MS;
 	} else {
 		dev_warn(dev, "Invalid jack detect rate");
@@ -688,6 +701,12 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev)
 	else
 		aad_pdata->jack_ins_deb = DA7219_AAD_JACK_INS_DEB_20MS;
 
+	if (!fwnode_property_read_string(aad_np, "dlg,jack-ins-det-pty", &fw_str))
+		aad_pdata->jack_ins_det_pty =
+			da7219_aad_fw_jack_ins_det_pty(dev, fw_str);
+	else
+		aad_pdata->jack_ins_det_pty = DA7219_AAD_JACK_INS_DET_PTY_LOW;
+
 	if (!fwnode_property_read_string(aad_np, "dlg,jack-det-rate", &fw_str))
 		aad_pdata->jack_det_rate =
 			da7219_aad_fw_jack_det_rate(dev, fw_str);
@@ -849,6 +868,21 @@ static void da7219_aad_handle_pdata(struct snd_soc_component *component)
 			mask |= DA7219_ADC_1_BIT_REPEAT_MASK;
 		}
 		snd_soc_component_update_bits(component, DA7219_ACCDET_CONFIG_7, mask, cfg);
+
+		switch (aad_pdata->jack_ins_det_pty) {
+		case DA7219_AAD_JACK_INS_DET_PTY_LOW:
+			snd_soc_component_write(component, 0xF0, 0x8B);
+			snd_soc_component_write(component, 0x75, 0x80);
+			snd_soc_component_write(component, 0xF0, 0x00);
+			break;
+		case DA7219_AAD_JACK_INS_DET_PTY_HIGH:
+			snd_soc_component_write(component, 0xF0, 0x8B);
+			snd_soc_component_write(component, 0x75, 0x00);
+			snd_soc_component_write(component, 0xF0, 0x00);
+			break;
+		default:
+			break;
+		}
 	}
 }