Commit 864ad85f authored by Huang, Xiong's avatar Huang, Xiong Committed by David S. Miller

atl1c: remove VPD register

VPD register is only used for L1(devid=PCI_DEVICE_ID_ATTANSIC_L1) to
access external NV-memory.
l1c & later chip doesn't use it any more.
PHY 0/1 registers occupy the last 2 slots of the dump table.
Signed-off-by: default avatarxiong <xiong@qca.qualcomm.com>
Tested-by: default avatarLiu David <dwliu@qca.qualcomm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f4e5db2b
......@@ -100,7 +100,7 @@
#define ATL1C_ASPM_L0s_ENABLE 0x0001
#define ATL1C_ASPM_L1_ENABLE 0x0002
#define AT_REGS_LEN (75 * sizeof(u32))
#define AT_REGS_LEN (74 * sizeof(u32))
#define AT_EEPROM_LEN 512
#define ATL1C_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i]))
......
......@@ -141,8 +141,7 @@ static void atl1c_get_regs(struct net_device *netdev,
memset(p, 0, AT_REGS_LEN);
regs->version = 0;
AT_READ_REG(hw, REG_VPD_CAP, p++);
regs->version = 1;
AT_READ_REG(hw, REG_PM_CTRL, p++);
AT_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL, p++);
AT_READ_REG(hw, REG_TWSI_CTRL, p++);
......@@ -167,9 +166,9 @@ static void atl1c_get_regs(struct net_device *netdev,
AT_READ_REG(hw, REG_WOL_CTRL, p++);
atl1c_read_phy_reg(hw, MII_BMCR, &phy_data);
regs_buff[73] = (u32) phy_data;
regs_buff[AT_REGS_LEN/sizeof(u32) - 2] = (u32) phy_data;
atl1c_read_phy_reg(hw, MII_BMSR, &phy_data);
regs_buff[74] = (u32) phy_data;
regs_buff[AT_REGS_LEN/sizeof(u32) - 1] = (u32) phy_data;
}
static int atl1c_get_eeprom_len(struct net_device *netdev)
......
......@@ -59,17 +59,6 @@ int atl1c_phy_power_saving(struct atl1c_hw *hw);
#define LINK_CTRL_L1_EN 0x02
#define LINK_CTRL_EXT_SYNC 0x80
#define REG_VPD_CAP 0x6C
#define VPD_CAP_ID_MASK 0xff
#define VPD_CAP_ID_SHIFT 0
#define VPD_CAP_NEXT_PTR_MASK 0xFF
#define VPD_CAP_NEXT_PTR_SHIFT 8
#define VPD_CAP_VPD_ADDR_MASK 0x7FFF
#define VPD_CAP_VPD_ADDR_SHIFT 16
#define VPD_CAP_VPD_FLAG 0x80000000
#define REG_VPD_DATA 0x70
#define REG_PCIE_UC_SEVERITY 0x10C
#define PCIE_UC_SERVRITY_TRN 0x00000001
#define PCIE_UC_SERVRITY_DLP 0x00000010
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment