Commit 86c53bd2 authored by Jonathan Woithe's avatar Jonathan Woithe Committed by Jaroslav Kysela

[ALSA] hda-codec - Add test model for ALC268

This implements a test model for the ALC268.  It depends on the feature
added by alc260-test-eapd-0.2.diff.  This patch also adds a mention of
the ALC260 test model to ALSA-Configuration.txt since this seems to have
been missed.
Signed-off-by: default avatarJonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarJaroslav Kysela <perex@perex.cz>
parent f8225f6d
......@@ -801,6 +801,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
will Will laptops (PB V7900)
replacer Replacer 672V
basic fixed pin assignment (old default model)
test for testing/debugging purpose, almost all controls can
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
auto auto-config reading BIOS (default)
ALC262
......@@ -821,6 +824,9 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
3stack 3-stack model
toshiba Toshiba A205
acer Acer laptops
test for testing/debugging purpose, almost all controls can
adjusted. Appearing only when compiled with
$CONFIG_SND_DEBUG=y
auto auto-config reading BIOS (default)
ALC662
......
......@@ -106,6 +106,9 @@ enum {
ALC268_3ST,
ALC268_TOSHIBA,
ALC268_ACER,
#ifdef CONFIG_SND_DEBUG
ALC268_TEST,
#endif
ALC268_AUTO,
ALC268_MODEL_LAST /* last tag */
};
......@@ -9366,6 +9369,60 @@ static struct hda_input_mux alc268_capture_source = {
},
};
#ifdef CONFIG_SND_DEBUG
static struct snd_kcontrol_new alc268_test_mixer[] = {
HDA_CODEC_VOLUME("Front Playback Volume", 0x2, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Front Playback Switch", 0x14, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Headphone Playback Volume", 0x3, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Headphone Playback Switch", 0x15, 0x0, HDA_OUTPUT),
/* Volume widgets */
HDA_CODEC_VOLUME("LOUT1 Playback Volume", 0x02, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("LOUT2 Playback Volume", 0x03, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE_MONO("Mono sum Playback Switch", 0x0e, 1, 2, HDA_INPUT),
HDA_BIND_MUTE("LINE-OUT sum Playback Switch", 0x0f, 2, HDA_INPUT),
HDA_BIND_MUTE("HP-OUT sum Playback Switch", 0x10, 2, HDA_INPUT),
HDA_BIND_MUTE("LINE-OUT Playback Switch", 0x14, 2, HDA_OUTPUT),
HDA_BIND_MUTE("HP-OUT Playback Switch", 0x15, 2, HDA_OUTPUT),
HDA_BIND_MUTE("Mono Playback Switch", 0x16, 2, HDA_OUTPUT),
HDA_CODEC_VOLUME("MIC1 Capture Volume", 0x18, 0x0, HDA_INPUT),
HDA_BIND_MUTE("MIC1 Capture Switch", 0x18, 2, HDA_OUTPUT),
HDA_CODEC_VOLUME("MIC2 Capture Volume", 0x19, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("LINE1 Capture Volume", 0x1a, 0x0, HDA_INPUT),
HDA_BIND_MUTE("LINE1 Capture Switch", 0x1a, 2, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCBEEP Playback Volume", 0x1d, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("PCM-IN1 Capture Volume", 0x23, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("PCM-IN1 Capture Switch", 0x23, 2, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM-IN2 Capture Volume", 0x24, 0x0, HDA_OUTPUT),
HDA_BIND_MUTE("PCM-IN2 Capture Switch", 0x24, 2, HDA_OUTPUT),
/* Modes for retasking pin widgets */
ALC_PIN_MODE("LINE-OUT pin mode", 0x14, ALC_PIN_DIR_INOUT),
ALC_PIN_MODE("HP-OUT pin mode", 0x15, ALC_PIN_DIR_INOUT),
ALC_PIN_MODE("MIC1 pin mode", 0x18, ALC_PIN_DIR_INOUT),
ALC_PIN_MODE("LINE1 pin mode", 0x1a, ALC_PIN_DIR_INOUT),
/* Controls for GPIO pins, assuming they are configured as outputs */
ALC_GPIO_DATA_SWITCH("GPIO pin 0", 0x01, 0x01),
ALC_GPIO_DATA_SWITCH("GPIO pin 1", 0x01, 0x02),
ALC_GPIO_DATA_SWITCH("GPIO pin 2", 0x01, 0x04),
ALC_GPIO_DATA_SWITCH("GPIO pin 3", 0x01, 0x08),
/* Switches to allow the digital SPDIF output pin to be enabled.
* The ALC268 does not have an SPDIF input.
*/
ALC_SPDIF_CTRL_SWITCH("SPDIF Playback Switch", 0x06, 0x01),
/* A switch allowing EAPD to be enabled. Some laptops seem to use
* this output to turn on an external amplifier.
*/
ALC_EAPD_CTRL_SWITCH("LINE-OUT EAPD Enable Switch", 0x0f, 0x02),
ALC_EAPD_CTRL_SWITCH("HP-OUT EAPD Enable Switch", 0x10, 0x02),
{ } /* end */
};
#endif
/* create input playback/capture controls for the given pin */
static int alc268_new_analog_output(struct alc_spec *spec, hda_nid_t nid,
const char *ctlname, int idx)
......@@ -9578,6 +9635,9 @@ static const char *alc268_models[ALC268_MODEL_LAST] = {
[ALC268_3ST] = "3stack",
[ALC268_TOSHIBA] = "toshiba",
[ALC268_ACER] = "acer",
#ifdef CONFIG_SND_DEBUG
[ALC268_TEST] = "test",
#endif
[ALC268_AUTO] = "auto",
};
......@@ -9636,6 +9696,22 @@ static struct alc_config_preset alc268_presets[] = {
.unsol_event = alc268_acer_unsol_event,
.init_hook = alc268_acer_init_hook,
},
#ifdef CONFIG_SND_DEBUG
[ALC268_TEST] = {
.mixers = { alc268_test_mixer, alc268_capture_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_volume_init_verbs },
.num_dacs = ARRAY_SIZE(alc268_dac_nids),
.dac_nids = alc268_dac_nids,
.num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt),
.adc_nids = alc268_adc_nids_alt,
.hp_nid = 0x03,
.dig_out_nid = ALC268_DIGOUT_NID,
.num_channel_mode = ARRAY_SIZE(alc268_modes),
.channel_mode = alc268_modes,
.input_mux = &alc268_capture_source,
},
#endif
};
static int patch_alc268(struct hda_codec *codec)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment