wifi: rtl8xxxu: Add LED control code for RTL8188EU

By default the LED will blink when there is some activity.

This was tested with a TP-Link TL-WN725N.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/34d62bf5-3595-0c77-2ca7-be78555f765d@gmail.com

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8188e.c

@@ -1350,6 +1350,30 @@ static s8 rtl8188e_cck_rssi(struct rtl8xxxu_priv *priv, u8 cck_agc_rpt)
 	return rx_pwr_all;
 }
 
+static int rtl8188eu_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u8 ledcfg = rtl8xxxu_read8(priv, REG_LEDCFG2);
+
+	if (brightness == LED_OFF) {
+		ledcfg &= ~LEDCFG2_HW_LED_CONTROL;
+		ledcfg |= LEDCFG2_SW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE;
+	} else if (brightness == LED_ON) {
+		ledcfg &= ~(LEDCFG2_HW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE);
+		ledcfg |= LEDCFG2_SW_LED_CONTROL;
+	} else if (brightness == RTL8XXXU_HW_LED_CONTROL) {
+		ledcfg &= ~LEDCFG2_SW_LED_DISABLE;
+		ledcfg |= LEDCFG2_HW_LED_CONTROL | LEDCFG2_HW_LED_ENABLE;
+	}
+
+	rtl8xxxu_write8(priv, REG_LEDCFG2, ledcfg);
+
+	return 0;
+}
+
 static void rtl8188e_set_tx_rpt_timing(struct rtl8xxxu_ra_info *ra, u8 timing)
 {
 	u8 idx;
@@ -1851,6 +1875,7 @@ struct rtl8xxxu_fileops rtl8188eu_fops = {
 	.fill_txdesc = rtl8xxxu_fill_txdesc_v3,
 	.set_crystal_cap = rtl8188f_set_crystal_cap,
 	.cck_rssi = rtl8188e_cck_rssi,
+	.led_classdev_brightness_set = rtl8188eu_led_brightness_set,
 	.writeN_block_size = 128,
 	.rx_desc_size = sizeof(struct rtl8xxxu_rxdesc16),
 	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h

@@ -148,6 +148,10 @@
 #define  LEDCFG0_DPDT_SELECT		BIT(23)
 #define REG_LEDCFG1			0x004d
 #define REG_LEDCFG2			0x004e
+#define  LEDCFG2_HW_LED_CONTROL		BIT(1)
+#define  LEDCFG2_HW_LED_ENABLE		BIT(5)
+#define  LEDCFG2_SW_LED_DISABLE		BIT(3)
+#define  LEDCFG2_SW_LED_CONTROL   	BIT(5)
 #define  LEDCFG2_DPDT_SELECT		BIT(7)
 #define REG_LEDCFG3			0x004f
 #define REG_LEDCFG			REG_LEDCFG2