iio: pressure: hsc030pa: Use spi_read()

Use spi_read() instead of hand-writing it.
It is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/8327ac591d244ac85aa83c01e559076159c7ba12.1711283728.git.christophe.jaillet@wanadoo.frSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/pressure/hsc030pa_spi.c

@@ -23,14 +23,9 @@
 static int hsc_spi_recv(struct hsc_data *data)
 {
 	struct spi_device *spi = to_spi_device(data->dev);
-	struct spi_transfer xfer = {
-		.tx_buf = NULL,
-		.rx_buf = data->buffer,
-		.len = HSC_REG_MEASUREMENT_RD_SIZE,
-	};
 
 	msleep_interruptible(HSC_RESP_TIME_MS);
-	return spi_sync_transfer(spi, &xfer, 1);
+	return spi_read(spi, data->buffer, HSC_REG_MEASUREMENT_RD_SIZE);
 }
 
 static int hsc_spi_probe(struct spi_device *spi)