Commit 871af121 authored by Alan Cox's avatar Alan Cox Committed by Jeff Garzik

libata: Add 32bit PIO support

This matters for some controllers and in one or two cases almost doubles
PIO performance. Add a bmdma32 operations set we can inherit and activate
it for some controllers
Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent e427fe04
...@@ -310,7 +310,7 @@ static struct scsi_host_template piix_sht = { ...@@ -310,7 +310,7 @@ static struct scsi_host_template piix_sht = {
}; };
static struct ata_port_operations piix_pata_ops = { static struct ata_port_operations piix_pata_ops = {
.inherits = &ata_bmdma_port_ops, .inherits = &ata_bmdma32_port_ops,
.cable_detect = ata_cable_40wire, .cable_detect = ata_cable_40wire,
.set_piomode = piix_set_piomode, .set_piomode = piix_set_piomode,
.set_dmamode = piix_set_dmamode, .set_dmamode = piix_set_dmamode,
......
...@@ -78,6 +78,13 @@ const struct ata_port_operations ata_bmdma_port_ops = { ...@@ -78,6 +78,13 @@ const struct ata_port_operations ata_bmdma_port_ops = {
.bmdma_status = ata_bmdma_status, .bmdma_status = ata_bmdma_status,
}; };
const struct ata_port_operations ata_bmdma32_port_ops = {
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
/** /**
* ata_fill_sg - Fill PCI IDE PRD table * ata_fill_sg - Fill PCI IDE PRD table
* @qc: Metadata associated with taskfile to be transferred * @qc: Metadata associated with taskfile to be transferred
...@@ -718,6 +725,52 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf, ...@@ -718,6 +725,52 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
return words << 1; return words << 1;
} }
/**
* ata_sff_data_xfer32 - Transfer data by PIO
* @dev: device to target
* @buf: data buffer
* @buflen: buffer length
* @rw: read/write
*
* Transfer data from/to the device data register by PIO using 32bit
* I/O operations.
*
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* Bytes consumed.
*/
unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
unsigned int buflen, int rw)
{
struct ata_port *ap = dev->link->ap;
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
/* Transfer multiple of 4 bytes */
if (rw == READ)
ioread32_rep(data_addr, buf, words);
else
iowrite32_rep(data_addr, buf, words);
if (unlikely(slop)) {
__le32 pad;
if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
} else {
memcpy(&pad, buf + buflen - slop, slop);
iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
}
words++;
}
return words << 2;
}
EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
/** /**
* ata_sff_data_xfer_noirq - Transfer data by PIO * ata_sff_data_xfer_noirq - Transfer data by PIO
* @dev: device to target * @dev: device to target
......
...@@ -151,8 +151,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o ...@@ -151,8 +151,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o
pci_read_config_byte(pdev, pio_fifo, &fifo); pci_read_config_byte(pdev, pio_fifo, &fifo);
fifo &= ~(0x0F << shift); fifo &= ~(0x0F << shift);
if (on) fifo |= (on << shift);
fifo |= (on << shift);
pci_write_config_byte(pdev, pio_fifo, fifo); pci_write_config_byte(pdev, pio_fifo, fifo);
} }
...@@ -370,10 +369,11 @@ static struct ata_port_operations ali_early_port_ops = { ...@@ -370,10 +369,11 @@ static struct ata_port_operations ali_early_port_ops = {
.inherits = &ata_sff_port_ops, .inherits = &ata_sff_port_ops,
.cable_detect = ata_cable_40wire, .cable_detect = ata_cable_40wire,
.set_piomode = ali_set_piomode, .set_piomode = ali_set_piomode,
.sff_data_xfer = ata_sff_data_xfer32,
}; };
static const struct ata_port_operations ali_dma_base_ops = { static const struct ata_port_operations ali_dma_base_ops = {
.inherits = &ata_bmdma_port_ops, .inherits = &ata_bmdma32_port_ops,
.set_piomode = ali_set_piomode, .set_piomode = ali_set_piomode,
.set_dmamode = ali_set_dmamode, .set_dmamode = ali_set_dmamode,
}; };
......
...@@ -24,7 +24,7 @@ ...@@ -24,7 +24,7 @@
#include <linux/libata.h> #include <linux/libata.h>
#define DRV_NAME "pata_amd" #define DRV_NAME "pata_amd"
#define DRV_VERSION "0.3.10" #define DRV_VERSION "0.3.11"
/** /**
* timing_setup - shared timing computation and load * timing_setup - shared timing computation and load
...@@ -345,7 +345,7 @@ static struct scsi_host_template amd_sht = { ...@@ -345,7 +345,7 @@ static struct scsi_host_template amd_sht = {
}; };
static const struct ata_port_operations amd_base_port_ops = { static const struct ata_port_operations amd_base_port_ops = {
.inherits = &ata_bmdma_port_ops, .inherits = &ata_bmdma32_port_ops,
.prereset = amd_pre_reset, .prereset = amd_pre_reset,
}; };
......
...@@ -35,7 +35,7 @@ ...@@ -35,7 +35,7 @@
#include <linux/libata.h> #include <linux/libata.h>
#define DRV_NAME "pata_mpiix" #define DRV_NAME "pata_mpiix"
#define DRV_VERSION "0.7.6" #define DRV_VERSION "0.7.7"
enum { enum {
IDETIM = 0x6C, /* IDE control register */ IDETIM = 0x6C, /* IDE control register */
...@@ -146,6 +146,7 @@ static struct ata_port_operations mpiix_port_ops = { ...@@ -146,6 +146,7 @@ static struct ata_port_operations mpiix_port_ops = {
.cable_detect = ata_cable_40wire, .cable_detect = ata_cable_40wire,
.set_piomode = mpiix_set_piomode, .set_piomode = mpiix_set_piomode,
.prereset = mpiix_pre_reset, .prereset = mpiix_pre_reset,
.sff_data_xfer = ata_sff_data_xfer32,
}; };
static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
......
...@@ -32,7 +32,7 @@ ...@@ -32,7 +32,7 @@
#include <linux/libata.h> #include <linux/libata.h>
#define DRV_NAME "pata_sil680" #define DRV_NAME "pata_sil680"
#define DRV_VERSION "0.4.8" #define DRV_VERSION "0.4.9"
#define SIL680_MMIO_BAR 5 #define SIL680_MMIO_BAR 5
...@@ -195,7 +195,7 @@ static struct scsi_host_template sil680_sht = { ...@@ -195,7 +195,7 @@ static struct scsi_host_template sil680_sht = {
}; };
static struct ata_port_operations sil680_port_ops = { static struct ata_port_operations sil680_port_ops = {
.inherits = &ata_bmdma_port_ops, .inherits = &ata_bmdma32_port_ops,
.cable_detect = sil680_cable_detect, .cable_detect = sil680_cable_detect,
.set_piomode = sil680_set_piomode, .set_piomode = sil680_set_piomode,
.set_dmamode = sil680_set_dmamode, .set_dmamode = sil680_set_dmamode,
......
...@@ -1518,6 +1518,7 @@ extern void sata_pmp_error_handler(struct ata_port *ap); ...@@ -1518,6 +1518,7 @@ extern void sata_pmp_error_handler(struct ata_port *ap);
extern const struct ata_port_operations ata_sff_port_ops; extern const struct ata_port_operations ata_sff_port_ops;
extern const struct ata_port_operations ata_bmdma_port_ops; extern const struct ata_port_operations ata_bmdma_port_ops;
extern const struct ata_port_operations ata_bmdma32_port_ops;
/* PIO only, sg_tablesize and dma_boundary limits can be removed */ /* PIO only, sg_tablesize and dma_boundary limits can be removed */
#define ATA_PIO_SHT(drv_name) \ #define ATA_PIO_SHT(drv_name) \
...@@ -1545,6 +1546,8 @@ extern void ata_sff_exec_command(struct ata_port *ap, ...@@ -1545,6 +1546,8 @@ extern void ata_sff_exec_command(struct ata_port *ap,
const struct ata_taskfile *tf); const struct ata_taskfile *tf);
extern unsigned int ata_sff_data_xfer(struct ata_device *dev, extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw); unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw);
extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
unsigned char *buf, unsigned int buflen, int rw); unsigned char *buf, unsigned int buflen, int rw);
extern u8 ata_sff_irq_on(struct ata_port *ap); extern u8 ata_sff_irq_on(struct ata_port *ap);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment