Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED subsystem changes from Bryan Wu:
 "LED subsystem updates for 3.13 are basically cleanup and also add a
  new driver for PCA9685"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp55xx: handle enable pin in driver
  leds-gpio: of: led should not be created if its status is disabled
  of: introduce of_get_available_child_count
  leds: Added driver for the NXP PCA9685 I2C chip
  leds: pwm: Remove redundant of_match_ptr
  leds: Include linux/of.h header
  leds: dac124s085: Remove redundant spi_set_drvdata
  leds: lp55xx: enable setting default trigger
  leds: blinkm: Remove redundant break

Documentation/devicetree/bindings/leds/leds-lp55xx.txt

@@ -10,6 +10,7 @@ Each child has own specific current settings
 - max-cur: Maximun current at each led channel.
 
 Optional properties:
+- enable-gpio: GPIO attached to the chip's enable pin
 - label: Used for naming LEDs
 - pwr-sel: LP8501 specific property. Power selection for output channels.
          0: D1~9 are connected to VDD
@@ -17,12 +18,15 @@ Optional properties:
          2: D1~6 with VOUT, D7~9 with VDD
          3: D1~9 are connected to VOUT
 
-Alternatively, each child can have specific channel name
-- chan-name: Name of each channel name
+Alternatively, each child can have a specific channel name and trigger:
+- chan-name (optional): name of channel
+- linux,default-trigger (optional): see
+  Documentation/devicetree/bindings/leds/common.txt
 
 example 1) LP5521
 3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0',
-'lp5521_pri:channel1' and 'lp5521_pri:channel2'
+'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
+on channel 0.
 
 lp5521@32 {
 	compatible = "national,lp5521";
@@ -33,6 +37,7 @@ lp5521@32 {
 	chan0 {
 		led-cur = /bits/ 8 <0x2f>;
 		max-cur = /bits/ 8 <0x5f>;
+		linux,default-trigger = "heartbeat";
 	};
 
 	chan1 {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -213,29 +213,11 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = {
 	}
 };
 
-static int rx51_lp5523_setup(void)
-{
-	return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
-			"lp5523_enable");
-}
-
-static void rx51_lp5523_release(void)
-{
-	gpio_free(RX51_LP5523_CHIP_EN_GPIO);
-}
-
-static void rx51_lp5523_enable(bool state)
-{
-	gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
-}
-
 static struct lp55xx_platform_data rx51_lp5523_platform_data = {
 	.led_config		= rx51_lp5523_led_config,
 	.num_channels		= ARRAY_SIZE(rx51_lp5523_led_config),
 	.clock_mode		= LP55XX_CLOCK_AUTO,
-	.setup_resources	= rx51_lp5523_setup,
-	.release_resources	= rx51_lp5523_release,
-	.enable			= rx51_lp5523_enable,
+	.enable_gpio		= RX51_LP5523_CHIP_EN_GPIO,
 };
 #endif
 

drivers/leds/Kconfig

@@ -300,6 +300,16 @@ config LEDS_PCA963X
 	  LED driver chip accessed via the I2C bus. Supported
 	  devices include PCA9633 and PCA9634
 
+config LEDS_PCA9685
+	tristate "LED support for PCA9685 I2C chip"
+	depends on LEDS_CLASS
+	depends on I2C
+	help
+	  This option enables support for LEDs connected to the PCA9685
+	  LED driver chip accessed via the I2C bus.
+	  The PCA9685 offers 12-bit PWM (4095 levels of brightness) on
+	  16 individual channels.
+
 config LEDS_WM831X_STATUS
 	tristate "LED support for status LEDs on WM831x PMICs"
 	depends on LEDS_CLASS

drivers/leds/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_LEDS_OT200)		+= leds-ot200.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 obj-$(CONFIG_LEDS_PCA963X)		+= leds-pca963x.o
+obj-$(CONFIG_LEDS_PCA9685)		+= leds-pca9685.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
 obj-$(CONFIG_LEDS_DA9052)		+= leds-da9052.o
 obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o

drivers/leds/leds-blinkm.c

@@ -161,13 +161,10 @@ static ssize_t show_color_common(struct device *dev, char *buf, int color)
 	switch (color) {
 	case RED:
 		return scnprintf(buf, PAGE_SIZE, "%02X\n", data->red);
-		break;
 	case GREEN:
 		return scnprintf(buf, PAGE_SIZE, "%02X\n", data->green);
-		break;
 	case BLUE:
 		return scnprintf(buf, PAGE_SIZE, "%02X\n", data->blue);
-		break;
 	default:
 		return -EINVAL;
 	}

drivers/leds/leds-dac124s085.c

@@ -101,7 +101,6 @@ static int dac124s085_probe(struct spi_device *spi)
 	while (i--)
 		led_classdev_unregister(&dac->leds[i].ldev);
 
-	spi_set_drvdata(spi, NULL);
 	return ret;
 }
 
@@ -115,8 +114,6 @@ static int dac124s085_remove(struct spi_device *spi)
 		cancel_work_sync(&dac->leds[i].work);
 	}
 
-	spi_set_drvdata(spi, NULL);
-
 	return 0;
 }
 

drivers/leds/leds-gpio.c

@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/slab.h>
@@ -170,11 +171,11 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
 	int count, ret;
 
 	/* count LEDs in this device, so we know how much to allocate */
-	count = of_get_child_count(np);
+	count = of_get_available_child_count(np);
 	if (!count)
 		return ERR_PTR(-ENODEV);
 
-	for_each_child_of_node(np, child)
+	for_each_available_child_of_node(np, child)
 		if (of_get_gpio(child, 0) == -EPROBE_DEFER)
 			return ERR_PTR(-EPROBE_DEFER);
 
@@ -183,7 +184,7 @@ static struct gpio_leds_priv *gpio_leds_create_of(struct platform_device *pdev)
 	if (!priv)
 		return ERR_PTR(-ENOMEM);
 
-	for_each_child_of_node(np, child) {
+	for_each_available_child_of_node(np, child) {
 		struct gpio_led led = {};
 		enum of_gpio_flags flags;
 		const char *state;

drivers/leds/leds-lp5523.c

@@ -29,6 +29,7 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
 

drivers/leds/leds-lp5562.c

@@ -17,6 +17,7 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
 

drivers/leds/leds-lp55xx-common.c

@@ -20,6 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
 
 #include "leds-lp55xx-common.h"
 
@@ -165,6 +167,7 @@ static int lp55xx_init_led(struct lp55xx_led *led,
 	led->led_current = pdata->led_config[chan].led_current;
 	led->max_current = pdata->led_config[chan].max_current;
 	led->chan_nr = pdata->led_config[chan].chan_nr;
+	led->cdev.default_trigger = pdata->led_config[chan].default_trigger;
 
 	if (led->chan_nr >= max_channel) {
 		dev_err(dev, "Use channel numbers between 0 and %d\n",
@@ -406,18 +409,18 @@ int lp55xx_init_device(struct lp55xx_chip *chip)
 	if (!pdata || !cfg)
 		return -EINVAL;
 
-	if (pdata->setup_resources) {
-		ret = pdata->setup_resources();
+	if (gpio_is_valid(pdata->enable_gpio)) {
+		ret = devm_gpio_request_one(dev, pdata->enable_gpio,
+					    GPIOF_DIR_OUT, "lp5523_enable");
 		if (ret < 0) {
-			dev_err(dev, "setup resoure err: %d\n", ret);
+			dev_err(dev, "could not acquire enable gpio (err=%d)\n",
+				ret);
 			goto err;
 		}
-	}
 
-	if (pdata->enable) {
-		pdata->enable(0);
+		gpio_set_value(pdata->enable_gpio, 0);
 		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
-		pdata->enable(1);
+		gpio_set_value(pdata->enable_gpio, 1);
 		usleep_range(1000, 2000); /* 500us abs min. */
 	}
 
@@ -458,11 +461,8 @@ void lp55xx_deinit_device(struct lp55xx_chip *chip)
 	if (chip->clk)
 		clk_disable_unprepare(chip->clk);
 
-	if (pdata->enable)
-		pdata->enable(0);
-
-	if (pdata->release_resources)
-		pdata->release_resources();
+	if (gpio_is_valid(pdata->enable_gpio))
+		gpio_set_value(pdata->enable_gpio, 0);
 }
 EXPORT_SYMBOL_GPL(lp55xx_deinit_device);
 
@@ -586,6 +586,8 @@ int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
 		of_property_read_string(child, "chan-name", &cfg[i].name);
 		of_property_read_u8(child, "led-cur", &cfg[i].led_current);
 		of_property_read_u8(child, "max-cur", &cfg[i].max_current);
+		cfg[i].default_trigger =
+			of_get_property(child, "linux,default-trigger", NULL);
 
 		i++;
 	}
@@ -593,6 +595,8 @@ int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
 	of_property_read_string(np, "label", &pdata->label);
 	of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
 
+	pdata->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
+
 	/* LP8501 specific */
 	of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
 

drivers/leds/leds-lp8501.c

@@ -18,6 +18,7 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/slab.h>
 

drivers/leds/leds-ns2.c

@@ -30,6 +30,7 @@
 #include <linux/leds.h>
 #include <linux/module.h>
 #include <linux/platform_data/leds-kirkwood-ns2.h>
+#include <linux/of.h>
 #include <linux/of_gpio.h>
 
 /*

drivers/leds/leds-pca9685.c

+/*
+ * Copyright 2013 Maximilian Güntner <maximilian.guentner@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Based on leds-pca963x.c driver by
+ * Peter Meerwald <p.meerwald@bct-electronic.com>
+ *
+ * Driver for the NXP PCA9685 12-Bit PWM LED driver chip.
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/workqueue.h>
+
+#include <linux/platform_data/leds-pca9685.h>
+
+/* Register Addresses */
+#define PCA9685_MODE1 0x00
+#define PCA9685_MODE2 0x01
+#define PCA9685_LED0_ON_L 0x06
+#define PCA9685_ALL_LED_ON_L 0xFA
+
+/* MODE1 Register */
+#define PCA9685_ALLCALL 0x00
+#define PCA9685_SLEEP   0x04
+#define PCA9685_AI      0x05
+
+/* MODE2 Register */
+#define PCA9685_INVRT   0x04
+#define PCA9685_OUTDRV  0x02
+
+static const struct i2c_device_id pca9685_id[] = {
+	{ "pca9685", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca9685_id);
+
+struct pca9685_led {
+	struct i2c_client *client;
+	struct work_struct work;
+	u16 brightness;
+	struct led_classdev led_cdev;
+	int led_num; /* 0-15 */
+	char name[32];
+};
+
+static void pca9685_write_msg(struct i2c_client *client, u8 *buf, u8 len)
+{
+	struct i2c_msg msg = {
+		.addr = client->addr,
+		.flags = 0x00,
+		.len = len,
+		.buf = buf
+	};
+	i2c_transfer(client->adapter, &msg, 1);
+}
+
+static void pca9685_all_off(struct i2c_client *client)
+{
+	u8 i2c_buffer[5] = {PCA9685_ALL_LED_ON_L, 0x00, 0x00, 0x00, 0x10};
+	pca9685_write_msg(client, i2c_buffer, 5);
+}
+
+static void pca9685_led_work(struct work_struct *work)
+{
+	struct pca9685_led *pca9685;
+	u8 i2c_buffer[5];
+
+	pca9685 = container_of(work, struct pca9685_led, work);
+	i2c_buffer[0] = PCA9685_LED0_ON_L + 4 * pca9685->led_num;
+	/*
+	 * 4095 is the maximum brightness, so we set the ON time to 0x1000
+	 * which disables the PWM generator for that LED
+	 */
+	if (pca9685->brightness == 4095)
+		*((__le16 *)(i2c_buffer+1)) = cpu_to_le16(0x1000);
+	else
+		*((__le16 *)(i2c_buffer+1)) = 0x0000;
+
+	if (pca9685->brightness == 0)
+		*((__le16 *)(i2c_buffer+3)) = cpu_to_le16(0x1000);
+	else if (pca9685->brightness == 4095)
+		*((__le16 *)(i2c_buffer+3)) = 0x0000;
+	else
+		*((__le16 *)(i2c_buffer+3)) = cpu_to_le16(pca9685->brightness);
+
+	pca9685_write_msg(pca9685->client, i2c_buffer, 5);
+}
+
+static void pca9685_led_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	struct pca9685_led *pca9685;
+	pca9685 = container_of(led_cdev, struct pca9685_led, led_cdev);
+	pca9685->brightness = value;
+
+	schedule_work(&pca9685->work);
+}
+
+static int pca9685_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct pca9685_led *pca9685;
+	struct pca9685_platform_data *pdata;
+	int err;
+	u8 i;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (pdata) {
+		if (pdata->leds.num_leds < 1 || pdata->leds.num_leds > 15) {
+			dev_err(&client->dev, "board info must claim 1-16 LEDs");
+			return -EINVAL;
+		}
+	}
+
+	pca9685 = devm_kzalloc(&client->dev, 16 * sizeof(*pca9685), GFP_KERNEL);
+	if (!pca9685)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, pca9685);
+	pca9685_all_off(client);
+
+	for (i = 0; i < 16; i++) {
+		pca9685[i].client = client;
+		pca9685[i].led_num = i;
+		pca9685[i].name[0] = '\0';
+		if (pdata && i < pdata->leds.num_leds) {
+			if (pdata->leds.leds[i].name)
+				strncpy(pca9685[i].name,
+					pdata->leds.leds[i].name,
+					sizeof(pca9685[i].name)-1);
+			if (pdata->leds.leds[i].default_trigger)
+				pca9685[i].led_cdev.default_trigger =
+					pdata->leds.leds[i].default_trigger;
+		}
+		if (strlen(pca9685[i].name) == 0) {
+			/*
+			 * Write adapter and address to the name as well.
+			 * Otherwise multiple chips attached to one host would
+			 * not work.
+			 */
+			snprintf(pca9685[i].name, sizeof(pca9685[i].name),
+					"pca9685:%d:x%.2x:%d",
+					client->adapter->nr, client->addr, i);
+		}
+		pca9685[i].led_cdev.name = pca9685[i].name;
+		pca9685[i].led_cdev.max_brightness = 0xfff;
+		pca9685[i].led_cdev.brightness_set = pca9685_led_set;
+
+		INIT_WORK(&pca9685[i].work, pca9685_led_work);
+		err = led_classdev_register(&client->dev, &pca9685[i].led_cdev);
+		if (err < 0)
+			goto exit;
+	}
+
+	if (pdata)
+		i2c_smbus_write_byte_data(client, PCA9685_MODE2,
+			pdata->outdrv << PCA9685_OUTDRV |
+			pdata->inverted << PCA9685_INVRT);
+	else
+		i2c_smbus_write_byte_data(client, PCA9685_MODE2,
+			PCA9685_TOTEM_POLE << PCA9685_OUTDRV);
+	/* Enable Auto-Increment, enable oscillator, ALLCALL/SUBADDR disabled */
+	i2c_smbus_write_byte_data(client, PCA9685_MODE1, BIT(PCA9685_AI));
+
+	return 0;
+
+exit:
+	while (i--) {
+		led_classdev_unregister(&pca9685[i].led_cdev);
+		cancel_work_sync(&pca9685[i].work);
+	}
+	return err;
+}
+
+static int pca9685_remove(struct i2c_client *client)
+{
+	struct pca9685_led *pca9685 = i2c_get_clientdata(client);
+	u8 i;
+
+	for (i = 0; i < 16; i++) {
+		led_classdev_unregister(&pca9685[i].led_cdev);
+		cancel_work_sync(&pca9685[i].work);
+	}
+	pca9685_all_off(client);
+	return 0;
+}
+
+static struct i2c_driver pca9685_driver = {
+	.driver = {
+		.name = "leds-pca9685",
+		.owner = THIS_MODULE,
+	},
+	.probe = pca9685_probe,
+	.remove = pca9685_remove,
+	.id_table = pca9685_id,
+};
+
+module_i2c_driver(pca9685_driver);
+
+MODULE_AUTHOR("Maximilian Güntner <maximilian.guentner@gmail.com>");
+MODULE_DESCRIPTION("PCA9685 LED Driver");
+MODULE_LICENSE("GPL v2");

drivers/leds/leds-pwm.c

@@ -232,7 +232,7 @@ static struct platform_driver led_pwm_driver = {
 	.driver		= {
 		.name	= "leds_pwm",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(of_pwm_leds_match),
+		.of_match_table = of_pwm_leds_match,
 	},
 };
 

include/linux/of.h

@@ -226,6 +226,17 @@ static inline int of_get_child_count(const struct device_node *np)
 	return num;
 }
 
+static inline int of_get_available_child_count(const struct device_node *np)
+{
+	struct device_node *child;
+	int num = 0;
+
+	for_each_available_child_of_node(np, child)
+		num++;
+
+	return num;
+}
+
 /* cache lookup */
 extern struct device_node *of_find_next_cache_node(const struct device_node *);
 extern struct device_node *of_find_node_with_property(
@@ -378,6 +389,11 @@ static inline int of_get_child_count(const struct device_node *np)
 	return 0;
 }
 
+static inline int of_get_available_child_count(const struct device_node *np)
+{
+	return 0;
+}
+
 static inline int of_device_is_compatible(const struct device_node *device,
 					  const char *name)
 {

include/linux/platform_data/leds-lp55xx.h

@@ -22,6 +22,7 @@
 
 struct lp55xx_led_config {
 	const char *name;
+	const char *default_trigger;
 	u8 chan_nr;
 	u8 led_current; /* mA x10, 0 if led is not connected */
 	u8 max_current;
@@ -66,10 +67,8 @@ struct lp55xx_platform_data {
 	/* Clock configuration */
 	u8 clock_mode;
 
-	/* Platform specific functions */
-	int (*setup_resources)(void);
-	void (*release_resources)(void);
-	void (*enable)(bool state);
+	/* optional enable GPIO */
+	int enable_gpio;
 
 	/* Predefined pattern data */
 	struct lp55xx_predef_pattern *patterns;

include/linux/platform_data/leds-pca9685.h

+/*
+ * Copyright 2013 Maximilian Güntner <maximilian.guentner@gmail.com>
+ *
+ * This file is subject to the terms and conditions of version 2 of
+ * the GNU General Public License.  See the file COPYING in the main
+ * directory of this archive for more details.
+ *
+ * Based on leds-pca963x.h by Peter Meerwald <p.meerwald@bct-electronic.com>
+ *
+ * LED driver for the NXP PCA9685 PWM chip
+ *
+ */
+
+#ifndef __LINUX_PCA9685_H
+#define __LINUX_PCA9685_H
+
+#include <linux/leds.h>
+
+enum pca9685_outdrv {
+	PCA9685_OPEN_DRAIN,
+	PCA9685_TOTEM_POLE,
+};
+
+enum pca9685_inverted {
+	PCA9685_NOT_INVERTED,
+	PCA9685_INVERTED,
+};
+
+struct pca9685_platform_data {
+	struct led_platform_data leds;
+	enum pca9685_outdrv outdrv;
+	enum pca9685_inverted inverted;
+};
+
+#endif /* __LINUX_PCA9685_H */