lpfc: Add support for RDP ELS command.

Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com>
Signed-off-by: James Smart <james.smart@avagotech.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

drivers/scsi/lpfc/lpfc.h

@@ -231,6 +231,7 @@ struct lpfc_stats {
 	uint32_t elsRcvRTV;
 	uint32_t elsRcvECHO;
 	uint32_t elsRcvLCB;
+	uint32_t elsRcvRDP;
 	uint32_t elsXmitFLOGI;
 	uint32_t elsXmitFDISC;
 	uint32_t elsXmitPLOGI;

drivers/scsi/lpfc/lpfc_crtn.h

@@ -498,3 +498,5 @@ bool lpfc_disable_oas_lun(struct lpfc_hba *, struct lpfc_name *,
 bool lpfc_find_next_oas_lun(struct lpfc_hba *, struct lpfc_name *,
 			    struct lpfc_name *, uint64_t *, struct lpfc_name *,
 			    struct lpfc_name *, uint64_t *, uint32_t *);
+int lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox);
+void lpfc_mbx_cmpl_rdp_page_a0(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb);

drivers/scsi/lpfc/lpfc_hw.h

@@ -543,6 +543,7 @@ struct fc_vft_header {
 #define ELS_CMD_TEST      0x11000000
 #define ELS_CMD_RRQ       0x12000000
 #define ELS_CMD_REC       0x13000000
+#define ELS_CMD_RDP       0x18000000
 #define ELS_CMD_PRLI      0x20100014
 #define ELS_CMD_PRLO      0x21100014
 #define ELS_CMD_PRLO_ACC  0x02100014
@@ -581,6 +582,7 @@ struct fc_vft_header {
 #define ELS_CMD_TEST      0x11
 #define ELS_CMD_RRQ       0x12
 #define ELS_CMD_REC       0x13
+#define ELS_CMD_RDP	  0x18
 #define ELS_CMD_PRLI      0x14001020
 #define ELS_CMD_PRLO      0x14001021
 #define ELS_CMD_PRLO_ACC  0x14001002
@@ -1042,6 +1044,168 @@ struct fc_lcb_res_frame {
 	uint16_t      lcb_duration;     /* LCB Payload Word 2, bit 15:0  */
 };
 
+/*
+ * Read Diagnostic Parameters (RDP) ELS frame.
+ */
+#define SFF_PG0_IDENT_SFP              0x3
+
+#define SFP_FLAG_PT_OPTICAL            0x0
+#define SFP_FLAG_PT_SWLASER            0x01
+#define SFP_FLAG_PT_LWLASER_LC1310     0x02
+#define SFP_FLAG_PT_LWLASER_LL1550     0x03
+#define SFP_FLAG_PT_MASK               0x0F
+#define SFP_FLAG_PT_SHIFT              0
+
+#define SFP_FLAG_IS_OPTICAL_PORT       0x01
+#define SFP_FLAG_IS_OPTICAL_MASK       0x010
+#define SFP_FLAG_IS_OPTICAL_SHIFT      4
+
+#define SFP_FLAG_IS_DESC_VALID         0x01
+#define SFP_FLAG_IS_DESC_VALID_MASK    0x020
+#define SFP_FLAG_IS_DESC_VALID_SHIFT   5
+
+#define SFP_FLAG_CT_UNKNOWN            0x0
+#define SFP_FLAG_CT_SFP_PLUS           0x01
+#define SFP_FLAG_CT_MASK               0x3C
+#define SFP_FLAG_CT_SHIFT              6
+
+struct fc_rdp_port_name_info {
+	uint8_t wwnn[8];
+	uint8_t wwpn[8];
+};
+
+
+/*
+ * Link Error Status Block Structure (FC-FS-3) for RDP
+ * This similar to RPS ELS
+ */
+struct fc_link_status {
+	uint32_t      link_failure_cnt;
+	uint32_t      loss_of_synch_cnt;
+	uint32_t      loss_of_signal_cnt;
+	uint32_t      primitive_seq_proto_err;
+	uint32_t      invalid_trans_word;
+	uint32_t      invalid_crc_cnt;
+
+};
+
+#define RDP_PORT_NAMES_DESC_TAG  0x00010003
+struct fc_rdp_port_name_desc {
+	uint32_t	tag;     /* 0001 0003h */
+	uint32_t	length;  /* set to size of payload struct */
+	struct fc_rdp_port_name_info  port_names;
+};
+
+
+struct fc_rdp_link_error_status_payload_info {
+	struct fc_link_status link_status; /* 24 bytes */
+	uint32_t  port_type;             /* bits 31-30 only */
+};
+
+#define RDP_LINK_ERROR_STATUS_DESC_TAG  0x00010002
+struct fc_rdp_link_error_status_desc {
+	uint32_t         tag;     /* 0001 0002h */
+	uint32_t         length;  /* set to size of payload struct */
+	struct fc_rdp_link_error_status_payload_info info;
+};
+
+#define VN_PT_PHY_UNKNOWN      0x00
+#define VN_PT_PHY_PF_PORT      0x01
+#define VN_PT_PHY_ETH_MAC      0x10
+#define VN_PT_PHY_SHIFT                30
+
+#define RDP_PS_1GB             0x8000
+#define RDP_PS_2GB             0x4000
+#define RDP_PS_4GB             0x2000
+#define RDP_PS_10GB            0x1000
+#define RDP_PS_8GB             0x0800
+#define RDP_PS_16GB            0x0400
+#define RDP_PS_32GB            0x0200
+
+#define RDP_CAP_UNKNOWN        0x0001
+#define RDP_PS_UNKNOWN         0x0002
+#define RDP_PS_NOT_ESTABLISHED 0x0001
+
+struct fc_rdp_port_speed {
+	uint16_t   capabilities;
+	uint16_t   speed;
+};
+
+struct fc_rdp_port_speed_info {
+	struct fc_rdp_port_speed   port_speed;
+};
+
+#define RDP_PORT_SPEED_DESC_TAG  0x00010001
+struct fc_rdp_port_speed_desc {
+	uint32_t         tag;            /* 00010001h */
+	uint32_t         length;         /* set to size of payload struct */
+	struct fc_rdp_port_speed_info info;
+};
+
+#define RDP_NPORT_ID_SIZE      4
+#define RDP_N_PORT_DESC_TAG    0x00000003
+struct fc_rdp_nport_desc {
+	uint32_t         tag;          /* 0000 0003h, big endian */
+	uint32_t         length;       /* size of RDP_N_PORT_ID struct */
+	uint32_t         nport_id : 12;
+	uint32_t         reserved : 8;
+};
+
+
+struct fc_rdp_link_service_info {
+	uint32_t         els_req;    /* Request payload word 0 value.*/
+};
+
+#define RDP_LINK_SERVICE_DESC_TAG  0x00000001
+struct fc_rdp_link_service_desc {
+	uint32_t         tag;     /* Descriptor tag  1 */
+	uint32_t         length;  /* set to size of payload struct. */
+	struct fc_rdp_link_service_info  payload;
+				  /* must be ELS req Word 0(0x18) */
+};
+
+struct fc_rdp_sfp_info {
+	uint16_t	temperature;
+	uint16_t	vcc;
+	uint16_t	tx_bias;
+	uint16_t	tx_power;
+	uint16_t	rx_power;
+	uint16_t	flags;
+};
+
+#define RDP_SFP_DESC_TAG  0x00010000
+struct fc_rdp_sfp_desc {
+	uint32_t         tag;
+	uint32_t         length;  /* set to size of sfp_info struct */
+	struct fc_rdp_sfp_info sfp_info;
+};
+
+struct fc_rdp_req_frame {
+	uint32_t         rdp_command;           /* ELS command opcode (0x18)*/
+	uint32_t         rdp_des_length;        /* RDP Payload Word 1 */
+	struct fc_rdp_nport_desc nport_id_desc; /* RDP Payload Word 2 - 4 */
+};
+
+
+struct fc_rdp_res_frame {
+	uint32_t	reply_sequence;		/* FC word0 LS_ACC or LS_RJT */
+	uint32_t	length;			/* FC Word 1      */
+	struct fc_rdp_link_service_desc link_service_desc;    /* Word 2 -4  */
+	struct fc_rdp_sfp_desc sfp_desc;                      /* Word 5 -9  */
+	struct fc_rdp_port_speed_desc portspeed_desc;         /* Word 10-12 */
+	struct fc_rdp_link_error_status_desc link_error_desc; /* Word 13-21 */
+	struct fc_rdp_port_name_desc diag_port_names_desc;    /* Word 22-27 */
+	struct fc_rdp_port_name_desc attached_port_names_desc;/* Word 28-33 */
+};
+
+
+#define RDP_DESC_PAYLOAD_SIZE (sizeof(struct fc_rdp_link_service_desc) \
+			+ sizeof(struct fc_rdp_sfp_desc) \
+			+ sizeof(struct fc_rdp_port_speed_desc) \
+			+ sizeof(struct fc_rdp_link_error_status_desc) \
+			+ (sizeof(struct fc_rdp_port_name_desc) * 2))
+
+
 /******** FDMI ********/
 
 /* lpfc_sli_ct_request defines the CT_IU preamble for FDMI commands */
@@ -1618,6 +1782,11 @@ typedef struct {		/* FireFly BIU registers */
 
 #define TEMPERATURE_OFFSET 0xB0	/* Slim offset for critical temperature event */
 
+/*
+ * return code Fail
+ */
+#define FAILURE 1
+
 /*
  *    Begin Structure Definitions for Mailbox Commands
  */

drivers/scsi/lpfc/lpfc_hw4.h

@@ -2455,6 +2455,205 @@ struct lpfc_mbx_supp_pages {
 #define LPFC_SLI4_PARAMETERS		2
 };
 
+struct lpfc_mbx_memory_dump_type3 {
+	uint32_t word1;
+#define lpfc_mbx_memory_dump_type3_type_SHIFT    0
+#define lpfc_mbx_memory_dump_type3_type_MASK     0x0000000f
+#define lpfc_mbx_memory_dump_type3_type_WORD     word1
+#define lpfc_mbx_memory_dump_type3_link_SHIFT    24
+#define lpfc_mbx_memory_dump_type3_link_MASK     0x000000ff
+#define lpfc_mbx_memory_dump_type3_link_WORD     word1
+	uint32_t word2;
+#define lpfc_mbx_memory_dump_type3_page_no_SHIFT  0
+#define lpfc_mbx_memory_dump_type3_page_no_MASK   0x0000ffff
+#define lpfc_mbx_memory_dump_type3_page_no_WORD   word2
+#define lpfc_mbx_memory_dump_type3_offset_SHIFT   16
+#define lpfc_mbx_memory_dump_type3_offset_MASK    0x0000ffff
+#define lpfc_mbx_memory_dump_type3_offset_WORD    word2
+	uint32_t word3;
+#define lpfc_mbx_memory_dump_type3_length_SHIFT  0
+#define lpfc_mbx_memory_dump_type3_length_MASK   0x00ffffff
+#define lpfc_mbx_memory_dump_type3_length_WORD   word3
+	uint32_t addr_lo;
+	uint32_t addr_hi;
+	uint32_t return_len;
+};
+
+#define DMP_PAGE_A0             0xa0
+#define DMP_PAGE_A2             0xa2
+#define DMP_SFF_PAGE_A0_SIZE	256
+#define DMP_SFF_PAGE_A2_SIZE	256
+
+#define SFP_WAVELENGTH_LC1310	1310
+#define SFP_WAVELENGTH_LL1550	1550
+
+
+/*
+ *  * SFF-8472 TABLE 3.4
+ *   */
+#define  SFF_PG0_CONNECTOR_UNKNOWN    0x00   /* Unknown  */
+#define  SFF_PG0_CONNECTOR_SC         0x01   /* SC       */
+#define  SFF_PG0_CONNECTOR_FC_COPPER1 0x02   /* FC style 1 copper connector */
+#define  SFF_PG0_CONNECTOR_FC_COPPER2 0x03   /* FC style 2 copper connector */
+#define  SFF_PG0_CONNECTOR_BNC        0x04   /* BNC / TNC */
+#define  SFF_PG0_CONNECTOR__FC_COAX   0x05   /* FC coaxial headers */
+#define  SFF_PG0_CONNECTOR_FIBERJACK  0x06   /* FiberJack */
+#define  SFF_PG0_CONNECTOR_LC         0x07   /* LC        */
+#define  SFF_PG0_CONNECTOR_MT         0x08   /* MT - RJ   */
+#define  SFF_PG0_CONNECTOR_MU         0x09   /* MU        */
+#define  SFF_PG0_CONNECTOR_SF         0x0A   /* SG        */
+#define  SFF_PG0_CONNECTOR_OPTICAL_PIGTAIL 0x0B /* Optical pigtail */
+#define  SFF_PG0_CONNECTOR_OPTICAL_PARALLEL 0x0C /* MPO Parallel Optic */
+#define  SFF_PG0_CONNECTOR_HSSDC_II   0x20   /* HSSDC II */
+#define  SFF_PG0_CONNECTOR_COPPER_PIGTAIL 0x21 /* Copper pigtail */
+#define  SFF_PG0_CONNECTOR_RJ45       0x22  /* RJ45 */
+
+/* SFF-8472 Table 3.1 Diagnostics: Data Fields Address/Page A0 */
+
+#define SSF_IDENTIFIER			0
+#define SSF_EXT_IDENTIFIER		1
+#define SSF_CONNECTOR			2
+#define SSF_TRANSCEIVER_CODE_B0		3
+#define SSF_TRANSCEIVER_CODE_B1		4
+#define SSF_TRANSCEIVER_CODE_B2		5
+#define SSF_TRANSCEIVER_CODE_B3		6
+#define SSF_TRANSCEIVER_CODE_B4		7
+#define SSF_TRANSCEIVER_CODE_B5		8
+#define SSF_TRANSCEIVER_CODE_B6		9
+#define SSF_TRANSCEIVER_CODE_B7		10
+#define SSF_ENCODING			11
+#define SSF_BR_NOMINAL			12
+#define SSF_RATE_IDENTIFIER		13
+#define SSF_LENGTH_9UM_KM		14
+#define SSF_LENGTH_9UM			15
+#define SSF_LENGTH_50UM_OM2		16
+#define SSF_LENGTH_62UM_OM1		17
+#define SFF_LENGTH_COPPER		18
+#define SSF_LENGTH_50UM_OM3		19
+#define SSF_VENDOR_NAME			20
+#define SSF_VENDOR_OUI			36
+#define SSF_VENDOR_PN			40
+#define SSF_VENDOR_REV			56
+#define SSF_WAVELENGTH_B1		60
+#define SSF_WAVELENGTH_B0		61
+#define SSF_CC_BASE			63
+#define SSF_OPTIONS_B1			64
+#define SSF_OPTIONS_B0			65
+#define SSF_BR_MAX			66
+#define SSF_BR_MIN			67
+#define SSF_VENDOR_SN			68
+#define SSF_DATE_CODE			84
+#define SSF_MONITORING_TYPEDIAGNOSTIC	92
+#define SSF_ENHANCED_OPTIONS		93
+#define SFF_8472_COMPLIANCE		94
+#define SSF_CC_EXT			95
+#define SSF_A0_VENDOR_SPECIFIC		96
+
+/* SFF-8472 Table 3.1a Diagnostics: Data Fields Address/Page A2 */
+
+#define SSF_AW_THRESHOLDS		0
+#define SSF_EXT_CAL_CONSTANTS		56
+#define SSF_CC_DMI			95
+#define SFF_TEMPERATURE_B1		96
+#define SFF_TEMPERATURE_B0		97
+#define SFF_VCC_B1			98
+#define SFF_VCC_B0			99
+#define SFF_TX_BIAS_CURRENT_B1		100
+#define SFF_TX_BIAS_CURRENT_B0		101
+#define SFF_TXPOWER_B1			102
+#define SFF_TXPOWER_B0			103
+#define SFF_RXPOWER_B1			104
+#define SFF_RXPOWER_B0			105
+#define SSF_STATUS_CONTROL		110
+#define SSF_ALARM_FLAGS_B1		112
+#define SSF_ALARM_FLAGS_B0		113
+#define SSF_WARNING_FLAGS_B1		116
+#define SSF_WARNING_FLAGS_B0		117
+#define SSF_EXT_TATUS_CONTROL_B1	118
+#define SSF_EXT_TATUS_CONTROL_B0	119
+#define SSF_A2_VENDOR_SPECIFIC		120
+#define SSF_USER_EEPROM			128
+#define SSF_VENDOR_CONTROL		148
+
+
+/*
+ * Tranceiver codes Fibre Channel SFF-8472
+ * Table 3.5.
+ */
+
+struct sff_trasnceiver_codes_byte0 {
+	uint8_t inifiband:4;
+	uint8_t teng_ethernet:4;
+};
+
+struct sff_trasnceiver_codes_byte1 {
+	uint8_t  sonet:6;
+	uint8_t  escon:2;
+};
+
+struct sff_trasnceiver_codes_byte2 {
+	uint8_t  soNet:8;
+};
+
+struct sff_trasnceiver_codes_byte3 {
+	uint8_t ethernet:8;
+};
+
+struct sff_trasnceiver_codes_byte4 {
+	uint8_t fc_el_lo:1;
+	uint8_t fc_lw_laser:1;
+	uint8_t fc_sw_laser:1;
+	uint8_t fc_md_distance:1;
+	uint8_t fc_lg_distance:1;
+	uint8_t fc_int_distance:1;
+	uint8_t fc_short_distance:1;
+	uint8_t fc_vld_distance:1;
+};
+
+struct sff_trasnceiver_codes_byte5 {
+	uint8_t reserved1:1;
+	uint8_t reserved2:1;
+	uint8_t fc_sfp_active:1;  /* Active cable   */
+	uint8_t fc_sfp_passive:1; /* Passive cable  */
+	uint8_t fc_lw_laser:1;     /* Longwave laser */
+	uint8_t fc_sw_laser_sl:1;
+	uint8_t fc_sw_laser_sn:1;
+	uint8_t fc_el_hi:1;        /* Electrical enclosure high bit */
+};
+
+struct sff_trasnceiver_codes_byte6 {
+	uint8_t fc_tm_sm:1;      /* Single Mode */
+	uint8_t reserved:1;
+	uint8_t fc_tm_m6:1;       /* Multimode, 62.5um (M6) */
+	uint8_t fc_tm_tv:1;      /* Video Coax (TV) */
+	uint8_t fc_tm_mi:1;      /* Miniature Coax (MI) */
+	uint8_t fc_tm_tp:1;      /* Twisted Pair (TP) */
+	uint8_t fc_tm_tw:1;      /* Twin Axial Pair  */
+};
+
+struct sff_trasnceiver_codes_byte7 {
+	uint8_t fc_sp_100MB:1;   /*  100 MB/sec */
+	uint8_t reserve:1;
+	uint8_t fc_sp_200mb:1;   /*  200 MB/sec */
+	uint8_t fc_sp_3200MB:1;  /* 3200 MB/sec */
+	uint8_t fc_sp_400MB:1;   /*  400 MB/sec */
+	uint8_t fc_sp_1600MB:1;  /* 1600 MB/sec */
+	uint8_t fc_sp_800MB:1;   /*  800 MB/sec */
+	uint8_t fc_sp_1200MB:1;  /* 1200 MB/sec */
+};
+
+/* User writable non-volatile memory, SFF-8472 Table 3.20 */
+struct user_eeprom {
+	uint8_t vendor_name[16];
+	uint8_t vendor_oui[3];
+	uint8_t vendor_pn[816];
+	uint8_t vendor_rev[4];
+	uint8_t vendor_sn[16];
+	uint8_t datecode[6];
+	uint8_t lot_code[2];
+	uint8_t reserved191[57];
+};
+
 struct lpfc_mbx_pc_sli4_params {
 	uint32_t word1;
 #define qs_SHIFT				0
@@ -3054,6 +3253,7 @@ struct lpfc_mqe {
 		struct lpfc_mbx_get_prof_cfg get_prof_cfg;
 		struct lpfc_mbx_wr_object wr_object;
 		struct lpfc_mbx_get_port_name get_port_name;
+		struct lpfc_mbx_memory_dump_type3 mem_dump_type3;
 		struct lpfc_mbx_nop nop;
 	} un;
 };
@@ -3199,6 +3399,7 @@ struct lpfc_acqe_fc_la {
 #define LPFC_FC_LA_SPEED_8G		0x8
 #define LPFC_FC_LA_SPEED_10G		0xA
 #define LPFC_FC_LA_SPEED_16G		0x10
+#define LPFC_FC_LA_SPEED_32G            0x20
 #define lpfc_acqe_fc_la_topology_SHIFT		16
 #define lpfc_acqe_fc_la_topology_MASK		0x000000FF
 #define lpfc_acqe_fc_la_topology_WORD		word0

drivers/scsi/lpfc/lpfc_mbox.c

@@ -2255,6 +2255,158 @@ lpfc_sli4_dump_cfg_rg23(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
 	return 0;
 }
 
+void
+lpfc_mbx_cmpl_rdp_link_stat(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	MAILBOX_t *mb;
+	int rc = FAILURE;
+	struct lpfc_rdp_context *rdp_context =
+			(struct lpfc_rdp_context *)(mboxq->context2);
+
+	mb = &mboxq->u.mb;
+	if (mb->mbxStatus)
+		goto mbx_failed;
+
+	memcpy(&rdp_context->link_stat, &mb->un.varRdLnk, sizeof(READ_LNK_VAR));
+
+	rc = SUCCESS;
+
+mbx_failed:
+	lpfc_sli4_mbox_cmd_free(phba, mboxq);
+	rdp_context->cmpl(phba, rdp_context, rc);
+}
+
+void
+lpfc_mbx_cmpl_rdp_page_a2(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) mbox->context1;
+	struct lpfc_rdp_context *rdp_context =
+			(struct lpfc_rdp_context *)(mbox->context2);
+
+	if (bf_get(lpfc_mqe_status, &mbox->u.mqe))
+		goto error;
+
+	lpfc_sli_bemem_bcopy(mp->virt, &rdp_context->page_a2,
+				DMP_SFF_PAGE_A2_SIZE);
+
+	/* We don't need dma buffer for link stat. */
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+
+	memset(mbox, 0, sizeof(*mbox));
+	lpfc_read_lnk_stat(phba, mbox);
+	mbox->vport = rdp_context->ndlp->vport;
+	mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_link_stat;
+	mbox->context2 = (struct lpfc_rdp_context *) rdp_context;
+	if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) == MBX_NOT_FINISHED)
+		goto error;
+
+	return;
+
+error:
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	rdp_context->cmpl(phba, rdp_context, FAILURE);
+}
+
+void
+lpfc_mbx_cmpl_rdp_page_a0(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox)
+{
+	int rc;
+	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (mbox->context1);
+	struct lpfc_rdp_context *rdp_context =
+			(struct lpfc_rdp_context *)(mbox->context2);
+
+	if (bf_get(lpfc_mqe_status, &mbox->u.mqe))
+		goto error;
+
+	lpfc_sli_bemem_bcopy(mp->virt, &rdp_context->page_a0,
+				DMP_SFF_PAGE_A0_SIZE);
+
+	memset(mbox, 0, sizeof(*mbox));
+
+	memset(mp->virt, 0, DMP_SFF_PAGE_A2_SIZE);
+	INIT_LIST_HEAD(&mp->list);
+
+	/* save address for completion */
+	mbox->context1 = mp;
+	mbox->vport = rdp_context->ndlp->vport;
+
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_DUMP_MEMORY);
+	bf_set(lpfc_mbx_memory_dump_type3_type,
+		&mbox->u.mqe.un.mem_dump_type3, DMP_LMSD);
+	bf_set(lpfc_mbx_memory_dump_type3_link,
+		&mbox->u.mqe.un.mem_dump_type3, phba->sli4_hba.physical_port);
+	bf_set(lpfc_mbx_memory_dump_type3_page_no,
+		&mbox->u.mqe.un.mem_dump_type3, DMP_PAGE_A2);
+	bf_set(lpfc_mbx_memory_dump_type3_length,
+		&mbox->u.mqe.un.mem_dump_type3, DMP_SFF_PAGE_A2_SIZE);
+	mbox->u.mqe.un.mem_dump_type3.addr_lo = putPaddrLow(mp->phys);
+	mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys);
+
+	mbox->mbox_cmpl = lpfc_mbx_cmpl_rdp_page_a2;
+	mbox->context2 = (struct lpfc_rdp_context *) rdp_context;
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		goto error;
+
+	return;
+
+error:
+	lpfc_mbuf_free(phba, mp->virt, mp->phys);
+	kfree(mp);
+	lpfc_sli4_mbox_cmd_free(phba, mbox);
+	rdp_context->cmpl(phba, rdp_context, FAILURE);
+}
+
+
+/*
+ * lpfc_sli4_dump_sfp_pagea0 - Dump sli4 read SFP Diagnostic.
+ * @phba: pointer to the hba structure containing.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * This function create a SLI4 dump mailbox command to dump configure
+ * type 3 page 0xA0.
+ */
+int
+lpfc_sli4_dump_page_a0(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+	struct lpfc_dmabuf *mp = NULL;
+
+	memset(mbox, 0, sizeof(*mbox));
+
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (mp)
+		mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+	if (!mp || !mp->virt) {
+		kfree(mp);
+		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+			"3569 dump type 3 page 0xA0 allocation failed\n");
+		return 1;
+	}
+
+	memset(mp->virt, 0, LPFC_BPL_SIZE);
+	INIT_LIST_HEAD(&mp->list);
+
+	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_DUMP_MEMORY);
+	/* save address for completion */
+	mbox->context1 = mp;
+
+	bf_set(lpfc_mbx_memory_dump_type3_type,
+		&mbox->u.mqe.un.mem_dump_type3, DMP_LMSD);
+	bf_set(lpfc_mbx_memory_dump_type3_link,
+		&mbox->u.mqe.un.mem_dump_type3, phba->sli4_hba.physical_port);
+	bf_set(lpfc_mbx_memory_dump_type3_page_no,
+		&mbox->u.mqe.un.mem_dump_type3, DMP_PAGE_A0);
+	bf_set(lpfc_mbx_memory_dump_type3_length,
+		&mbox->u.mqe.un.mem_dump_type3, DMP_SFF_PAGE_A0_SIZE);
+	mbox->u.mqe.un.mem_dump_type3.addr_lo = putPaddrLow(mp->phys);
+	mbox->u.mqe.un.mem_dump_type3.addr_hi = putPaddrHigh(mp->phys);
+
+	return 0;
+}
+
 /**
  * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
  * @phba: pointer to the hba structure containing the FCF index and RQ ID.

drivers/scsi/lpfc/lpfc_sli4.h

@@ -652,6 +652,16 @@ struct lpfc_rsrc_blks {
 	uint16_t rsrc_used;
 };
 
+struct lpfc_rdp_context {
+	struct lpfc_nodelist *ndlp;
+	uint16_t ox_id;
+	uint16_t rx_id;
+	READ_LNK_VAR link_stat;
+	uint8_t page_a0[DMP_SFF_PAGE_A0_SIZE];
+	uint8_t page_a2[DMP_SFF_PAGE_A2_SIZE];
+	void (*cmpl)(struct lpfc_hba *, struct lpfc_rdp_context*, int);
+};
+
 struct lpfc_lcb_context {
 	uint8_t  sub_command;
 	uint8_t  type;