Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "You will get the following new drivers:

   - Qualcomm PM8941 power key drver
   - ChipOne icn8318 touchscreen controller driver
   - Broadcom iProc touchscreen and keypad drivers
   - Semtech SX8654 I2C touchscreen controller driver

  ALPS driver now supports newer SS4 devices; Elantech got a fix that
  should make it work on some ASUS laptops; and a slew of other
  enhancements and random fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: alps - non interleaved V2 dualpoint has separate stick button bits
  Input: alps - fix touchpad buttons getting stuck when used with trackpoint
  Input: atkbd - document "no new force-release quirks" policy
  Input: ALPS - make alps_get_pkt_id_ss4_v2() and others static
  Input: ALPS - V7 devices can report 5-finger taps
  Input: ALPS - add support for SS4 touchpad devices
  Input: ALPS - refactor alps_set_abs_params_mt()
  Input: elantech - fix absolute mode setting on some ASUS laptops
  Input: atmel_mxt_ts - split out touchpad initialisation logic
  Input: atmel_mxt_ts - implement support for T100 touch object
  Input: cros_ec_keyb - fix clearing keyboard state on wakeup
  Input: gscps2 - drop pci_ids dependency
  Input: synaptics - allocate 3 slots to keep stability in image sensors
  Input: Revert "Revert "synaptics - use dmax in input_mt_assign_slots""
  Input: MT - make slot assignment work for overcovered solutions
  mfd: tc3589x: enforce device-tree only mode
  Input: tc3589x - localize platform data
  Input: tsc2007 - Convert msecs to jiffies only once
  Input: edt-ft5x06 - remove EV_SYN event report
  Input: edt-ft5x06 - allow to setting the maximum axes value through the DT
  ...

Documentation/devicetree/bindings/input/brcm,bcm-keypad.txt

+* Broadcom Keypad Controller device tree bindings
+
+Broadcom Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+This binding is based on the matrix-keymap binding with the following
+changes:
+
+keypad,num-rows and keypad,num-columns are required.
+
+Required SoC Specific Properties:
+- compatible: should be "brcm,bcm-keypad"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- interrupts: The interrupt number to the cpu.
+
+Board Specific Properties:
+- keypad,num-rows: Number of row lines connected to the keypad
+  controller.
+
+- keypad,num-columns: Number of column lines connected to the
+  keypad controller.
+
+- col-debounce-filter-period: The debounce period for the Column filter.
+
+	KEYPAD_DEBOUNCE_1_ms	=	0
+	KEYPAD_DEBOUNCE_2_ms	=	1
+	KEYPAD_DEBOUNCE_4_ms	=	2
+	KEYPAD_DEBOUNCE_8_ms	=	3
+	KEYPAD_DEBOUNCE_16_ms	=	4
+	KEYPAD_DEBOUNCE_32_ms	=	5
+	KEYPAD_DEBOUNCE_64_ms	=	6
+	KEYPAD_DEBOUNCE_128_ms	=	7
+
+- status-debounce-filter-period: The debounce period for the Status filter.
+
+	KEYPAD_DEBOUNCE_1_ms	=	0
+	KEYPAD_DEBOUNCE_2_ms	=	1
+	KEYPAD_DEBOUNCE_4_ms	=	2
+	KEYPAD_DEBOUNCE_8_ms	=	3
+	KEYPAD_DEBOUNCE_16_ms	=	4
+	KEYPAD_DEBOUNCE_32_ms	=	5
+	KEYPAD_DEBOUNCE_64_ms	=	6
+	KEYPAD_DEBOUNCE_128_ms	=	7
+
+- row-output-enabled: An optional property indicating whether the row or
+  column is being used as output. If specified the row is being used
+  as the output. Else defaults to column.
+
+- pull-up-enabled: An optional property indicating the Keypad scan mode.
+  If specified implies the keypad scan pull-up has been enabled.
+
+- autorepeat: Boolean, Enable auto repeat feature of Linux input
+	  subsystem (optional).
+
+- linux,keymap: The keymap for keys as described in the binding document
+  devicetree/bindings/input/matrix-keymap.txt.
+
+Example:
+#include "dt-bindings/input/input.h"
+
+/ {
+	keypad: keypad@180ac000 {
+		/* Required SoC specific properties */
+		compatible = "brcm,bcm-keypad";
+
+		/* Required Board specific properties */
+		keypad,num-rows = <5>;
+		keypad,num-columns = <5>;
+		status = "okay";
+
+		linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_F) /* key_forward */
+		MATRIX_KEY(0x00, 0x03, KEY_HOME) /* key_home */
+		MATRIX_KEY(0x00, 0x04, KEY_M) /* key_message */
+		MATRIX_KEY(0x01, 0x00, KEY_A) /* key_contacts */
+		MATRIX_KEY(0x01, 0x01, KEY_1) /* key_1 */
+		MATRIX_KEY(0x01, 0x02, KEY_2) /* key_2 */
+		MATRIX_KEY(0x01, 0x03, KEY_3) /* key_3 */
+		MATRIX_KEY(0x01, 0x04, KEY_S) /* key_speaker */
+		MATRIX_KEY(0x02, 0x00, KEY_P) /* key_phone */
+		MATRIX_KEY(0x02, 0x01, KEY_4) /* key_4 */
+		MATRIX_KEY(0x02, 0x02, KEY_5) /* key_5 */
+		MATRIX_KEY(0x02, 0x03, KEY_6) /* key_6 */
+		MATRIX_KEY(0x02, 0x04, KEY_VOLUMEUP) /* key_vol_up */
+		MATRIX_KEY(0x03, 0x00, KEY_C) /* key_call_log */
+		MATRIX_KEY(0x03, 0x01, KEY_7) /* key_7 */
+		MATRIX_KEY(0x03, 0x02, KEY_8) /* key_8 */
+		MATRIX_KEY(0x03, 0x03, KEY_9) /* key_9 */
+		MATRIX_KEY(0x03, 0x04, KEY_VOLUMEDOWN) /* key_vol_down */
+		MATRIX_KEY(0x04, 0x00, KEY_H) /* key_headset */
+		MATRIX_KEY(0x04, 0x01, KEY_KPASTERISK) /* key_* */
+		MATRIX_KEY(0x04, 0x02, KEY_0) /* key_0 */
+		MATRIX_KEY(0x04, 0x03, KEY_GRAVE) /* key_# */
+		MATRIX_KEY(0x04, 0x04, KEY_MUTE) /* key_mute */
+		>;
+
+		/* Optional board specific properties */
+		col-debounce-filter-period = <5>;
+		row-output-enabled;
+		pull-up-enabled;
+
+	};
+};

Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt

+Qualcomm PM8941 PMIC Power Key
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,pm8941-pwrkey"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address of registers for block
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: key change interrupt; The format of the specifier is
+		    defined by the binding document describing the node's
+		    interrupt parent.
+
+- debounce:
+	Usage: optional
+	Value type: <u32>
+	Definition: time in microseconds that key must be pressed or released
+		    for state change interrupt to trigger.
+
+- bias-pull-up:
+	Usage: optional
+	Value type: <empty>
+	Definition: presence of this property indicates that the KPDPWR_N pin
+		    should be configured for pull up.
+
+EXAMPLE
+
+	pwrkey@800 {
+		compatible = "qcom,pm8941-pwrkey";
+		reg = <0x800>;
+		interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		bias-pull-up;
+	};

Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt

+* Broadcom's IPROC Touchscreen Controller
+
+Required properties:
+- compatible: must be "brcm,iproc-touchscreen"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- clocks:  The clock provided by the SOC to driver the tsc
+- clock-name:  name for the clock
+- interrupts: The touchscreen controller's interrupt
+
+Optional properties:
+- scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
+- debounce_timeout: Each step is 512 us.  Valid 0-255
+- settling_timeout: The settling duration (in ms) is the amount of time
+                    the tsc waits to allow the voltage to settle after
+                    turning on the drivers in detection mode.
+                    Valid values: 0-11
+                    0 =  0.008 ms
+                    1 =  0.01 ms
+                    2 =  0.02 ms
+                    3 =  0.04 ms
+                    4 =  0.08 ms
+                    5 =  0.16 ms
+                    6 =  0.32 ms
+                    7 =  0.64 ms
+                    8 =  1.28 ms
+                    9 =  2.56 ms
+                   10 =  5.12 ms
+                   11 = 10.24 ms
+- touch_timeout: The continuous number of scan periods in which touch is
+                not detected before the controller returns to idle state.
+                Valid values 0-255.
+- average_data: Number of data samples which are averaged before a final
+                data point is placed into the FIFO
+                Valid values 0-7
+                0 =   1 sample
+                1 =   2 samples
+                2 =   4 samples
+                3 =   8 samples
+                4 =  16 samples
+                5 =  32 samples
+                6 =  64 samples
+                7 = 128 samples
+- fifo_threshold: Interrupt is generated whenever the number of fifo
+                entries exceeds this value
+                Valid values 0-31
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+- touchscreen-fuzz-x: horizontal noise value of the absolute input
+                      device (in pixels)
+- touchscreen-fuzz-y: vertical noise value of the absolute input
+                      device (in pixels)
+- touchscreen-inverted-x: X axis is inverted (boolean)
+- touchscreen-inverted-y: Y axis is inverted (boolean)
+
+Example:
+
+	touchscreen: tsc@0x180A6000 {
+		compatible = "brcm,iproc-touchscreen";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x180A6000 0x40>;
+		clocks = <&adc_clk>;
+		clock-names = "tsc_clk";
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+		scanning_period = <5>;
+		debounce_timeout = <40>;
+		settling_timeout = <7>;
+		touch_timeout = <10>;
+		average_data = <5>;
+		fifo_threshold = <1>;
+		/* Touchscreen is rotated 180 degrees. */
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+	};

Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt

+* ChipOne icn8318 I2C touchscreen controller
+
+Required properties:
+ - compatible		  : "chipone,icn8318"
+ - reg			  : I2C slave address of the chip (0x40)
+ - interrupt-parent	  : a phandle pointing to the interrupt controller
+			    serving the interrupt for this chip
+ - interrupts		  : interrupt specification for the icn8318 interrupt
+ - wake-gpios		  : GPIO specification for the WAKE input
+ - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
+ - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
+
+Optional properties:
+ - pinctrl-names	  : should be "default"
+ - pinctrl-0:		  : a phandle pointing to the pin settings for the
+			    control gpios
+ - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
+			    device (in pixels)
+ - touchscreen-fuzz-y	  : vertical noise value of the absolute input
+			    device (in pixels)
+ - touchscreen-inverted-x : X axis is inverted (boolean)
+ - touchscreen-inverted-y : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y	  : X and Y axis are swapped (boolean)
+			    Swapping is done after inverting the axis
+
+Example:
+
+i2c@00000000 {
+	/* ... */
+
+	chipone_icn8318@40 {
+		compatible = "chipone,icn8318";
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_wake_pin_p66>;
+		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+
+	/* ... */
+};

Documentation/devicetree/bindings/input/touchscreen/goodix.txt

+Device tree bindings for Goodix GT9xx series touchscreen controller
+
+Required properties:
+
+ - compatible		: Should be "goodix,gt911"
+				 or "goodix,gt9110"
+				 or "goodix,gt912"
+				 or "goodix,gt927"
+				 or "goodix,gt9271"
+				 or "goodix,gt928"
+				 or "goodix,gt967"
+ - reg			: I2C address of the chip. Should be 0x5d or 0x14
+ - interrupt-parent	: Interrupt controller to which the chip is connected
+ - interrupts		: Interrupt to which the chip is connected
+
+Example:
+
+	i2c@00000000 {
+		/* ... */
+
+		gt928@5d {
+			compatible = "goodix,gt928";
+			reg = <0x5d>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 0>;
+		};
+
+		/* ... */
+	};

Documentation/devicetree/bindings/input/touchscreen/sun4i.txt

@@ -2,14 +2,27 @@ sun4i resistive touchscreen controller
 --------------------------------------
 
 Required properties:
- - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun6i-a31-ts"
+ - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
+   "allwinner,sun6i-a31-ts"
  - reg: mmio address range of the chip
  - interrupts: interrupt to which the chip is connected
  - #thermal-sensor-cells: shall be 0
 
 Optional properties:
- - allwinner,ts-attached: boolean indicating that an actual touchscreen is
-			  attached to the controller
+ - allwinner,ts-attached	 : boolean indicating that an actual touchscreen
+				   is attached to the controller
+ - allwinner,tp-sensitive-adjust : integer (4 bits)
+				   adjust sensitivity of pen down detection
+				   between 0 (least sensitive) and 15
+				   (defaults to 15)
+ - allwinner,filter-type	 : integer (2 bits)
+				   select median and averaging filter
+				   samples used for median / averaging filter
+				   0: 4/2
+				   1: 5/3
+				   2: 8/4
+				   3: 16/8
+				   (defaults to 1)
 
 Example:
 
@@ -19,4 +32,7 @@ Example:
 		interrupts = <29>;
 		allwinner,ts-attached;
 		#thermal-sensor-cells = <0>;
+		/* sensitive/noisy touch panel */
+		allwinner,tp-sensitive-adjust = <0>;
+		allwinner,filter-type = <3>;
 	};

Documentation/devicetree/bindings/input/touchscreen/sx8654.txt

+* Semtech SX8654 I2C Touchscreen Controller
+
+Required properties:
+- compatible: must be "semtech,sx8654"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+
+Example:
+
+	sx8654@48 {
+		compatible = "semtech,sx8654";
+		reg = <0x48>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};

Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt

@@ -16,6 +16,8 @@ Optional properties for Touchscreens:
 				  controller)
  - touchscreen-inverted-x	: X axis is inverted (boolean)
  - touchscreen-inverted-y	: Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
+				  Swapping is done after inverting the axis
 
 Deprecated properties for Touchscreens:
  - x-size			: deprecated name for touchscreen-size-x

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -37,6 +37,7 @@ capella	Capella Microsystems, Inc
 cavium	Cavium, Inc.
 cdns	Cadence Design Systems Inc.
 chipidea	Chipidea, Inc
+chipone		ChipOne
 chipspark	ChipSPARK
 chrp	Common Hardware Reference Platform
 chunghwa	Chunghwa Picture Tubes Ltd.
@@ -78,6 +79,7 @@ geniatech	Geniatech, Inc.
 giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
 gmt	Global Mixed-mode Technology, Inc.
+goodix	Shenzhen Huiding Technology Co., Ltd.
 google	Google, Inc.
 gumstix	Gumstix, Inc.
 gw	Gateworks Corporation

MAINTAINERS

@@ -2525,6 +2525,13 @@ L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/chipidea/
 
+CHIPONE ICN8318 I2C TOUCHSCREEN DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+F:	drivers/input/touchscreen/chipone_icn8318.c
+
 CHROME HARDWARE PLATFORM SUPPORT
 M:	Olof Johansson <olof@lixom.net>
 S:	Maintained

drivers/hid/hid-debug.c

@@ -815,7 +815,7 @@ static const char *keys[KEY_MAX + 1] = {
 	[KEY_DELETEFILE] = "DeleteFile",	[KEY_XFER] = "X-fer",
 	[KEY_PROG1] = "Prog1",			[KEY_PROG2] = "Prog2",
 	[KEY_WWW] = "WWW",			[KEY_MSDOS] = "MSDOS",
-	[KEY_COFFEE] = "Coffee",		[KEY_DIRECTION] = "Direction",
+	[KEY_COFFEE] = "Coffee",		[KEY_ROTATE_DISPLAY] = "RotateDisplay",
 	[KEY_CYCLEWINDOWS] = "CycleWindows",	[KEY_MAIL] = "Mail",
 	[KEY_BOOKMARKS] = "Bookmarks",		[KEY_COMPUTER] = "Computer",
 	[KEY_BACK] = "Back",			[KEY_FORWARD] = "Forward",

drivers/input/input-mt.c

@@ -368,27 +368,35 @@ static void input_mt_set_slots(struct input_mt *mt,
 			       int *slots, int num_pos)
 {
 	struct input_mt_slot *s;
-	int *w = mt->red, *p;
+	int *w = mt->red, j;
 
-	for (p = slots; p != slots + num_pos; p++)
-		*p = -1;
+	for (j = 0; j != num_pos; j++)
+		slots[j] = -1;
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
 		if (!input_mt_is_active(s))
 			continue;
-		for (p = slots; p != slots + num_pos; p++)
-			if (*w++ < 0)
-				*p = s - mt->slots;
+
+		for (j = 0; j != num_pos; j++) {
+			if (w[j] < 0) {
+				slots[j] = s - mt->slots;
+				break;
+			}
+		}
+
+		w += num_pos;
 	}
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
 		if (input_mt_is_active(s))
 			continue;
-		for (p = slots; p != slots + num_pos; p++)
-			if (*p < 0) {
-				*p = s - mt->slots;
+
+		for (j = 0; j != num_pos; j++) {
+			if (slots[j] < 0) {
+				slots[j] = s - mt->slots;
 				break;
 			}
+		}
 	}
 }
 

drivers/input/keyboard/Kconfig

@@ -588,6 +588,16 @@ config KEYBOARD_DAVINCI
 	  To compile this driver as a module, choose M here: the
 	  module will be called davinci_keyscan.
 
+config KEYBOARD_IPAQ_MICRO
+	tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y to enable support for the buttons attached to
+	  Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
@@ -686,4 +696,15 @@ config KEYBOARD_CAP11XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called cap11xx.
 
+config KEYBOARD_BCM
+	tristate "Broadcom keypad driver"
+	depends on OF && HAVE_CLK
+	select INPUT_MATRIXKMAP
+	default ARCH_BCM_CYGNUS
+	help
+	  Say Y here if you want to use Broadcom keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm-keypad.
+
 endif

drivers/input/keyboard/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o

drivers/input/keyboard/atkbd.c

@@ -1653,6 +1653,12 @@ static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
 	return 1;
 }
 
+/*
+ * NOTE: do not add any more "force release" quirks to this table.  The
+ * task of adjusting list of keys that should be "released" automatically
+ * by the driver is now delegated to userspace tools, such as udev, so
+ * submit such quirks there.
+ */
 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 	{
 		.matches = {

drivers/input/keyboard/cros_ec_keyb.c

@@ -338,7 +338,7 @@ static int cros_ec_keyb_resume(struct device *dev)
 	 * wake source (e.g. the lid is open and the user might press a key to
 	 * wake) then the key scan buffer should be preserved.
 	 */
-	if (ckdev->ec->was_wake_device)
+	if (!ckdev->ec->was_wake_device)
 		cros_ec_keyb_clear_keyboard(ckdev);
 
 	return 0;

drivers/input/keyboard/ipaq-micro-keys.c

+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, key subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct ipaq_micro_keys {
+	struct ipaq_micro *micro;
+	struct input_dev *input;
+	u16 *codes;
+};
+
+static const u16 micro_keycodes[] = {
+	KEY_RECORD,		/* 1:  Record button			*/
+	KEY_CALENDAR,		/* 2:  Calendar				*/
+	KEY_ADDRESSBOOK,	/* 3:  Contacts (looks like Outlook)	*/
+	KEY_MAIL,		/* 4:  Envelope (Q on older iPAQs)	*/
+	KEY_HOMEPAGE,		/* 5:  Start (looks like swoopy arrow)	*/
+	KEY_UP,			/* 6:  Up				*/
+	KEY_RIGHT,		/* 7:  Right				*/
+	KEY_LEFT,		/* 8:  Left				*/
+	KEY_DOWN,		/* 9:  Down				*/
+};
+
+static void micro_key_receive(void *data, int len, unsigned char *msg)
+{
+	struct ipaq_micro_keys *keys = data;
+	int key, down;
+
+	down = 0x80 & msg[0];
+	key  = 0x7f & msg[0];
+
+	if (key < ARRAY_SIZE(micro_keycodes)) {
+		input_report_key(keys->input, keys->codes[key], down);
+		input_sync(keys->input);
+	}
+}
+
+static void micro_key_start(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = micro_key_receive;
+	keys->micro->key_data = keys;
+	spin_unlock(&keys->micro->lock);
+}
+
+static void micro_key_stop(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = NULL;
+	keys->micro->key_data = NULL;
+	spin_unlock(&keys->micro->lock);
+}
+
+static int micro_key_open(struct input_dev *input)
+{
+	struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+	micro_key_start(keys);
+
+	return 0;
+}
+
+static void micro_key_close(struct input_dev *input)
+{
+	struct ipaq_micro_keys *keys = input_get_drvdata(input);
+
+	micro_key_stop(keys);
+}
+
+static int micro_key_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro_keys *keys;
+	int error;
+	int i;
+
+	keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+	if (!keys)
+		return -ENOMEM;
+
+	keys->micro = dev_get_drvdata(pdev->dev.parent);
+
+	keys->input = devm_input_allocate_device(&pdev->dev);
+	if (!keys->input)
+		return -ENOMEM;
+
+	keys->input->keycodesize = sizeof(micro_keycodes[0]);
+	keys->input->keycodemax = ARRAY_SIZE(micro_keycodes);
+	keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes,
+			   keys->input->keycodesize * keys->input->keycodemax,
+			   GFP_KERNEL);
+	keys->input->keycode = keys->codes;
+
+	__set_bit(EV_KEY, keys->input->evbit);
+	for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++)
+		__set_bit(micro_keycodes[i], keys->input->keybit);
+
+	keys->input->name = "h3600 micro keys";
+	keys->input->open = micro_key_open;
+	keys->input->close = micro_key_close;
+	input_set_drvdata(keys->input, keys);
+
+	error = input_register_device(keys->input);
+	if (error)
+		return error;
+
+	platform_set_drvdata(pdev, keys);
+	return 0;
+}
+
+static int __maybe_unused micro_key_suspend(struct device *dev)
+{
+	struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+
+	micro_key_stop(keys);
+
+	return 0;
+}
+
+static int __maybe_unused micro_key_resume(struct device *dev)
+{
+	struct ipaq_micro_keys *keys = dev_get_drvdata(dev);
+	struct input_dev *input = keys->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users)
+		micro_key_start(keys);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops,
+			 micro_key_suspend, micro_key_resume);
+
+static struct platform_driver micro_key_device_driver = {
+	.driver = {
+		.name    = "ipaq-micro-keys",
+		.pm	= &micro_key_dev_pm_ops,
+	},
+	.probe   = micro_key_probe,
+};
+module_platform_driver(micro_key_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys");
+MODULE_ALIAS("platform:ipaq-micro-keys");

drivers/input/keyboard/tc3589x-keypad.c

@@ -69,6 +69,28 @@
 #define TC3589x_EVT_INT_CLR	0x2
 #define TC3589x_KBD_INT_CLR	0x1
 
+/**
+ * struct tc35893_keypad_platform_data - platform specific keypad data
+ * @keymap_data:        matrix scan code table for keycodes
+ * @krow:               mask for available rows, value is 0xFF
+ * @kcol:               mask for available columns, value is 0xFF
+ * @debounce_period:    platform specific debounce time
+ * @settle_time:        platform specific settle down time
+ * @irqtype:            type of interrupt, falling or rising edge
+ * @enable_wakeup:      specifies if keypad event can wake up system from sleep
+ * @no_autorepeat:      flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	u8                      krow;
+	u8                      kcol;
+	u8                      debounce_period;
+	u8                      settle_time;
+	unsigned long           irqtype;
+	bool                    enable_wakeup;
+	bool                    no_autorepeat;
+};
+
 /**
  * struct tc_keypad - data structure used by keypad driver
  * @tc3589x:    pointer to tc35893
@@ -354,13 +376,10 @@ static int tc3589x_keypad_probe(struct platform_device *pdev)
 	const struct tc3589x_keypad_platform_data *plat;
 	int error, irq;
 
-	plat = tc3589x->pdata->keypad;
-	if (!plat) {
-		plat = tc3589x_keypad_of_probe(&pdev->dev);
-		if (IS_ERR(plat)) {
-			dev_err(&pdev->dev, "invalid keypad platform data\n");
-			return PTR_ERR(plat);
-		}
+	plat = tc3589x_keypad_of_probe(&pdev->dev);
+	if (IS_ERR(plat)) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return PTR_ERR(plat);
 	}
 
 	irq = platform_get_irq(pdev, 0);

drivers/input/misc/Kconfig

@@ -115,6 +115,18 @@ config INPUT_PCSPKR
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcspkr.
 
+config INPUT_PM8941_PWRKEY
+	tristate "Qualcomm PM8941 power key support"
+	depends on MFD_SPMI_PMIC
+	help
+	  Say Y here if you want support for the power key usually found
+	  on boards using a Qualcomm PM8941 compatible PMIC.
+
+	  If unsure, say Y.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pm8941-pwrkey.
+
 config INPUT_PM8XXX_VIBRATOR
 	tristate "Qualcomm PM8XXX vibrator support"
 	depends on MFD_PM8XXX
@@ -165,6 +177,18 @@ config INPUT_MAX77693_HAPTIC
 	  To compile this driver as module, choose M here: the
 	  module will be called max77693-haptic.
 
+config INPUT_MAX77843_HAPTIC
+    tristate "MAXIM MAX77843 haptic controller support"
+    depends on MFD_MAX77843 && REGULATOR
+    select INPUT_FF_MEMLESS
+    help
+      This option enables support for the haptic controller on
+      MAXIM MAX77843 chip. The driver supports ff-memless interface
+      from input framework.
+
+      To compile this driver as module, choose M here: the
+      module will be called max77843-haptic.
+
 config INPUT_MAX8925_ONKEY
 	tristate "MAX8925 ONKEY support"
 	depends on MFD_MAX8925

drivers/input/misc/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
+obj-$(CONFIG_INPUT_MAX77843_HAPTIC)	+= max77843-haptic.o
 obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
@@ -49,6 +50,7 @@ obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
 obj-$(CONFIG_INPUT_PCF8574)		+= pcf8574_keypad.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
+obj-$(CONFIG_INPUT_PM8941_PWRKEY)	+= pm8941-pwrkey.o
 obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR)	+= pm8xxx-vibrator.o
 obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)	+= pmic8xxx-pwrkey.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o

drivers/input/misc/max77843-haptic.c

+/*
+ * MAXIM MAX77693 Haptic device driver
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/mfd/max77843-private.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#define MAX_MAGNITUDE_SHIFT        16
+
+enum max77843_haptic_motor_type {
+	MAX77843_HAPTIC_ERM = 0,
+	MAX77843_HAPTIC_LRA,
+};
+
+enum max77843_haptic_pwm_divisor {
+	MAX77843_HAPTIC_PWM_DIVISOR_32 = 0,
+	MAX77843_HAPTIC_PWM_DIVISOR_64,
+	MAX77843_HAPTIC_PWM_DIVISOR_128,
+	MAX77843_HAPTIC_PWM_DIVISOR_256,
+};
+
+struct max77843_haptic {
+	struct regmap *regmap_haptic;
+	struct device *dev;
+	struct input_dev *input_dev;
+	struct pwm_device *pwm_dev;
+	struct regulator *motor_reg;
+	struct work_struct work;
+	struct mutex mutex;
+
+	unsigned int magnitude;
+	unsigned int pwm_duty;
+
+	bool active;
+	bool suspended;
+
+	enum max77843_haptic_motor_type type;
+	enum max77843_haptic_pwm_divisor pwm_divisor;
+};
+
+static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic)
+{
+	int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2;
+	int error;
+
+	error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period);
+	if (error) {
+		dev_err(haptic->dev, "failed to configure pwm: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on)
+{
+	int error;
+
+	error = regmap_update_bits(haptic->regmap_haptic,
+				   MAX77843_SYS_REG_MAINCTRL1,
+				   MAX77843_MAINCTRL1_BIASEN_MASK,
+				   on << MAINCTRL1_BIASEN_SHIFT);
+	if (error) {
+		dev_err(haptic->dev, "failed to %s bias: %d\n",
+			on ? "enable" : "disable", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable)
+{
+	unsigned int value;
+	int error;
+
+	value = (haptic->type << MCONFIG_MODE_SHIFT) |
+		(enable << MCONFIG_MEN_SHIFT) |
+		(haptic->pwm_divisor << MCONFIG_PDIV_SHIFT);
+
+	error = regmap_write(haptic->regmap_haptic,
+			     MAX77843_HAP_REG_MCONFIG, value);
+	if (error) {
+		dev_err(haptic->dev,
+			"failed to update haptic config: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int max77843_haptic_enable(struct max77843_haptic *haptic)
+{
+	int error;
+
+	if (haptic->active)
+		return 0;
+
+	error = pwm_enable(haptic->pwm_dev);
+	if (error) {
+		dev_err(haptic->dev,
+			"failed to enable pwm device: %d\n", error);
+		return error;
+	}
+
+	error = max77843_haptic_config(haptic, true);
+	if (error)
+		goto err_config;
+
+	haptic->active = true;
+
+	return 0;
+
+err_config:
+	pwm_disable(haptic->pwm_dev);
+
+	return error;
+}
+
+static int max77843_haptic_disable(struct max77843_haptic *haptic)
+{
+	int error;
+
+	if (!haptic->active)
+		return 0;
+
+	error = max77843_haptic_config(haptic, false);
+	if (error)
+		return error;
+
+	pwm_disable(haptic->pwm_dev);
+
+	haptic->active = false;
+
+	return 0;
+}
+
+static void max77843_haptic_play_work(struct work_struct *work)
+{
+	struct max77843_haptic *haptic =
+			container_of(work, struct max77843_haptic, work);
+	int error;
+
+	mutex_lock(&haptic->mutex);
+
+	if (haptic->suspended)
+		goto out_unlock;
+
+	if (haptic->magnitude) {
+		error = max77843_haptic_set_duty_cycle(haptic);
+		if (error) {
+			dev_err(haptic->dev,
+				"failed to set duty cycle: %d\n", error);
+			goto out_unlock;
+		}
+
+		error = max77843_haptic_enable(haptic);
+		if (error)
+			dev_err(haptic->dev,
+				"cannot enable haptic: %d\n", error);
+	} else {
+		error = max77843_haptic_disable(haptic);
+		if (error)
+			dev_err(haptic->dev,
+				"cannot disable haptic: %d\n", error);
+	}
+
+out_unlock:
+	mutex_unlock(&haptic->mutex);
+}
+
+static int max77843_haptic_play_effect(struct input_dev *dev, void *data,
+		struct ff_effect *effect)
+{
+	struct max77843_haptic *haptic = input_get_drvdata(dev);
+	u64 period_mag_multi;
+
+	haptic->magnitude = effect->u.rumble.strong_magnitude;
+	if (!haptic->magnitude)
+		haptic->magnitude = effect->u.rumble.weak_magnitude;
+
+	period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
+	haptic->pwm_duty = (unsigned int)(period_mag_multi >>
+						MAX_MAGNITUDE_SHIFT);
+
+	schedule_work(&haptic->work);
+
+	return 0;
+}
+
+static int max77843_haptic_open(struct input_dev *dev)
+{
+	struct max77843_haptic *haptic = input_get_drvdata(dev);
+	int error;
+
+	error = max77843_haptic_bias(haptic, true);
+	if (error)
+		return error;
+
+	error = regulator_enable(haptic->motor_reg);
+	if (error) {
+		dev_err(haptic->dev,
+			"failed to enable regulator: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void max77843_haptic_close(struct input_dev *dev)
+{
+	struct max77843_haptic *haptic = input_get_drvdata(dev);
+	int error;
+
+	cancel_work_sync(&haptic->work);
+	max77843_haptic_disable(haptic);
+
+	error = regulator_disable(haptic->motor_reg);
+	if (error)
+		dev_err(haptic->dev,
+			"failed to disable regulator: %d\n", error);
+
+	max77843_haptic_bias(haptic, false);
+}
+
+static int max77843_haptic_probe(struct platform_device *pdev)
+{
+	struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent);
+	struct max77843_haptic *haptic;
+	int error;
+
+	haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL);
+	if (!haptic)
+		return -ENOMEM;
+
+	haptic->regmap_haptic = max77843->regmap;
+	haptic->dev = &pdev->dev;
+	haptic->type = MAX77843_HAPTIC_LRA;
+	haptic->pwm_divisor = MAX77843_HAPTIC_PWM_DIVISOR_128;
+
+	INIT_WORK(&haptic->work, max77843_haptic_play_work);
+	mutex_init(&haptic->mutex);
+
+	haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL);
+	if (IS_ERR(haptic->pwm_dev)) {
+		dev_err(&pdev->dev, "failed to get pwm device\n");
+		return PTR_ERR(haptic->pwm_dev);
+	}
+
+	haptic->motor_reg = devm_regulator_get_exclusive(&pdev->dev, "haptic");
+	if (IS_ERR(haptic->motor_reg)) {
+		dev_err(&pdev->dev, "failed to get regulator\n");
+		return PTR_ERR(haptic->motor_reg);
+	}
+
+	haptic->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!haptic->input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	haptic->input_dev->name = "max77843-haptic";
+	haptic->input_dev->id.version = 1;
+	haptic->input_dev->dev.parent = &pdev->dev;
+	haptic->input_dev->open = max77843_haptic_open;
+	haptic->input_dev->close = max77843_haptic_close;
+	input_set_drvdata(haptic->input_dev, haptic);
+	input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE);
+
+	error = input_ff_create_memless(haptic->input_dev, NULL,
+			max77843_haptic_play_effect);
+	if (error) {
+		dev_err(&pdev->dev, "failed to create force-feedback\n");
+		return error;
+	}
+
+	error = input_register_device(haptic->input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, haptic);
+
+	return 0;
+}
+
+static int __maybe_unused max77843_haptic_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct max77843_haptic *haptic = platform_get_drvdata(pdev);
+	int error;
+
+	error = mutex_lock_interruptible(&haptic->mutex);
+	if (error)
+		return error;
+
+	max77843_haptic_disable(haptic);
+
+	haptic->suspended = true;
+
+	mutex_unlock(&haptic->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused max77843_haptic_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct max77843_haptic *haptic = platform_get_drvdata(pdev);
+	unsigned int magnitude;
+
+	mutex_lock(&haptic->mutex);
+
+	haptic->suspended = false;
+
+	magnitude = ACCESS_ONCE(haptic->magnitude);
+	if (magnitude)
+		max77843_haptic_enable(haptic);
+
+	mutex_unlock(&haptic->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max77843_haptic_pm_ops,
+		max77843_haptic_suspend, max77843_haptic_resume);
+
+static struct platform_driver max77843_haptic_driver = {
+	.driver		= {
+		.name	= "max77843-haptic",
+		.pm	= &max77843_haptic_pm_ops,
+	},
+	.probe		= max77843_haptic_probe,
+};
+module_platform_driver(max77843_haptic_driver);
+
+MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
+MODULE_DESCRIPTION("MAXIM MAX77843 Haptic driver");
+MODULE_LICENSE("GPL");

drivers/input/misc/mma8450.c

@@ -174,12 +174,13 @@ static int mma8450_probe(struct i2c_client *c,
 	struct mma8450 *m;
 	int err;
 
-	m = kzalloc(sizeof(struct mma8450), GFP_KERNEL);
-	idev = input_allocate_polled_device();
-	if (!m || !idev) {
-		err = -ENOMEM;
-		goto err_free_mem;
-	}
+	m = devm_kzalloc(&c->dev, sizeof(*m), GFP_KERNEL);
+	if (!m)
+		return -ENOMEM;
+
+	idev = devm_input_allocate_polled_device(&c->dev);
+	if (!idev)
+		return -ENOMEM;
 
 	m->client = c;
 	m->idev = idev;
@@ -187,7 +188,6 @@ static int mma8450_probe(struct i2c_client *c,
 	idev->private		= m;
 	idev->input->name	= MMA8450_DRV_NAME;
 	idev->input->id.bustype	= BUS_I2C;
-	idev->input->dev.parent = &c->dev;
 	idev->poll		= mma8450_poll;
 	idev->poll_interval	= POLL_INTERVAL;
 	idev->poll_interval_max	= POLL_INTERVAL_MAX;
@@ -202,28 +202,11 @@ static int mma8450_probe(struct i2c_client *c,
 	err = input_register_polled_device(idev);
 	if (err) {
 		dev_err(&c->dev, "failed to register polled input device\n");
-		goto err_free_mem;
+		return err;
 	}
 
 	i2c_set_clientdata(c, m);
 
-	return 0;
-
-err_free_mem:
-	input_free_polled_device(idev);
-	kfree(m);
-	return err;
-}
-
-static int mma8450_remove(struct i2c_client *c)
-{
-	struct mma8450 *m = i2c_get_clientdata(c);
-	struct input_polled_dev *idev = m->idev;
-
-	input_unregister_polled_device(idev);
-	input_free_polled_device(idev);
-	kfree(m);
-
 	return 0;
 }
 
@@ -242,11 +225,9 @@ MODULE_DEVICE_TABLE(of, mma8450_dt_ids);
 static struct i2c_driver mma8450_driver = {
 	.driver = {
 		.name	= MMA8450_DRV_NAME,
-		.owner	= THIS_MODULE,
 		.of_match_table = mma8450_dt_ids,
 	},
 	.probe		= mma8450_probe,
-	.remove		= mma8450_remove,
 	.id_table	= mma8450_id,
 };
 

drivers/input/misc/palmas-pwrbutton.c

@@ -304,7 +304,7 @@ static SIMPLE_DEV_PM_OPS(palmas_pwron_pm,
 			 palmas_pwron_suspend, palmas_pwron_resume);
 
 #ifdef CONFIG_OF
-static struct of_device_id of_palmas_pwr_match[] = {
+static const struct of_device_id of_palmas_pwr_match[] = {
 	{ .compatible = "ti,palmas-pwrbutton" },
 	{ },
 };

drivers/input/misc/pm8941-pwrkey.c

+/*
+ * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014, Sony Mobile Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define PON_REV2			0x01
+
+#define PON_RT_STS			0x10
+#define  PON_KPDPWR_N_SET		BIT(0)
+
+#define PON_PS_HOLD_RST_CTL		0x5a
+#define PON_PS_HOLD_RST_CTL2		0x5b
+#define  PON_PS_HOLD_ENABLE		BIT(7)
+#define  PON_PS_HOLD_TYPE_MASK		0x0f
+#define  PON_PS_HOLD_TYPE_SHUTDOWN	4
+#define  PON_PS_HOLD_TYPE_HARD_RESET	7
+
+#define PON_PULL_CTL			0x70
+#define  PON_KPDPWR_PULL_UP		BIT(1)
+
+#define PON_DBC_CTL			0x71
+#define  PON_DBC_DELAY_MASK		0x7
+
+
+struct pm8941_pwrkey {
+	struct device *dev;
+	int irq;
+	u32 baseaddr;
+	struct regmap *regmap;
+	struct input_dev *input;
+
+	unsigned int revision;
+	struct notifier_block reboot_notifier;
+};
+
+static int pm8941_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey,
+						    reboot_notifier);
+	unsigned int enable_reg;
+	unsigned int reset_type;
+	int error;
+
+	/* PMICs with revision 0 have the enable bit in same register as ctrl */
+	if (pwrkey->revision == 0)
+		enable_reg = PON_PS_HOLD_RST_CTL;
+	else
+		enable_reg = PON_PS_HOLD_RST_CTL2;
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   0);
+	if (error)
+		dev_err(pwrkey->dev,
+			"unable to clear ps hold reset enable: %d\n",
+			error);
+
+	/*
+	 * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between
+	 * writes.
+	 */
+	usleep_range(100, 1000);
+
+	switch (code) {
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		reset_type = PON_PS_HOLD_TYPE_SHUTDOWN;
+		break;
+	case SYS_RESTART:
+	default:
+		reset_type = PON_PS_HOLD_TYPE_HARD_RESET;
+		break;
+	};
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_PS_HOLD_RST_CTL,
+				   PON_PS_HOLD_TYPE_MASK,
+				   reset_type);
+	if (error)
+		dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n",
+			error);
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + enable_reg,
+				   PON_PS_HOLD_ENABLE,
+				   PON_PS_HOLD_ENABLE);
+	if (error)
+		dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error);
+
+	return NOTIFY_DONE;
+}
+
+static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data)
+{
+	struct pm8941_pwrkey *pwrkey = _data;
+	unsigned int sts;
+	int error;
+
+	error = regmap_read(pwrkey->regmap,
+			    pwrkey->baseaddr + PON_RT_STS, &sts);
+	if (error)
+		return IRQ_HANDLED;
+
+	input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET));
+	input_sync(pwrkey->input);
+
+	return IRQ_HANDLED;
+}
+
+static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static int __maybe_unused pm8941_pwrkey_resume(struct device *dev)
+{
+	struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(pwrkey->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops,
+			 pm8941_pwrkey_suspend, pm8941_pwrkey_resume);
+
+static int pm8941_pwrkey_probe(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey;
+	bool pull_up;
+	u32 req_delay;
+	int error;
+
+	if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay))
+		req_delay = 15625;
+
+	if (req_delay > 2000000 || req_delay == 0) {
+		dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay);
+		return -EINVAL;
+	}
+
+	pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up");
+
+	pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL);
+	if (!pwrkey)
+		return -ENOMEM;
+
+	pwrkey->dev = &pdev->dev;
+
+	pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pwrkey->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	pwrkey->irq = platform_get_irq(pdev, 0);
+	if (pwrkey->irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return pwrkey->irq;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "reg",
+				     &pwrkey->baseaddr);
+	if (error)
+		return error;
+
+	error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2,
+			    &pwrkey->revision);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
+		return error;
+	}
+
+	pwrkey->input = devm_input_allocate_device(&pdev->dev);
+	if (!pwrkey->input) {
+		dev_dbg(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_capability(pwrkey->input, EV_KEY, KEY_POWER);
+
+	pwrkey->input->name = "pm8941_pwrkey";
+	pwrkey->input->phys = "pm8941_pwrkey/input0";
+
+	req_delay = (req_delay << 6) / USEC_PER_SEC;
+	req_delay = ilog2(req_delay);
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_DBC_CTL,
+				   PON_DBC_DELAY_MASK,
+				   req_delay);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
+		return error;
+	}
+
+	error = regmap_update_bits(pwrkey->regmap,
+				   pwrkey->baseaddr + PON_PULL_CTL,
+				   PON_KPDPWR_PULL_UP,
+				   pull_up ? PON_KPDPWR_PULL_UP : 0);
+	if (error) {
+		dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
+					  NULL, pm8941_pwrkey_irq,
+					  IRQF_ONESHOT,
+					  "pm8941_pwrkey", pwrkey);
+	if (error) {
+		dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(pwrkey->input);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device: %d\n",
+			error);
+		return error;
+	}
+
+	pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
+	error = register_reboot_notifier(&pwrkey->reboot_notifier);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
+			error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pwrkey);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int pm8941_pwrkey_remove(struct platform_device *pdev)
+{
+	struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	unregister_reboot_notifier(&pwrkey->reboot_notifier);
+
+	return 0;
+}
+
+static const struct of_device_id pm8941_pwr_key_id_table[] = {
+	{ .compatible = "qcom,pm8941-pwrkey" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
+
+static struct platform_driver pm8941_pwrkey_driver = {
+	.probe = pm8941_pwrkey_probe,
+	.remove = pm8941_pwrkey_remove,
+	.driver = {
+		.name = "pm8941-pwrkey",
+		.pm = &pm8941_pwr_key_pm_ops,
+		.of_match_table = of_match_ptr(pm8941_pwr_key_id_table),
+	},
+};
+module_platform_driver(pm8941_pwrkey_driver);
+
+MODULE_DESCRIPTION("PM8941 Power Key driver");
+MODULE_LICENSE("GPL v2");

drivers/input/misc/pwm-beeper.c

@@ -50,7 +50,6 @@ static int pwm_beeper_event(struct input_dev *input,
 	}
 
 	if (value == 0) {
-		pwm_config(beeper->pwm, 0, 0);
 		pwm_disable(beeper->pwm);
 	} else {
 		period = HZ_TO_NANOSECONDS(value);
@@ -169,12 +168,6 @@ static int __maybe_unused pwm_beeper_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
 			 pwm_beeper_suspend, pwm_beeper_resume);
 
-#ifdef CONFIG_PM_SLEEP
-#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops)
-#else
-#define PWM_BEEPER_PM_OPS NULL
-#endif
-
 #ifdef CONFIG_OF
 static const struct of_device_id pwm_beeper_match[] = {
 	{ .compatible = "pwm-beeper", },
@@ -187,7 +180,7 @@ static struct platform_driver pwm_beeper_driver = {
 	.remove = pwm_beeper_remove,
 	.driver = {
 		.name	= "pwm-beeper",
-		.pm	= PWM_BEEPER_PM_OPS,
+		.pm	= &pwm_beeper_pm_ops,
 		.of_match_table = of_match_ptr(pwm_beeper_match),
 	},
 };

drivers/input/misc/regulator-haptic.c

@@ -245,7 +245,7 @@ static int __maybe_unused regulator_haptic_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(regulator_haptic_pm_ops,
 		regulator_haptic_suspend, regulator_haptic_resume);
 
-static struct of_device_id regulator_haptic_dt_match[] = {
+static const struct of_device_id regulator_haptic_dt_match[] = {
 	{ .compatible = "regulator-haptic" },
 	{ /* sentinel */ },
 };

drivers/input/misc/tps65218-pwrbutton.c

@@ -106,7 +106,7 @@ static int tps65218_pwron_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id of_tps65218_pwr_match[] = {
+static const struct of_device_id of_tps65218_pwr_match[] = {
 	{ .compatible = "ti,tps65218-pwrbutton" },
 	{ },
 };

drivers/input/mouse/alps.h

@@ -22,13 +22,89 @@
 #define ALPS_PROTO_V5		0x500
 #define ALPS_PROTO_V6		0x600
 #define ALPS_PROTO_V7		0x700	/* t3btl t4s */
+#define ALPS_PROTO_V8		0x800	/* SS4btl SS4s */
 
-#define MAX_TOUCHES	2
+#define MAX_TOUCHES	4
 
 #define DOLPHIN_COUNT_PER_ELECTRODE	64
 #define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */
 #define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */
 
+/*
+ * enum SS4_PACKET_ID - defines the packet type for V8
+ * SS4_PACKET_ID_IDLE: There's no finger and no button activity.
+ * SS4_PACKET_ID_ONE: There's one finger on touchpad
+ *  or there's button activities.
+ * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad
+ * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad
+*/
+enum SS4_PACKET_ID {
+	SS4_PACKET_ID_IDLE = 0,
+	SS4_PACKET_ID_ONE,
+	SS4_PACKET_ID_TWO,
+	SS4_PACKET_ID_MULTI,
+};
+
+#define SS4_COUNT_PER_ELECTRODE		256
+#define SS4_NUMSENSOR_XOFFSET		7
+#define SS4_NUMSENSOR_YOFFSET		7
+#define SS4_MIN_PITCH_MM		50
+
+#define SS4_MASK_NORMAL_BUTTONS		0x07
+
+#define SS4_1F_X_V2(_b)		((_b[0] & 0x0007) |		\
+				 ((_b[1] << 3) & 0x0078) |	\
+				 ((_b[1] << 2) & 0x0380) |	\
+				 ((_b[2] << 5) & 0x1C00)	\
+				)
+
+#define SS4_1F_Y_V2(_b)		(((_b[2]) & 0x000F) |		\
+				 ((_b[3] >> 2) & 0x0030) |	\
+				 ((_b[4] << 6) & 0x03C0) |	\
+				 ((_b[4] << 5) & 0x0C00)	\
+				)
+
+#define SS4_1F_Z_V2(_b)		(((_b[5]) & 0x0F) |		\
+				 ((_b[5] >> 1) & 0x70) |	\
+				 ((_b[4]) & 0x80)		\
+				)
+
+#define SS4_1F_LFB_V2(_b)	(((_b[2] >> 4) & 0x01) == 0x01)
+
+#define SS4_MF_LF_V2(_b, _i)	((_b[1 + (_i) * 3] & 0x0004) == 0x0004)
+
+#define SS4_BTN_V2(_b)		((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS)
+
+#define SS4_STD_MF_X_V2(_b, _i)	(((_b[0 + (_i) * 3] << 5) & 0x00E0) |	\
+				 ((_b[1 + _i * 3]  << 5) & 0x1F00)	\
+				)
+
+#define SS4_STD_MF_Y_V2(_b, _i)	(((_b[1 + (_i) * 3] << 3) & 0x0010) |	\
+				 ((_b[2 + (_i) * 3] << 5) & 0x01E0) |	\
+				 ((_b[2 + (_i) * 3] << 4) & 0x0E00)	\
+				)
+
+#define SS4_BTL_MF_X_V2(_b, _i)	(SS4_STD_MF_X_V2(_b, _i) |		\
+				 ((_b[0 + (_i) * 3] >> 3) & 0x0010)	\
+				)
+
+#define SS4_BTL_MF_Y_V2(_b, _i)	(SS4_STD_MF_Y_V2(_b, _i) | \
+				 ((_b[0 + (_i) * 3] >> 3) & 0x0008)	\
+				)
+
+#define SS4_MF_Z_V2(_b, _i)	(((_b[1 + (_i) * 3]) & 0x0001) |	\
+				 ((_b[1 + (_i) * 3] >> 1) & 0x0002)	\
+				)
+
+#define SS4_IS_MF_CONTINUE(_b)	((_b[2] & 0x10) == 0x10)
+#define SS4_IS_5F_DETECTED(_b)	((_b[2] & 0x10) == 0x10)
+
+
+#define SS4_MFPACKET_NO_AX	8160	/* X-Coordinate value */
+#define SS4_MFPACKET_NO_AY	4080	/* Y-Coordinate value */
+#define SS4_MFPACKET_NO_AX_BL	8176	/* Buttonless X-Coordinate value */
+#define SS4_MFPACKET_NO_AY_BL	4088	/* Buttonless Y-Coordinate value */
+
 /*
  * enum V7_PACKET_ID - defines the packet type for V7
  * V7_PACKET_ID_IDLE: There's no finger and no button activity.

drivers/input/mouse/elan_i2c.h

@@ -17,7 +17,7 @@
  */
 
 #ifndef _ELAN_I2C_H
-#define _ELAN_i2C_H
+#define _ELAN_I2C_H
 
 #include <linux/types.h>
 

drivers/input/mouse/elan_i2c_core.c

@@ -99,7 +99,7 @@ static int elan_enable_power(struct elan_tp_data *data)
 	error = regulator_enable(data->vcc);
 	if (error) {
 		dev_err(&data->client->dev,
-			"Failed to enable regulator: %d\n", error);
+			"failed to enable regulator: %d\n", error);
 		return error;
 	}
 
@@ -111,6 +111,7 @@ static int elan_enable_power(struct elan_tp_data *data)
 		msleep(30);
 	} while (--repeat > 0);
 
+	dev_err(&data->client->dev, "failed to enable power: %d\n", error);
 	return error;
 }
 
@@ -125,7 +126,7 @@ static int elan_disable_power(struct elan_tp_data *data)
 			error = regulator_disable(data->vcc);
 			if (error) {
 				dev_err(&data->client->dev,
-					"Failed to disable regulator: %d\n",
+					"failed to disable regulator: %d\n",
 					error);
 				/* Attempt to power the chip back up */
 				data->ops->power_control(data->client, true);
@@ -138,6 +139,7 @@ static int elan_disable_power(struct elan_tp_data *data)
 		msleep(30);
 	} while (--repeat > 0);
 
+	dev_err(&data->client->dev, "failed to disable power: %d\n", error);
 	return error;
 }
 
@@ -196,7 +198,6 @@ static int elan_initialize(struct elan_tp_data *data)
 		if (!error)
 			return 0;
 
-		repeat--;
 		msleep(30);
 	} while (--repeat > 0);
 
@@ -1084,16 +1085,18 @@ static int __maybe_unused elan_resume(struct device *dev)
 	}
 
 	error = elan_enable_power(data);
-	if (error)
+	if (error) {
 		dev_err(dev, "power up when resuming failed: %d\n", error);
+		goto err;
+	}
 
 	error = elan_initialize(data);
 	if (error)
 		dev_err(dev, "initialize when resuming failed: %d\n", error);
 
+err:
 	enable_irq(data->client->irq);
-
-	return 0;
+	return error;
 }
 
 static SIMPLE_DEV_PM_OPS(elan_pm_ops, elan_suspend, elan_resume);

drivers/input/mouse/elan_i2c_i2c.c

@@ -117,7 +117,15 @@ static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd)
 	int ret;
 
 	ret = i2c_transfer(client->adapter, &msg, 1);
-	return ret == 1 ? 0 : (ret < 0 ? ret : -EIO);
+	if (ret != 1) {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n",
+			reg, ret);
+		return ret;
+	}
+
+	return 0;
 }
 
 static int elan_i2c_initialize(struct i2c_client *client)

drivers/input/mouse/elantech.c

@@ -892,6 +892,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse)
 	return PSMOUSE_FULL_PACKET;
 }
 
+/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+		unsigned int rate)
+{
+	struct elantech_data *etd = psmouse->private;
+
+	etd->original_set_rate(psmouse, rate);
+	if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+		psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
 /*
  * Put the touchpad into absolute mode
  */
@@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
  * Asus K53SV              0x450f01        78, 15, 0c      2 hw buttons
  * Asus G46VW              0x460f02        00, 18, 0c      2 hw buttons
  * Asus G750JX             0x360f00        00, 16, 0c      2 hw buttons
+ * Asus TP500LN            0x381f17        10, 14, 0e      clickpad
+ * Asus X750JN             0x381f17        10, 14, 0e      clickpad
  * Asus UX31               0x361f00        20, 15, 0e      clickpad
  * Asus UX32VD             0x361f02        00, 15, 0e      clickpad
  * Avatar AVIU-145A2       0x361f00        ?               clickpad
@@ -1635,6 +1652,11 @@ int elantech_init(struct psmouse *psmouse)
 		goto init_fail;
 	}
 
+	if (etd->fw_version == 0x381f17) {
+		etd->original_set_rate = psmouse->set_rate;
+		psmouse->set_rate = elantech_set_rate_restore_reg_07;
+	}
+
 	if (elantech_set_input_params(psmouse)) {
 		psmouse_err(psmouse, "failed to query touchpad range.\n");
 		goto init_fail;

drivers/input/mouse/elantech.h

@@ -142,6 +142,7 @@ struct elantech_data {
 	struct finger_pos mt[ETP_MAX_FINGERS];
 	unsigned char parity[256];
 	int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+	void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
 };
 
 #ifdef CONFIG_MOUSE_PS2_ELANTECH

drivers/input/mouse/lifebook.c

@@ -256,8 +256,8 @@ static void lifebook_disconnect(struct psmouse *psmouse)
 
 int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 {
-        if (!lifebook_present)
-                return -1;
+	if (!lifebook_present)
+		return -1;
 
 	if (desired_serio_phys &&
 	    strcmp(psmouse->ps2dev.serio->phys, desired_serio_phys))
@@ -268,7 +268,7 @@ int lifebook_detect(struct psmouse *psmouse, bool set_properties)
 		psmouse->name = "Lifebook TouchScreen";
 	}
 
-        return 0;
+	return 0;
 }
 
 static int lifebook_create_relative_device(struct psmouse *psmouse)

drivers/input/mouse/psmouse-base.c

@@ -474,19 +474,45 @@ static int psmouse_poll(struct psmouse *psmouse)
 			   PSMOUSE_CMD_POLL | (psmouse->pktsize << 8));
 }
 
+static bool psmouse_check_pnp_id(const char *id, const char * const ids[])
+{
+	int i;
+
+	for (i = 0; ids[i]; i++)
+		if (!strcasecmp(id, ids[i]))
+			return true;
+
+	return false;
+}
+
 /*
  * psmouse_matches_pnp_id - check if psmouse matches one of the passed in ids.
  */
 bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[])
 {
-	int i;
-
-	if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4))
-		for (i = 0; ids[i]; i++)
-			if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i]))
-				return true;
+	struct serio *serio = psmouse->ps2dev.serio;
+	char *p, *fw_id_copy, *save_ptr;
+	bool found = false;
+
+	if (strncmp(serio->firmware_id, "PNP: ", 5))
+		return false;
+
+	fw_id_copy = kstrndup(&serio->firmware_id[5],
+			      sizeof(serio->firmware_id) - 5,
+			      GFP_KERNEL);
+	if (!fw_id_copy)
+		return false;
+
+	save_ptr = fw_id_copy;
+	while ((p = strsep(&fw_id_copy, " ")) != NULL) {
+		if (psmouse_check_pnp_id(p, ids)) {
+			found = true;
+			break;
+		}
+	}
 
-	return false;
+	kfree(save_ptr);
+	return found;
 }
 
 /*

drivers/input/mouse/synaptics.c

@@ -67,6 +67,9 @@
 #define X_MAX_POSITIVE 8176
 #define Y_MAX_POSITIVE 8176
 
+/* maximum ABS_MT_POSITION displacement (in mm) */
+#define DMAX 10
+
 /*****************************************************************************
  *	Stuff we need even when we do not want native Synaptics support
  ****************************************************************************/
@@ -203,6 +206,13 @@ static const char * const topbuttonpad_pnp_ids[] = {
 	NULL
 };
 
+/* This list has been kindly provided by Synaptics. */
+static const char * const forcepad_pnp_ids[] = {
+	"SYN300D",
+	"SYN3014",
+	NULL
+};
+
 /*****************************************************************************
  *	Synaptics communications functions
  ****************************************************************************/
@@ -687,8 +697,6 @@ static void synaptics_parse_ext_buttons(const unsigned char buf[],
 	hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits;
 }
 
-static bool is_forcepad;
-
 static int synaptics_parse_hw_state(const unsigned char buf[],
 				    struct synaptics_data *priv,
 				    struct synaptics_hw_state *hw)
@@ -718,7 +726,7 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-		if (is_forcepad) {
+		if (priv->is_forcepad) {
 			/*
 			 * ForcePads, like Clickpads, use middle button
 			 * bits to report primary button clicks.
@@ -917,7 +925,7 @@ static void synaptics_report_mt_data(struct psmouse *psmouse,
 		pos[i].y = synaptics_invert_y(hw[i]->y);
 	}
 
-	input_mt_assign_slots(dev, slot, pos, nsemi, 0);
+	input_mt_assign_slots(dev, slot, pos, nsemi, DMAX * priv->x_res);
 
 	for (i = 0; i < nsemi; i++) {
 		input_mt_slot(dev, slot[i]);
@@ -1186,7 +1194,7 @@ static void set_input_params(struct psmouse *psmouse,
 					ABS_MT_POSITION_Y);
 		/* Image sensors can report per-contact pressure */
 		input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
-		input_mt_init_slots(dev, 2, INPUT_MT_POINTER | INPUT_MT_TRACK);
+		input_mt_init_slots(dev, 3, INPUT_MT_POINTER | INPUT_MT_TRACK);
 
 		/* Image sensors can signal 4 and 5 finger clicks */
 		__set_bit(BTN_TOOL_QUADTAP, dev->keybit);
@@ -1418,29 +1426,11 @@ static const struct dmi_system_id __initconst cr48_dmi_table[] = {
 	{ }
 };
 
-static const struct dmi_system_id forcepad_dmi_table[] __initconst = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Folio 1040 G1"),
-		},
-	},
-#endif
-	{ }
-};
-
 void __init synaptics_module_init(void)
 {
 	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
 	broken_olpc_ec = dmi_check_system(olpc_dmi_table);
 	cr48_profile_sensor = dmi_check_system(cr48_dmi_table);
-
-	/*
-	 * Unfortunately ForcePad capability is not exported over PS/2,
-	 * so we have to resort to checking DMI.
-	 */
-	is_forcepad = dmi_check_system(forcepad_dmi_table);
 }
 
 static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
@@ -1475,6 +1465,12 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode)
 	if (SYN_ID_DISGEST_SUPPORTED(priv->identity))
 		priv->disable_gesture = true;
 
+	/*
+	 * Unfortunately ForcePad capability is not exported over PS/2,
+	 * so we have to resort to checking PNP IDs.
+	 */
+	priv->is_forcepad = psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids);
+
 	if (synaptics_set_mode(psmouse)) {
 		psmouse_err(psmouse, "Unable to initialize device.\n");
 		goto init_fail;

drivers/input/mouse/synaptics.h

@@ -196,6 +196,7 @@ struct synaptics_data {
 	unsigned long				press_start;
 	bool					press;
 	bool					report_press;
+	bool					is_forcepad;
 };
 
 void synaptics_module_init(void);

drivers/input/serio/gscps2.c

@@ -31,7 +31,6 @@
 #include <linux/spinlock.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
-#include <linux/pci_ids.h>
 
 #include <asm/irq.h>
 #include <asm/io.h>

drivers/input/serio/i8042.c

@@ -1162,13 +1162,32 @@ static int i8042_controller_resume(bool force_reset)
 
 static int i8042_pm_suspend(struct device *dev)
 {
+	int i;
+
 	i8042_controller_reset(true);
 
+	/* Set up serio interrupts for system wakeup. */
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			enable_irq_wake(i8042_ports[i].irq);
+	}
+
 	return 0;
 }
 
 static int i8042_pm_resume(struct device *dev)
 {
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio && device_may_wakeup(&serio->dev))
+			disable_irq_wake(i8042_ports[i].irq);
+	}
+
 	/*
 	 * On resume from S2R we always try to reset the controller
 	 * to bring it in a sane state. (In case of S2D we expect
@@ -1300,13 +1319,16 @@ static void __init i8042_register_ports(void)
 	int i;
 
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
-		if (i8042_ports[i].serio) {
+		struct serio *serio = i8042_ports[i].serio;
+
+		if (serio) {
 			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
-				i8042_ports[i].serio->name,
+				serio->name,
 				(unsigned long) I8042_DATA_REG,
 				(unsigned long) I8042_COMMAND_REG,
 				i8042_ports[i].irq);
-			serio_register_port(i8042_ports[i].serio);
+			serio_register_port(serio);
+			device_set_wakeup_capable(&serio->dev, true);
 		}
 	}
 }

drivers/input/touchscreen/Kconfig

@@ -140,6 +140,19 @@ config TOUCHSCREEN_BU21013
 	  To compile this driver as a module, choose M here: the
 	  module will be called bu21013_ts.
 
+config TOUCHSCREEN_CHIPONE_ICN8318
+	tristate "chipone icn8318 touchscreen controller"
+	depends on GPIOLIB
+	depends on I2C
+	depends on OF
+	help
+	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chipone_icn8318.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C
@@ -297,11 +310,12 @@ config TOUCHSCREEN_FUJITSU
 
 config TOUCHSCREEN_GOODIX
 	tristate "Goodix I2C touchscreen"
-	depends on I2C && ACPI
+	depends on I2C
 	help
 	  Say Y here if you have the Goodix touchscreen (such as one
 	  installed in Onda v975w tablets) connected to your
-	  system.
+	  system. It also supports 5-finger chip models, which can be
+	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
 
 	  If unsure, say N.
 
@@ -323,6 +337,18 @@ config TOUCHSCREEN_ILI210X
 	  To compile this driver as a module, choose M here: the
 	  module will be called ili210x.
 
+config TOUCHSCREEN_IPROC
+	tristate "IPROC touch panel driver support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Say Y here if you want to add support for the IPROC touch
+	  controller to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm_iproc_tsc.
+
 config TOUCHSCREEN_S3C2410
 	tristate "Samsung S3C2410/generic touchscreen input driver"
 	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
@@ -962,6 +988,17 @@ config TOUCHSCREEN_SUR40
 	  To compile this driver as a module, choose M here: the
 	  module will be called sur40.
 
+config TOUCHSCREEN_SX8654
+	tristate "Semtech SX8654 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a Semtech SX8654 touchscreen controller.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx8654.
+
 config TOUCHSCREEN_TPS6507X
 	tristate "TPS6507x based touchscreens"
 	depends on I2C

drivers/input/touchscreen/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
@@ -39,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
 obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_IPROC)		+= bcm_iproc_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
@@ -79,5 +81,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
 obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
 obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o

drivers/input/touchscreen/ar1021_i2c.c

@@ -157,7 +157,7 @@ static const struct i2c_device_id ar1021_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);
 
-static struct of_device_id ar1021_i2c_of_match[] = {
+static const struct of_device_id ar1021_i2c_of_match[] = {
 	{ .compatible = "microchip,ar1021-i2c", },
 	{ }
 };

drivers/input/touchscreen/chipone_icn8318.c

+/*
+ * Driver for ChipOne icn8318 i2c touchscreen controller
+ *
+ * Copyright (c) 2015 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define ICN8318_REG_POWER		4
+#define ICN8318_REG_TOUCHDATA		16
+
+#define ICN8318_POWER_ACTIVE		0
+#define ICN8318_POWER_MONITOR		1
+#define ICN8318_POWER_HIBERNATE		2
+
+#define ICN8318_MAX_TOUCHES		5
+
+struct icn8318_touch {
+	__u8 slot;
+	__be16 x;
+	__be16 y;
+	__u8 pressure;	/* Seems more like finger width then pressure really */
+	__u8 event;
+/* The difference between 2 and 3 is unclear */
+#define ICN8318_EVENT_NO_DATA	1 /* No finger seen yet since wakeup */
+#define ICN8318_EVENT_UPDATE1	2 /* New or updated coordinates */
+#define ICN8318_EVENT_UPDATE2	3 /* New or updated coordinates */
+#define ICN8318_EVENT_END	4 /* Finger lifted */
+} __packed;
+
+struct icn8318_touch_data {
+	__u8 softbutton;
+	__u8 touch_count;
+	struct icn8318_touch touches[ICN8318_MAX_TOUCHES];
+} __packed;
+
+struct icn8318_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *wake_gpio;
+	u32 max_x;
+	u32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+static int icn8318_read_touch_data(struct i2c_client *client,
+				   struct icn8318_touch_data *touch_data)
+{
+	u8 reg = ICN8318_REG_TOUCHDATA;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(struct icn8318_touch_data),
+			.buf = (u8 *)touch_data
+		}
+	};
+
+	return i2c_transfer(client->adapter, msg, 2);
+}
+
+static inline bool icn8318_touch_active(u8 event)
+{
+	return (event == ICN8318_EVENT_UPDATE1) ||
+	       (event == ICN8318_EVENT_UPDATE2);
+}
+
+static irqreturn_t icn8318_irq(int irq, void *dev_id)
+{
+	struct icn8318_data *data = dev_id;
+	struct device *dev = &data->client->dev;
+	struct icn8318_touch_data touch_data;
+	int i, ret, x, y;
+
+	ret = icn8318_read_touch_data(data->client, &touch_data);
+	if (ret < 0) {
+		dev_err(dev, "Error reading touch data: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.softbutton) {
+		/*
+		 * Other data is invalid when a softbutton is pressed.
+		 * This needs some extra devicetree bindings to map the icn8318
+		 * softbutton codes to evdev codes. Currently no known devices
+		 * use this.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.touch_count > ICN8318_MAX_TOUCHES) {
+		dev_warn(dev, "Too much touches %d > %d\n",
+			 touch_data.touch_count, ICN8318_MAX_TOUCHES);
+		touch_data.touch_count = ICN8318_MAX_TOUCHES;
+	}
+
+	for (i = 0; i < touch_data.touch_count; i++) {
+		struct icn8318_touch *touch = &touch_data.touches[i];
+		bool act = icn8318_touch_active(touch->event);
+
+		input_mt_slot(data->input, touch->slot);
+		input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act);
+		if (!act)
+			continue;
+
+		x = be16_to_cpu(touch->x);
+		y = be16_to_cpu(touch->y);
+
+		if (data->invert_x)
+			x = data->max_x - x;
+
+		if (data->invert_y)
+			y = data->max_y - y;
+
+		if (!data->swap_x_y) {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
+		} else {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
+		}
+	}
+
+	input_mt_sync_frame(data->input);
+	input_sync(data->input);
+
+	return IRQ_HANDLED;
+}
+
+static int icn8318_start(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	enable_irq(data->client->irq);
+	gpiod_set_value_cansleep(data->wake_gpio, 1);
+
+	return 0;
+}
+
+static void icn8318_stop(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	disable_irq(data->client->irq);
+	i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER,
+				  ICN8318_POWER_HIBERNATE);
+	gpiod_set_value_cansleep(data->wake_gpio, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int icn8318_suspend(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_stop(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+
+static int icn8318_resume(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_start(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume);
+
+static int icn8318_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct icn8318_data *data;
+	struct input_dev *input;
+	u32 fuzz_x = 0, fuzz_y = 0;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "Error no irq specified\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW);
+	if (IS_ERR(data->wake_gpio)) {
+		error = PTR_ERR(data->wake_gpio);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Error getting wake gpio: %d\n", error);
+		return error;
+	}
+
+	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
+	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	/* Optional */
+	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
+	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
+	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
+	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = icn8318_start;
+	input->close = icn8318_stop;
+	input->dev.parent = dev;
+
+	if (!data->swap_x_y) {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_x, fuzz_x, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_y, fuzz_y, 0);
+	} else {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_y, fuzz_y, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_x, fuzz_x, 0);
+	}
+
+	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	data->client = client;
+	data->input = input;
+	input_set_drvdata(input, data);
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq,
+					  IRQF_ONESHOT, client->name, data);
+	if (error) {
+		dev_err(dev, "Error requesting irq: %d\n", error);
+		return error;
+	}
+
+	/* Stop device till opened */
+	icn8318_stop(data->input);
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static const struct of_device_id icn8318_of_match[] = {
+	{ .compatible = "chipone,icn8318" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, icn8318_of_match);
+
+/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */
+static const struct i2c_device_id icn8318_i2c_id[] = {
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id);
+
+static struct i2c_driver icn8318_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "chipone_icn8318",
+		.pm	= &icn8318_pm_ops,
+		.of_match_table = icn8318_of_match,
+	},
+	.probe = icn8318_probe,
+	.id_table = icn8318_i2c_id,
+};
+
+module_i2c_driver(icn8318_driver);
+
+MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");

drivers/input/touchscreen/edt-ft5x06.c

@@ -37,6 +37,7 @@
 #include <linux/gpio.h>
 #include <linux/of_gpio.h>
 #include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
 #include <linux/input/edt-ft5x06.h>
 
 #define MAX_SUPPORT_POINTS		5
@@ -1034,7 +1035,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
-	__set_bit(EV_SYN, input->evbit);
 	__set_bit(EV_KEY, input->evbit);
 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(BTN_TOUCH, input->keybit);
@@ -1044,6 +1044,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
 			     0, tsdata->num_x * 64 - 1, 0, 0);
 	input_set_abs_params(input, ABS_MT_POSITION_Y,
 			     0, tsdata->num_y * 64 - 1, 0, 0);
+
+	if (!pdata)
+		touchscreen_parse_of_params(input);
+
 	error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
 	if (error) {
 		dev_err(&client->dev, "Unable to init MT slots.\n");

drivers/input/touchscreen/elants_i2c.c

@@ -98,7 +98,6 @@
 #define MAX_FW_UPDATE_RETRIES	30
 
 #define ELAN_FW_PAGESIZE	132
-#define ELAN_FW_FILENAME	"elants_i2c.bin"
 
 /* calibration timeout definition */
 #define ELAN_CALI_TIMEOUT_MSEC	10000
@@ -697,12 +696,19 @@ static int elants_i2c_fw_update(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
 	const struct firmware *fw;
+	char *fw_name;
 	int error;
 
-	error = request_firmware(&fw, ELAN_FW_FILENAME, &client->dev);
+	fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version);
+	if (!fw_name)
+		return -ENOMEM;
+
+	dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
+	error = request_firmware(&fw, fw_name, &client->dev);
+	kfree(fw_name);
 	if (error) {
-		dev_err(&client->dev, "failed to request firmware %s: %d\n",
-			ELAN_FW_FILENAME, error);
+		dev_err(&client->dev, "failed to request firmware: %d\n",
+			error);
 		return error;
 	}
 

drivers/input/touchscreen/goodix.c

@@ -23,6 +23,8 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
 #include <asm/unaligned.h>
 
 struct goodix_ts_data {
@@ -48,6 +50,7 @@ struct goodix_ts_data {
 #define GOODIX_REG_VERSION		0x8140
 
 #define RESOLUTION_LOC		1
+#define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
 
 static const unsigned long goodix_irq_flags[] = {
@@ -99,7 +102,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
 	}
 
 	touch_num = data[0] & 0x0f;
-	if (touch_num > GOODIX_MAX_CONTACTS)
+	if (touch_num > ts->max_touch_num)
 		return -EPROTO;
 
 	if (touch_num > 1) {
@@ -141,7 +144,7 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
  */
 static void goodix_process_events(struct goodix_ts_data *ts)
 {
-	u8  point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+	u8  point_data[1 + GOODIX_CONTACT_SIZE * ts->max_touch_num];
 	int touch_num;
 	int i;
 
@@ -202,21 +205,23 @@ static void goodix_read_config(struct goodix_ts_data *ts)
 		ts->abs_x_max = GOODIX_MAX_WIDTH;
 		ts->abs_y_max = GOODIX_MAX_HEIGHT;
 		ts->int_trigger_type = GOODIX_INT_TRIGGER;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 		return;
 	}
 
 	ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
 	ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
-	ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03;
-	if (!ts->abs_x_max || !ts->abs_y_max) {
+	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
+	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+	if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
 		dev_err(&ts->client->dev,
 			"Invalid config, using defaults\n");
 		ts->abs_x_max = GOODIX_MAX_WIDTH;
 		ts->abs_y_max = GOODIX_MAX_HEIGHT;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
 	}
 }
 
-
 /**
  * goodix_read_version - Read goodix touchscreen version
  *
@@ -295,7 +300,7 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts)
 	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 
-	input_mt_init_slots(ts->input_dev, GOODIX_MAX_CONTACTS,
+	input_mt_init_slots(ts->input_dev, ts->max_touch_num,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
 
 	ts->input_dev->name = "Goodix Capacitive TouchScreen";
@@ -372,11 +377,27 @@ static const struct i2c_device_id goodix_ts_id[] = {
 	{ }
 };
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id goodix_acpi_match[] = {
 	{ "GDIX1001", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id goodix_of_match[] = {
+	{ .compatible = "goodix,gt911" },
+	{ .compatible = "goodix,gt9110" },
+	{ .compatible = "goodix,gt912" },
+	{ .compatible = "goodix,gt927" },
+	{ .compatible = "goodix,gt9271" },
+	{ .compatible = "goodix,gt928" },
+	{ .compatible = "goodix,gt967" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_of_match);
+#endif
 
 static struct i2c_driver goodix_ts_driver = {
 	.probe = goodix_ts_probe,
@@ -384,7 +405,8 @@ static struct i2c_driver goodix_ts_driver = {
 	.driver = {
 		.name = "Goodix-TS",
 		.owner = THIS_MODULE,
-		.acpi_match_table = goodix_acpi_match,
+		.acpi_match_table = ACPI_PTR(goodix_acpi_match),
+		.of_match_table = of_match_ptr(goodix_of_match),
 	},
 };
 module_i2c_driver(goodix_ts_driver);

drivers/input/touchscreen/of_touchscreen.c

@@ -11,8 +11,41 @@
 
 #include <linux/of.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/input/touchscreen.h>
 
+static u32 of_get_optional_u32(struct device_node *np,
+			       const char *property)
+{
+	u32 val = 0;
+
+	of_property_read_u32(np, property, &val);
+
+	return val;
+}
+
+static void touchscreen_set_params(struct input_dev *dev,
+				   unsigned long axis,
+				   int max, int fuzz)
+{
+	struct input_absinfo *absinfo;
+
+	if (!test_bit(axis, dev->absbit)) {
+		/*
+		 * Emit a warning only if the axis is not a multitouch
+		 * axis, which might not be set by the driver.
+		 */
+		if (!input_is_mt_axis(axis))
+			dev_warn(&dev->dev,
+				 "DT specifies parameters but the axis is not set up\n");
+		return;
+	}
+
+	absinfo = &dev->absinfo[axis];
+	absinfo->maximum = max;
+	absinfo->fuzz = fuzz;
+}
+
 /**
  * touchscreen_parse_of_params - parse common touchscreen DT properties
  * @dev: device that should be parsed
@@ -24,22 +57,31 @@
 void touchscreen_parse_of_params(struct input_dev *dev)
 {
 	struct device_node *np = dev->dev.parent->of_node;
-	struct input_absinfo *absinfo;
+	u32 maximum, fuzz;
 
 	input_alloc_absinfo(dev);
 	if (!dev->absinfo)
 		return;
 
-	absinfo = &dev->absinfo[ABS_X];
-	of_property_read_u32(np, "touchscreen-size-x", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-x", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-size-x");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_X, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_POSITION_X, maximum, fuzz);
+	}
 
-	absinfo = &dev->absinfo[ABS_Y];
-	of_property_read_u32(np, "touchscreen-size-y", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-y", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-size-y");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_Y, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_POSITION_Y, maximum, fuzz);
+	}
 
-	absinfo = &dev->absinfo[ABS_PRESSURE];
-	of_property_read_u32(np, "touchscreen-max-pressure", &absinfo->maximum);
-	of_property_read_u32(np, "touchscreen-fuzz-pressure", &absinfo->fuzz);
+	maximum = of_get_optional_u32(np, "touchscreen-max-pressure");
+	fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure");
+	if (maximum || fuzz) {
+		touchscreen_set_params(dev, ABS_PRESSURE, maximum, fuzz);
+		touchscreen_set_params(dev, ABS_MT_PRESSURE, maximum, fuzz);
+	}
 }
 EXPORT_SYMBOL(touchscreen_parse_of_params);

drivers/input/touchscreen/sun4i-ts.c

@@ -30,6 +30,10 @@
  * These kinds of heuristics are just asking for trouble (and don't belong
  * in the kernel). So this driver offers straight forward, reliable single
  * touch functionality only.
+ *
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * (looks like the description in the A20 User Manual v1.3 is better
+ * than the one in the A10 User Manual v.1.5)
  */
 
 #include <linux/err.h>
@@ -193,7 +197,7 @@ static int sun4i_get_temp(const struct sun4i_ts_data *ts, long *temp)
 	if (ts->temp_data == -1)
 		return -EAGAIN;
 
-	*temp = (ts->temp_data - ts->temp_offset) * ts->temp_step;
+	*temp = ts->temp_data * ts->temp_step - ts->temp_offset;
 
 	return 0;
 }
@@ -246,6 +250,8 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	int error;
 	u32 reg;
 	bool ts_attached;
+	u32 tp_sensitive_adjust = 15;
+	u32 filter_type = 1;
 
 	ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
 	if (!ts)
@@ -255,22 +261,31 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	ts->ignore_fifo_data = true;
 	ts->temp_data = -1;
 	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) {
-		/* Allwinner SDK has temperature = -271 + (value / 6) (C) */
-		ts->temp_offset = 1626;
+		/* Allwinner SDK has temperature (C) = (value / 6) - 271 */
+		ts->temp_offset = 271000;
 		ts->temp_step = 167;
+	} else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) {
+		/*
+		 * The A10 temperature sensor has quite a wide spread, these
+		 * parameters are based on the averaging of the calibration
+		 * results of 4 completely different boards, with a spread of
+		 * temp_step from 0.096 - 0.170 and temp_offset from 176 - 331.
+		 */
+		ts->temp_offset = 257000;
+		ts->temp_step = 133;
 	} else {
 		/*
 		 * The user manuals do not contain the formula for calculating
 		 * the temperature. The formula used here is from the AXP209,
 		 * which is designed by X-Powers, an affiliate of Allwinner:
 		 *
-		 *     temperature = -144.7 + (value * 0.1)
+		 *     temperature (C) = (value * 0.1) - 144.7
 		 *
 		 * Allwinner does not have any documentation whatsoever for
 		 * this hardware. Moreover, it is claimed that the sensor
 		 * is inaccurate and cannot work properly.
 		 */
-		ts->temp_offset = 1447;
+		ts->temp_offset = 144700;
 		ts->temp_step = 100;
 	}
 
@@ -313,14 +328,20 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	       ts->base + TP_CTRL0);
 
 	/*
-	 * sensitive_adjust = 15 : max, which is not all that sensitive,
+	 * tp_sensitive_adjust is an optional property
 	 * tp_mode = 0 : only x and y coordinates, as we don't use dual touch
 	 */
-	writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0),
+	of_property_read_u32(np, "allwinner,tp-sensitive-adjust",
+			     &tp_sensitive_adjust);
+	writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0),
 	       ts->base + TP_CTRL2);
 
-	/* Enable median filter, type 1 : 5/3 */
-	writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3);
+	/*
+	 * Enable median and averaging filter, optional property for
+	 * filter type.
+	 */
+	of_property_read_u32(np, "allwinner,filter-type", &filter_type);
+	writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3);
 
 	/* Enable temperature measurement, period 1953 (2 seconds) */
 	writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
@@ -330,10 +351,10 @@ static int sun4i_ts_probe(struct platform_device *pdev)
 	 * finally enable tp mode.
 	 */
 	reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1);
-	if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts"))
-		reg |= TP_MODE_EN(1);
-	else
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts"))
 		reg |= SUN6I_TP_MODE_EN(1);
+	else
+		reg |= TP_MODE_EN(1);
 	writel(reg, ts->base + TP_CTRL1);
 
 	/*
@@ -383,6 +404,7 @@ static int sun4i_ts_remove(struct platform_device *pdev)
 
 static const struct of_device_id sun4i_ts_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-ts", },
+	{ .compatible = "allwinner,sun5i-a13-ts", },
 	{ .compatible = "allwinner,sun6i-a31-ts", },
 	{ /* sentinel */ }
 };

drivers/input/touchscreen/tsc2007.c

@@ -75,7 +75,7 @@ struct tsc2007 {
 	u16			model;
 	u16			x_plate_ohms;
 	u16			max_rt;
-	unsigned long		poll_period;
+	unsigned long		poll_period; /* in jiffies */
 	int			fuzzx;
 	int			fuzzy;
 	int			fuzzz;
@@ -214,8 +214,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
 			dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
 		}
 
-		wait_event_timeout(ts->wait, ts->stopped,
-				   msecs_to_jiffies(ts->poll_period));
+		wait_event_timeout(ts->wait, ts->stopped, ts->poll_period);
 	}
 
 	dev_dbg(&ts->client->dev, "UP\n");
@@ -314,9 +313,9 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
 		ts->fuzzz = val32;
 
 	if (!of_property_read_u64(np, "ti,poll-period", &val64))
-		ts->poll_period = val64;
+		ts->poll_period = msecs_to_jiffies(val64);
 	else
-		ts->poll_period = 1;
+		ts->poll_period = msecs_to_jiffies(1);
 
 	if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
 		ts->x_plate_ohms = val32;
@@ -350,7 +349,7 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
 	ts->model             = pdata->model;
 	ts->x_plate_ohms      = pdata->x_plate_ohms;
 	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
-	ts->poll_period       = pdata->poll_period ? : 1;
+	ts->poll_period       = msecs_to_jiffies(pdata->poll_period ? : 1);
 	ts->get_pendown_state = pdata->get_pendown_state;
 	ts->clear_penirq      = pdata->clear_penirq;
 	ts->fuzzx             = pdata->fuzzx;

drivers/input/touchscreen/usbtouchscreen.c

@@ -132,6 +132,7 @@ enum {
 	DEVTYPE_GUNZE,
 	DEVTYPE_DMC_TSC10,
 	DEVTYPE_IRTOUCH,
+	DEVTYPE_IRTOUCH_HIRES,
 	DEVTYPE_IDEALTEK,
 	DEVTYPE_GENERAL_TOUCH,
 	DEVTYPE_GOTOP,
@@ -198,6 +199,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
 	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
 	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
@@ -1177,6 +1179,15 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.rept_size	= 8,
 		.read_data	= irtouch_read_data,
 	},
+
+	[DEVTYPE_IRTOUCH_HIRES] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x7fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x7fff,
+		.rept_size	= 8,
+		.read_data	= irtouch_read_data,
+	},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK

drivers/platform/x86/fujitsu-tablet.c

@@ -59,7 +59,7 @@ static unsigned short keymap_Lifebook_Tseries[KEYMAP_LEN] __initdata = {
 	KEY_RESERVED,
 	KEY_SCROLLDOWN,
 	KEY_SCROLLUP,
-	KEY_DIRECTION,
+	KEY_ROTATE_DISPLAY,
 	KEY_LEFTCTRL,
 	KEY_BRIGHTNESSUP,
 	KEY_BRIGHTNESSDOWN,
@@ -116,7 +116,7 @@ static unsigned short keymap_Lifebook_U810[KEYMAP_LEN] __initdata = {
 	KEY_RESERVED,
 	KEY_PROG1,
 	KEY_PROG2,
-	KEY_DIRECTION,
+	KEY_ROTATE_DISPLAY,
 	KEY_RESERVED,
 	KEY_RESERVED,
 	KEY_RESERVED,
@@ -153,7 +153,7 @@ static unsigned short keymap_Stylistic_ST5xxx[KEYMAP_LEN] __initdata = {
 	KEY_RESERVED,
 	KEY_RESERVED,
 	KEY_MAIL,
-	KEY_DIRECTION,
+	KEY_ROTATE_DISPLAY,
 	KEY_ESC,
 	KEY_ENTER,
 	KEY_BRIGHTNESSUP,

drivers/platform/x86/hp-wmi.c

@@ -144,7 +144,7 @@ static const struct key_entry hp_wmi_keymap[] = {
 	{ KE_KEY, 0x20e8, { KEY_MEDIA } },
 	{ KE_KEY, 0x2142, { KEY_MEDIA } },
 	{ KE_KEY, 0x213b, { KEY_INFO } },
-	{ KE_KEY, 0x2169, { KEY_DIRECTION } },
+	{ KE_KEY, 0x2169, { KEY_ROTATE_DISPLAY } },
 	{ KE_KEY, 0x216a, { KEY_SETUP } },
 	{ KE_KEY, 0x231b, { KEY_HELP } },
 	{ KE_END, 0 }

include/linux/mfd/tc3589x.h

@@ -140,36 +140,13 @@ extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
 #define TC_KPD_DEBOUNCE_PERIOD  0xA3
 #define TC_KPD_SETTLE_TIME      0xA3
 
-/**
- * struct tc35893_platform_data - data structure for platform specific data
- * @keymap_data:        matrix scan code table for keycodes
- * @krow:               mask for available rows, value is 0xFF
- * @kcol:               mask for available columns, value is 0xFF
- * @debounce_period:    platform specific debounce time
- * @settle_time:        platform specific settle down time
- * @irqtype:            type of interrupt, falling or rising edge
- * @enable_wakeup:      specifies if keypad event can wake up system from sleep
- * @no_autorepeat:      flag for auto repetition
- */
-struct tc3589x_keypad_platform_data {
-	const struct matrix_keymap_data *keymap_data;
-	u8                      krow;
-	u8                      kcol;
-	u8                      debounce_period;
-	u8                      settle_time;
-	unsigned long           irqtype;
-	bool                    enable_wakeup;
-	bool                    no_autorepeat;
-};
 
 /**
  * struct tc3589x_platform_data - TC3589x platform data
  * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
- * @keypad: keypad-specific platform data
  */
 struct tc3589x_platform_data {
 	unsigned int block;
-	const struct tc3589x_keypad_platform_data *keypad;
 };
 
 #endif

include/uapi/linux/input.h

@@ -369,7 +369,8 @@ struct input_keymap_entry {
 #define KEY_MSDOS		151
 #define KEY_COFFEE		152	/* AL Terminal Lock/Screensaver */
 #define KEY_SCREENLOCK		KEY_COFFEE
-#define KEY_DIRECTION		153
+#define KEY_ROTATE_DISPLAY	153	/* Display orientation for e.g. tablets */
+#define KEY_DIRECTION		KEY_ROTATE_DISPLAY
 #define KEY_CYCLEWINDOWS	154
 #define KEY_MAIL		155
 #define KEY_BOOKMARKS		156	/* AC Bookmarks */