Commit 85d77047 authored by Wolfram Sang's avatar Wolfram Sang Committed by Linus Torvalds

drivers/rtc/rtc-m41t80.c: propagate error value from smbus functions

Don't replace the value we got from the I2C layer, just pass it on.
Signed-off-by: default avatarWolfram Sang <wsa@sang-engineering.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent c67fedfa
......@@ -230,7 +230,7 @@ static ssize_t m41t80_sysfs_show_flags(struct device *dev,
val = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS);
if (val < 0)
return -EIO;
return val;
return sprintf(buf, "%#x\n", val);
}
static DEVICE_ATTR(flags, S_IRUGO, m41t80_sysfs_show_flags, NULL);
......@@ -250,7 +250,7 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev,
reg_sqw = M41T80_REG_WDAY;
val = i2c_smbus_read_byte_data(client, reg_sqw);
if (val < 0)
return -EIO;
return val;
val = (val >> 4) & 0xf;
switch (val) {
case 0:
......@@ -269,7 +269,7 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
int almon, sqw, reg_sqw;
int almon, sqw, reg_sqw, rc;
int val = simple_strtoul(buf, NULL, 0);
if (!(clientdata->features & M41T80_FEATURE_SQ))
......@@ -289,21 +289,30 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
/* disable SQW, set SQW frequency & re-enable */
almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (almon < 0)
return -EIO;
return almon;
reg_sqw = M41T80_REG_SQW;
if (clientdata->features & M41T80_FEATURE_SQ_ALT)
reg_sqw = M41T80_REG_WDAY;
sqw = i2c_smbus_read_byte_data(client, reg_sqw);
if (sqw < 0)
return -EIO;
return sqw;
sqw = (sqw & 0x0f) | (val << 4);
if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon & ~M41T80_ALMON_SQWE) < 0 ||
i2c_smbus_write_byte_data(client, reg_sqw, sqw) < 0)
return -EIO;
if (val && i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon | M41T80_ALMON_SQWE) < 0)
return -EIO;
rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon & ~M41T80_ALMON_SQWE);
if (rc < 0)
return rc;
if (val) {
rc = i2c_smbus_write_byte_data(client, reg_sqw, sqw);
if (rc < 0)
return rc;
rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon | M41T80_ALMON_SQWE);
if (rc <0)
return rc;
}
return count;
}
static DEVICE_ATTR(sqwfreq, S_IRUGO | S_IWUSR,
......@@ -665,7 +674,7 @@ static int m41t80_probe(struct i2c_client *client,
if (rc < 0) {
dev_err(&client->dev, "Can't clear HT bit\n");
return -EIO;
return rc;
}
/* Make sure ST (stop) bit is cleared */
......@@ -676,7 +685,7 @@ static int m41t80_probe(struct i2c_client *client,
rc & ~M41T80_SEC_ST);
if (rc < 0) {
dev_err(&client->dev, "Can't clear ST bit\n");
return -EIO;
return rc;
}
rc = m41t80_sysfs_register(&client->dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment