Skip to content

L
linux
Commit 859b21a0 authored by Paul Gortmaker's avatar Paul Gortmaker Committed by Michael Ellerman
Browse files
Options

powerpc: drop PowerQUICC II Family ADS platform support 

Based on documentation revision dates, this MPC82xx pq2fads system
predates the MPC8272-ADS variant by about a year and only has 1/2
the amount of RAM (32MB) -- largely making it useless with a modern
v6.x kernel from today.

Similar to the MPC8272-ADS the pq2fads also supported other 82xx CPU
variants, had 8MB flash, and like the 8272 ADS platform, was on a fairly
large PCB in order to have space for breakout connectors for all features.

These 82xx platforms are two decades old, and originally made for a
small group of industry related people in order to assist in new OEM
board designs.  Given that, it makes sense to remove support today.
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230224204959.17425-3-paul.gortmaker@windriver.com
parent 33777a4e
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 518 deletions
arch/powerpc/boot/Makefile
View file @ 859b21a0
...@@ -329,7 +329,6 @@ image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b ...@@ -329,7 +329,6 @@ image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b
image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200
# Board ports in arch/powerpc/platform/82xx/Kconfig # Board ports in arch/powerpc/platform/82xx/Kconfig
image-$(CONFIG_PQ2FADS) += cuImage.pq2fads
image-$(CONFIG_EP8248E) += dtbImage.ep8248e image-$(CONFIG_EP8248E) += dtbImage.ep8248e
# Board ports in arch/powerpc/platform/83xx/Kconfig # Board ports in arch/powerpc/platform/83xx/Kconfig
......
arch/powerpc/boot/dts/pq2fads.dts deleted 100644 → 0
View file @ 33777a4e
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
*
* Copyright 2007,2008 Freescale Semiconductor Inc.
*/
/dts-v1/;
/ {
model = "pq2fads";
compatible = "fsl,pq2fads";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
localbus@f0010100 {
compatible = "fsl,mpc8280-localbus",
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xf0010100 0x60>;
ranges = <0x0 0x0 0xff800000 0x800000
0x1 0x0 0xf4500000 0x8000
0x8 0x0 0xf8200000 0x8000>;
flash@0,0 {
compatible = "jedec-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <4>;
device-width = <1>;
};
bcsr@1,0 {
reg = <0x1 0x0 0x20>;
compatible = "fsl,pq2fads-bcsr";
};
PCI_PIC: pic@8,0 {
#interrupt-cells = <1>;
interrupt-controller;
reg = <0x8 0x0 0x8>;
compatible = "fsl,pq2ads-pci-pic";
interrupt-parent = <&PIC>;
interrupts = <24 8>;
};
};
pci0: pci@f0010800 {
device_type = "pci";
reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
clock-frequency = <66000000>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x16 */
0xb000 0x0 0x0 0x1 &PCI_PIC 0
0xb000 0x0 0x0 0x2 &PCI_PIC 1
0xb000 0x0 0x0 0x3 &PCI_PIC 2
0xb000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 0x17 */
0xb800 0x0 0x0 0x1 &PCI_PIC 4
0xb800 0x0 0x0 0x2 &PCI_PIC 5
0xb800 0x0 0x0 0x3 &PCI_PIC 6
0xb800 0x0 0x0 0x4 &PCI_PIC 7
/* IDSEL 0x18 */
0xc000 0x0 0x0 0x1 &PCI_PIC 8
0xc000 0x0 0x0 0x2 &PCI_PIC 9
0xc000 0x0 0x0 0x3 &PCI_PIC 10
0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
interrupt-parent = <&PIC>;
interrupts = <18 8>;
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
};
soc@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8280", "fsl,pq2-soc";
ranges = <0x0 0xf0000000 0x53000>;
// Temporary -- will go away once kernel uses ranges for get_immrbase().
reg = <0xf0000000 0x53000>;
cpm@119c0 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
reg = <0x119c0 0x30>;
ranges;
muram@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x2000 0x9800 0x800>;
};
};
brg@119f0 {
compatible = "fsl,mpc8280-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x119f0 0x10 0x115f0 0x10>;
};
serial0: serial@11a00 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a00 0x20 0x8000 0x100>;
interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x800000>;
};
serial1: serial@11a20 {
device_type = "serial";
compatible = "fsl,mpc8280-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a20 0x20 0x8100 0x100>;
interrupts = <41 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <0x4a00000>;
};
enet0: ethernet@11320 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
fsl,cpm-command = <0x16200300>;
};
enet1: ethernet@11340 {
device_type = "network";
compatible = "fsl,mpc8280-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
interrupts = <34 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
fsl,cpm-command = <0x1a400300>;
local-mac-address = [00 e0 0c 00 79 01];
};
mdio@10d40 {
compatible = "fsl,pq2fads-mdio-bitbang",
"fsl,mpc8280-mdio-bitbang",
"fsl,cpm2-mdio-bitbang";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x10d40 0x14>;
fsl,mdio-pin = <9>;
fsl,mdc-pin = <10>;
PHY0: ethernet-phy@0 {
interrupt-parent = <&PIC>;
interrupts = <25 2>;
reg = <0x0>;
};
PHY1: ethernet-phy@1 {
interrupt-parent = <&PIC>;
interrupts = <25 2>;
reg = <0x3>;
};
};
usb@11b60 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc8280-usb",
"fsl,cpm2-usb";
reg = <0x11b60 0x18 0x8b00 0x100>;
interrupt-parent = <&PIC>;
interrupts = <11 8>;
fsl,cpm-command = <0x2e600000>;
};
};
PIC: interrupt-controller@10c00 {
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10c00 0x80>;
compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
};
};
chosen {
stdout-path = "/soc/cpm/serial@11a00";
};
};
arch/powerpc/configs/ppc6xx_defconfig
View file @ 859b21a0
...@@ -38,7 +38,6 @@ CONFIG_PPC_MPC52xx=y ...@@ -38,7 +38,6 @@ CONFIG_PPC_MPC52xx=y
CONFIG_PPC_EFIKA=y CONFIG_PPC_EFIKA=y
CONFIG_PPC_MPC5200_BUGFIX=y CONFIG_PPC_MPC5200_BUGFIX=y
CONFIG_PPC_82xx=y CONFIG_PPC_82xx=y
CONFIG_PQ2FADS=y
CONFIG_EP8248E=y CONFIG_EP8248E=y
CONFIG_MGCOGE=y CONFIG_MGCOGE=y
CONFIG_PPC_83xx=y CONFIG_PPC_83xx=y
......
arch/powerpc/configs/pq2fads_defconfig deleted 100644 → 0
View file @ 33777a4e
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
CONFIG_PQ2FADS=y
CONFIG_BINFMT_MISC=y
CONFIG_PCI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_NETFILTER=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_GEOMETRY=y
# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
# CONFIG_MTD_CFI_I1 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_I4=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_DAVICOM_PHY=y
CONFIG_PPP=y
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_INPUT_EVDEV=y
# CONFIG_VT is not set
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_HWMON is not set
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=y
CONFIG_EXT2_FS=y
CONFIG_EXT4_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_DES=y
arch/powerpc/platforms/82xx/Kconfig
View file @ 859b21a0
...@@ -5,16 +5,6 @@ menuconfig PPC_82xx ...@@ -5,16 +5,6 @@ menuconfig PPC_82xx
if PPC_82xx if PPC_82xx
config PQ2FADS
bool "Freescale PQ2FADS"
select DEFAULT_UIMAGE
select PQ2ADS
select 8260
select FSL_SOC
select PQ2_ADS_PCI_PIC if PCI
help
This option enables support for the PQ2FADS board
config EP8248E config EP8248E
bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)" bool "Embedded Planet EP8248E (a.k.a. CWH-PPC-8248N-VE)"
select 8272 select 8272
......
arch/powerpc/platforms/82xx/Makefile
View file @ 859b21a0
...@@ -4,6 +4,5 @@ ...@@ -4,6 +4,5 @@
# #
obj-$(CONFIG_CPM2) += pq2.o obj-$(CONFIG_CPM2) += pq2.o
obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o obj-$(CONFIG_PQ2_ADS_PCI_PIC) += pq2ads-pci-pic.o
obj-$(CONFIG_PQ2FADS) += pq2fads.o
obj-$(CONFIG_EP8248E) += ep8248e.o obj-$(CONFIG_EP8248E) += ep8248e.o
obj-$(CONFIG_MGCOGE) += km82xx.o obj-$(CONFIG_MGCOGE) += km82xx.o
arch/powerpc/platforms/82xx/pq2fads.c deleted 100644 → 0
View file @ 33777a4e
// SPDX-License-Identifier: GPL-2.0-only
/*
* PQ2FADS board support
*
* Copyright 2007 Freescale Semiconductor, Inc.
* Author: Scott Wood <scottwood@freescale.com>
*
* Loosely based on mp82xx ADS support by Vitaly Bordug <vbordug@ru.mvista.com>
* Copyright (c) 2006 MontaVista Software, Inc.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/fsl_devices.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <asm/io.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
#include "pq2ads.h"
#include "pq2.h"
static void __init pq2fads_pic_init(void)
{
struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
if (!np) {
printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
return;
}
cpm2_pic_init(np);
of_node_put(np);
/* Initialize stuff for the 82xx CPLD IC and install demux */
pq2ads_pci_init_irq();
}
struct cpm_pin {
int port, pin, flags;
};
static struct cpm_pin pq2fads_pins[] = {
/* SCC1 */
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* SCC2 */
{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC2 */
{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC3 */
{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
};
static void __init init_ioports(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(pq2fads_pins); i++) {
struct cpm_pin *pin = &pq2fads_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
}
static void __init pq2fads_setup_arch(void)
{
struct device_node *np;
__be32 __iomem *bcsr;
if (ppc_md.progress)
ppc_md.progress("pq2fads_setup_arch()", 0);
cpm2_reset();
np = of_find_compatible_node(NULL, NULL, "fsl,pq2fads-bcsr");
if (!np) {
printk(KERN_ERR "No fsl,pq2fads-bcsr in device tree\n");
return;
}
bcsr = of_iomap(np, 0);
of_node_put(np);
if (!bcsr) {
printk(KERN_ERR "Cannot map BCSR registers\n");
return;
}
/* Enable the serial and ethernet ports */
clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
setbits32(&bcsr[1], BCSR1_FETH_RST);
clrbits32(&bcsr[3], BCSR3_FETHIEN2);
setbits32(&bcsr[3], BCSR3_FETH2_RST);
iounmap(bcsr);
init_ioports();
/* Enable external IRQs */
clrbits32(&cpm2_immr->im_siu_conf.siu_82xx.sc_siumcr, 0x0c000000);
if (ppc_md.progress)
ppc_md.progress("pq2fads_setup_arch(), finish", 0);
}
static const struct of_device_id of_bus_ids[] __initconst = {
{ .name = "soc", },
{ .name = "cpm", },
{ .name = "localbus", },
{},
};
static int __init declare_of_platform_devices(void)
{
/* Publish the QE devices */
of_platform_bus_probe(NULL, of_bus_ids, NULL);
return 0;
}
machine_device_initcall(pq2fads, declare_of_platform_devices);
define_machine(pq2fads)
{
.name = "Freescale PQ2FADS",
.compatible = "fsl,pq2fads",
.setup_arch = pq2fads_setup_arch,
.discover_phbs = pq2_init_pci,
.init_IRQ = pq2fads_pic_init,
.get_irq = cpm2_get_irq,
.restart = pq2_restart,
.progress = udbg_progress,
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7