Commit 862a4a78 authored by Cory Tusar's avatar Cory Tusar Committed by Greg Kroah-Hartman

Documentation: devicetree: Add DT bindings to eeprom_93xx46 driver.

This commit documents bindings to be added to the eeprom_93xx46 driver
which will allow:

  - Device word size and read-only attributes to be specified.
  - A device-specific compatible string for use with Atmel AT93C46D
    EEPROMs.
  - Specifying a GPIO line to function as a 'select' or 'enable' signal
    prior to accessing the EEPROM.
Signed-off-by: default avatarCory Tusar <cory.tusar@pid1solutions.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Tested-by: default avatarChris Healy <chris.healy@zii.aero>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent cb54ad6c
EEPROMs (SPI) compatible with Microchip Technology 93xx46 family.
Required properties:
- compatible : shall be one of:
"atmel,at93c46d"
"eeprom-93xx46"
- data-size : number of data bits per word (either 8 or 16)
Optional properties:
- read-only : parameter-less property which disables writes to the EEPROM
- select-gpios : if present, specifies the GPIO that will be asserted prior to
each access to the EEPROM (e.g. for SPI bus multiplexing)
Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
apply. In particular, "reg" and "spi-max-frequency" properties must be given.
Example:
eeprom@0 {
compatible = "eeprom-93xx46";
reg = <0>;
spi-max-frequency = <1000000>;
spi-cs-high;
data-size = <8>;
select-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment