Commit 8701f185 authored by Wayne Boyer's avatar Wayne Boyer Committed by James Bottomley

[SCSI] ipr: add endian swap enablement for 64 bit adapters

A change in the hardware design of the chip for the new adapters changes the
default endianness of MMIO operations.  This patch adds a register definition
which when written to with a predefined value will change the endianness
back to what the driver expects.

This patch also fixes two problems found during testing.

First, the first reserved field in the ipr_hostrcb64_fabirc_desc structure only
reserved one byte.  The correct amount to reserve is 2 bytes.

Second, the reserved field of the ipr_hostrcb64_error structure only reserved
2 bytes.  The correct amount to reserve is 16 bytes.
Signed-off-by: default avatarWayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: default avatarBrian King <brking@linux.vnet.ibm.com>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
parent da2907ff
......@@ -167,7 +167,8 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
.clr_uproc_interrupt_reg32 = 0x0002C,
.init_feedback_reg = 0x0005C,
.dump_addr_reg = 0x00064,
.dump_data_reg = 0x00068
.dump_data_reg = 0x00068,
.endian_swap_reg = 0x00084
}
},
};
......@@ -7208,6 +7209,12 @@ static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd)
ipr_init_ioa_mem(ioa_cfg);
ioa_cfg->allow_interrupts = 1;
if (ioa_cfg->sis64) {
/* Set the adapter to the correct endian mode. */
writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
int_reg = readl(ioa_cfg->regs.endian_swap_reg);
}
int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32);
if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) {
......@@ -7365,6 +7372,7 @@ static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
{
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
volatile u32 int_reg;
int rc;
ENTER;
......@@ -7383,6 +7391,12 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
ipr_fail_all_ops(ioa_cfg);
if (ioa_cfg->sis64) {
/* Set the adapter to the correct endian mode. */
writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg);
int_reg = readl(ioa_cfg->regs.endian_swap_reg);
}
if (ioa_cfg->ioa_unit_checked) {
ioa_cfg->ioa_unit_checked = 0;
ipr_get_unit_check_buffer(ioa_cfg);
......@@ -7547,7 +7561,7 @@ static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd)
}
/**
* ipr_reset_alert_part2 - Alert the adapter of a pending reset
* ipr_reset_alert - Alert the adapter of a pending reset
* @ipr_cmd: ipr command struct
*
* Description: This function alerts the adapter that it will be reset.
......@@ -8318,6 +8332,7 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
t->init_feedback_reg = base + p->init_feedback_reg;
t->dump_addr_reg = base + p->dump_addr_reg;
t->dump_data_reg = base + p->dump_data_reg;
t->endian_swap_reg = base + p->endian_swap_reg;
}
}
......
......@@ -996,7 +996,7 @@ struct ipr_hostrcb64_fabric_desc {
__be16 length;
u8 descriptor_id;
u8 reserved;
u8 reserved[2];
u8 path_state;
u8 reserved2[2];
......@@ -1054,7 +1054,7 @@ struct ipr_hostrcb64_error {
__be64 fd_lun;
u8 fd_res_path[8];
__be64 time_stamp;
u8 reserved[2];
u8 reserved[16];
union {
struct ipr_hostrcb_type_ff_error type_ff_error;
struct ipr_hostrcb_type_12_error type_12_error;
......@@ -1254,6 +1254,9 @@ struct ipr_interrupt_offsets {
unsigned long dump_addr_reg;
unsigned long dump_data_reg;
#define IPR_ENDIAN_SWAP_KEY 0x000C0C00
unsigned long endian_swap_reg;
};
struct ipr_interrupts {
......@@ -1279,6 +1282,8 @@ struct ipr_interrupts {
void __iomem *dump_addr_reg;
void __iomem *dump_data_reg;
void __iomem *endian_swap_reg;
};
struct ipr_chip_cfg_t {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment