Merge tag 'mvebu-dt-4.3-3' of git://git.infradead.org/linux-mvebu into next/dt

mvebu dt changes for v4.3 (part #3)

- device tree part of the Dove PMU series
- converting a new orion5x based platform to dt: Linkstation Mini

* tag 'mvebu-dt-4.3-3' of git://git.infradead.org/linux-mvebu:
  ARM: dts: Convert Linkstation Mini to Device Tree
  ARM: dt: dove: add GPU power domain description
  ARM: dt: dove: add video decoder power domain description
  ARM: dt: dove: wire up RTC interrupt
  ARM: dt: Add PMU node, making PMU child devices childs of this node
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -478,6 +478,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
 	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
 	orion5x-linkstation-lswtgl.dtb \
+	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
 	orion5x-rd88f5182-nas.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += \

arch/arm/boot/dts/orion5x-lswsgl.dts

+/*
+ * Copyright (C) 2015 Benjamin Cama <benoar@dolka.fr>
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Based on the board file arch/arm/mach-orion5x/lsmini-setup.c,
+ * Copyright (C) 2008 Alexey Kopytko <alexey@kopytko.ru>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+	model = "Buffalo Linkstation Mini (LS-WSGL)";
+	compatible = "buffalo,lswsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+	memory {
+		reg = <0x00000000 0x8000000>; /* 128 MB */
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+		linux,stdout-path = &uart0;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+			 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+			 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		func {
+			label = "Function Button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "Power-on Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+
+		autopower {
+			label = "Power-auto Switch";
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_led_alarm &pmx_led_info &pmx_led_func
+			     &pmx_led_power>;
+		pinctrl-names = "default";
+
+		alarm {
+			label = "lswsgl:alarm:red";
+			gpio = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		info {
+			label = "lswsgl:info:amber";
+			gpio = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		func {
+			label = "lswsgl:func:blue:top";
+			gpio = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			label = "lswsgl:power:blue:bottom";
+			gpio = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	restart_poweroff {
+		compatible = "restart-poweroff";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power &pmx_usb_power>;
+		pinctrl-names = "default";
+
+		sata0_power: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata1_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "Full256Kb";
+			reg = <0 0x40000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy: ethernet-phy {
+		reg = <8>;
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
+
+&i2c {
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+
+	rtc@32 {
+		compatible = "ricoh,rs5c372a";
+		reg = <0x32>;
+	};
+};
+
+&pinctrl {
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp15", "mpp17", "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_alarm: pmx-leds {
+		marvell,pins = "mpp2";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_info: pmx-leds {
+		marvell,pins = "mpp3";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_func: pmx-leds {
+		marvell,pins = "mpp9";
+		marvell,function = "gpio";
+	};
+
+	pmx_led_power: pmx-leds {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata0_power: pmx-sata0-power {
+		marvell,pins = "mpp1";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_power: pmx-sata1-power {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_power: pmx-usb-power {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm/mach-orion5x/Kconfig

@@ -78,11 +78,11 @@ config MACH_LINKSTATION_LSCHL
 	  Buffalo Linkstation Live v3 (LS-CHL) platform.
 
 config MACH_LINKSTATION_MINI
-	bool "Buffalo Linkstation Mini"
-	select I2C_BOARDINFO
+	bool "Buffalo Linkstation Mini (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Buffalo Linkstation Mini platform.
+	  Buffalo Linkstation Mini (LS-WSGL) platform.
 
 config MACH_LINKSTATION_LS_HGL
 	bool "Buffalo Linkstation LS-HGL"

arch/arm/mach-orion5x/Makefile

@@ -4,7 +4,6 @@ obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
-obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o

arch/arm/mach-orion5x/lsmini-setup.c

-/*
- * arch/arm/mach-orion5x/lsmini-setup.c
- *
- * Maintainer: Alexey Kopytko <alexey@kopytko.ru>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/orion5x.h>
-#include "common.h"
-#include "mpp.h"
-
-/*****************************************************************************
- * Linkstation Mini Info
- ****************************************************************************/
-
-/*
- * 256K NOR flash Device bus boot chip select
- */
-
-#define LSMINI_NOR_BOOT_BASE	0xf4000000
-#define LSMINI_NOR_BOOT_SIZE	SZ_256K
-
-/*****************************************************************************
- * 256KB NOR Flash on BOOT Device
- ****************************************************************************/
-
-static struct physmap_flash_data lsmini_nor_flash_data = {
-	.width		= 1,
-};
-
-static struct resource lsmini_nor_flash_resource = {
-	.flags	= IORESOURCE_MEM,
-	.start	= LSMINI_NOR_BOOT_BASE,
-	.end	= LSMINI_NOR_BOOT_BASE + LSMINI_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lsmini_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev		= {
-		.platform_data	= &lsmini_nor_flash_data,
-	},
-	.num_resources		= 1,
-	.resource		= &lsmini_nor_flash_resource,
-};
-
-/*****************************************************************************
- * Ethernet
- ****************************************************************************/
-
-static struct mv643xx_eth_platform_data lsmini_eth_data = {
-	.phy_addr	= 8,
-};
-
-/*****************************************************************************
- * RTC 5C372a on I2C bus
- ****************************************************************************/
-
-static struct i2c_board_info __initdata lsmini_i2c_rtc = {
-	I2C_BOARD_INFO("rs5c372a", 0x32),
-};
-
-/*****************************************************************************
- * LEDs attached to GPIO
- ****************************************************************************/
-
-#define LSMINI_GPIO_LED_ALARM	2
-#define LSMINI_GPIO_LED_INFO	3
-#define LSMINI_GPIO_LED_FUNC	9
-#define LSMINI_GPIO_LED_PWR	14
-
-static struct gpio_led lsmini_led_pins[] = {
-	{
-		.name	   = "alarm:red",
-		.gpio	   = LSMINI_GPIO_LED_ALARM,
-		.active_low     = 1,
-	}, {
-		.name	   = "info:amber",
-		.gpio	   = LSMINI_GPIO_LED_INFO,
-		.active_low     = 1,
-	}, {
-		.name	   = "func:blue:top",
-		.gpio	   = LSMINI_GPIO_LED_FUNC,
-		.active_low     = 1,
-	}, {
-		.name	   = "power:blue:bottom",
-		.gpio	   = LSMINI_GPIO_LED_PWR,
-	},
-};
-
-static struct gpio_led_platform_data lsmini_led_data = {
-	.leds	   = lsmini_led_pins,
-	.num_leds       = ARRAY_SIZE(lsmini_led_pins),
-};
-
-static struct platform_device lsmini_leds = {
-	.name   = "leds-gpio",
-	.id     = -1,
-	.dev    = {
-		.platform_data  = &lsmini_led_data,
-	},
-};
-
-/****************************************************************************
- * GPIO Attached Keys
- ****************************************************************************/
-
-#define LSMINI_GPIO_KEY_FUNC       15
-#define LSMINI_GPIO_KEY_POWER	   18
-#define LSMINI_GPIO_KEY_AUTOPOWER 17
-
-#define LSMINI_SW_POWER		0x00
-#define LSMINI_SW_AUTOPOWER	0x01
-
-static struct gpio_keys_button lsmini_buttons[] = {
-	{
-		.code	   = KEY_OPTION,
-		.gpio	   = LSMINI_GPIO_KEY_FUNC,
-		.desc	   = "Function Button",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_POWER,
-		.gpio	   = LSMINI_GPIO_KEY_POWER,
-		.desc	   = "Power-on Switch",
-		.active_low     = 1,
-	}, {
-		.type		= EV_SW,
-		.code	   = LSMINI_SW_AUTOPOWER,
-		.gpio	   = LSMINI_GPIO_KEY_AUTOPOWER,
-		.desc	   = "Power-auto Switch",
-		.active_low     = 1,
-	},
-};
-
-static struct gpio_keys_platform_data lsmini_button_data = {
-	.buttons	= lsmini_buttons,
-	.nbuttons       = ARRAY_SIZE(lsmini_buttons),
-};
-
-static struct platform_device lsmini_button_device = {
-	.name	   = "gpio-keys",
-	.id	     = -1,
-	.num_resources  = 0,
-	.dev	    = {
-		.platform_data  = &lsmini_button_data,
-	},
-};
-
-
-/*****************************************************************************
- * SATA
- ****************************************************************************/
-static struct mv_sata_platform_data lsmini_sata_data = {
-	.n_ports	= 2,
-};
-
-
-/*****************************************************************************
- * Linkstation Mini specific power off method: reboot
- ****************************************************************************/
-/*
- * On the Linkstation Mini, the shutdown process is following:
- * - Userland monitors key events until the power switch goes to off position
- * - The board reboots
- * - U-boot starts and goes into an idle mode waiting for the user
- *   to move the switch to ON position
- */
-
-static void lsmini_power_off(void)
-{
-	orion5x_restart(REBOOT_HARD, NULL);
-}
-
-
-/*****************************************************************************
- * General Setup
- ****************************************************************************/
-
-#define LSMINI_GPIO_USB_POWER	16
-#define LSMINI_GPIO_AUTO_POWER	17
-#define LSMINI_GPIO_POWER	18
-
-#define LSMINI_GPIO_HDD_POWER0	1
-#define LSMINI_GPIO_HDD_POWER1	19
-
-static unsigned int lsmini_mpp_modes[] __initdata = {
-	MPP0_UNUSED, /* LED_RESERVE1 (unused) */
-	MPP1_GPIO, /* HDD_PWR */
-	MPP2_GPIO, /* LED_ALARM */
-	MPP3_GPIO, /* LED_INFO */
-	MPP4_UNUSED,
-	MPP5_UNUSED,
-	MPP6_UNUSED,
-	MPP7_UNUSED,
-	MPP8_UNUSED,
-	MPP9_GPIO, /* LED_FUNC */
-	MPP10_UNUSED,
-	MPP11_UNUSED, /* LED_ETH (dummy) */
-	MPP12_UNUSED,
-	MPP13_UNUSED,
-	MPP14_GPIO, /* LED_PWR */
-	MPP15_GPIO, /* FUNC */
-	MPP16_GPIO, /* USB_PWR */
-	MPP17_GPIO, /* AUTO_POWER */
-	MPP18_GPIO, /* POWER */
-	MPP19_GPIO, /* HDD_PWR1 */
-	0,
-};
-
-static void __init lsmini_init(void)
-{
-	/*
-	 * Setup basic Orion functions. Need to be called early.
-	 */
-	orion5x_init();
-
-	orion5x_mpp_conf(lsmini_mpp_modes);
-
-	/*
-	 * Configure peripherals.
-	 */
-	orion5x_ehci0_init();
-	orion5x_ehci1_init();
-	orion5x_eth_init(&lsmini_eth_data);
-	orion5x_i2c_init();
-	orion5x_sata_init(&lsmini_sata_data);
-	orion5x_uart0_init();
-	orion5x_xor_init();
-
-	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
-				    ORION_MBUS_DEVBUS_BOOT_ATTR,
-				    LSMINI_NOR_BOOT_BASE,
-				    LSMINI_NOR_BOOT_SIZE);
-	platform_device_register(&lsmini_nor_flash);
-
-	platform_device_register(&lsmini_button_device);
-
-	platform_device_register(&lsmini_leds);
-
-	i2c_register_board_info(0, &lsmini_i2c_rtc, 1);
-
-	/* enable USB power */
-	gpio_set_value(LSMINI_GPIO_USB_POWER, 1);
-
-	/* register power-off method */
-	pm_power_off = lsmini_power_off;
-
-	pr_info("%s: finished\n", __func__);
-}
-
-#ifdef CONFIG_MACH_LINKSTATION_MINI
-MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
-	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.atag_offset	= 0x100,
-	.init_machine	= lsmini_init,
-	.map_io		= orion5x_map_io,
-	.init_early	= orion5x_init_early,
-	.init_irq	= orion5x_init_irq,
-	.init_time	= orion5x_timer_init,
-	.fixup		= tag_fixup_mem32,
-	.restart	= orion5x_restart,
-MACHINE_END
-#endif