Commit 8749b427 authored by Roopa Prabhu's avatar Roopa Prabhu Committed by David S. Miller

enic: Add SRIOV support

This patch adds support to enable SRIOV on enic devices. Enic SRIOV VF's are dynamic vnics and will use the same driver code as dynamic vnics.
Signed-off-by: default avatarRoopa Prabhu <roprabhu@cisco.com>
Signed-off-by: default avatarSujith Sankar <ssujith@cisco.com>
Signed-off-by: default avatarChristian Benvenuti <benve@cisco.com>
Signed-off-by: default avatarDavid Wang <dwang2@cisco.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7a269ffa
......@@ -32,7 +32,7 @@
#define DRV_NAME "enic"
#define DRV_DESCRIPTION "Cisco VIC Ethernet NIC Driver"
#define DRV_VERSION "2.1.1.24"
#define DRV_VERSION "2.1.1.28"
#define DRV_COPYRIGHT "Copyright 2008-2011 Cisco Systems, Inc"
#define ENIC_BARS_MAX 6
......@@ -49,6 +49,10 @@ struct enic_msix_entry {
void *devid;
};
/* priv_flags */
#define ENIC_SRIOV_ENABLED (1 << 0)
/* enic port profile set flags */
#define ENIC_PORT_REQUEST_APPLIED (1 << 0)
#define ENIC_SET_REQUEST (1 << 1)
#define ENIC_SET_NAME (1 << 2)
......@@ -83,11 +87,15 @@ struct enic {
u8 mc_addr[ENIC_MULTICAST_PERFECT_FILTERS][ETH_ALEN];
u8 uc_addr[ENIC_UNICAST_PERFECT_FILTERS][ETH_ALEN];
unsigned int flags;
unsigned int priv_flags;
unsigned int mc_count;
unsigned int uc_count;
u32 port_mtu;
u32 rx_coalesce_usecs;
u32 tx_coalesce_usecs;
#ifdef CONFIG_PCI_IOV
u32 num_vfs;
#endif
struct enic_port_profile pp;
/* work queue cache line section */
......@@ -120,5 +128,6 @@ static inline struct device *enic_get_dev(struct enic *enic)
}
void enic_reset_addr_lists(struct enic *enic);
int enic_sriov_enabled(struct enic *enic);
#endif /* _ENIC_H_ */
......@@ -127,6 +127,11 @@ static int enic_is_dynamic(struct enic *enic)
return enic->pdev->device == PCI_DEVICE_ID_CISCO_VIC_ENET_DYN;
}
int enic_sriov_enabled(struct enic *enic)
{
return (enic->priv_flags & ENIC_SRIOV_ENABLED) ? 1 : 0;
}
static inline unsigned int enic_cq_rq(struct enic *enic, unsigned int rq)
{
return rq;
......@@ -2240,6 +2245,9 @@ static int __devinit enic_probe(struct pci_dev *pdev,
int using_dac = 0;
unsigned int i;
int err;
#ifdef CONFIG_PCI_IOV
int pos = 0;
#endif
/* Allocate net device structure and initialize. Private
* instance data is initialized to zero.
......@@ -2331,13 +2339,32 @@ static int __devinit enic_probe(struct pci_dev *pdev,
goto err_out_iounmap;
}
#ifdef CONFIG_PCI_IOV
/* Get number of subvnics */
pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
if (pos) {
pci_read_config_word(pdev, pos + PCI_SRIOV_TOTAL_VF,
(u16 *)&enic->num_vfs);
if (enic->num_vfs) {
err = pci_enable_sriov(pdev, enic->num_vfs);
if (err) {
dev_err(dev, "SRIOV enable failed, aborting."
" pci_enable_sriov() returned %d\n",
err);
goto err_out_vnic_unregister;
}
enic->priv_flags |= ENIC_SRIOV_ENABLED;
}
}
#endif
/* Issue device open to get device in known state
*/
err = enic_dev_open(enic);
if (err) {
dev_err(dev, "vNIC dev open failed, aborting\n");
goto err_out_vnic_unregister;
goto err_out_disable_sriov;
}
/* Setup devcmd lock
......@@ -2404,6 +2431,12 @@ static int __devinit enic_probe(struct pci_dev *pdev,
enic->port_mtu = enic->config.mtu;
(void)enic_change_mtu(netdev, enic->port_mtu);
#ifdef CONFIG_PCI_IOV
if (enic_is_dynamic(enic) && pdev->is_virtfn &&
is_zero_ether_addr(enic->mac_addr))
random_ether_addr(enic->mac_addr);
#endif
err = enic_set_mac_addr(netdev, enic->mac_addr);
if (err) {
dev_err(dev, "Invalid MAC address, aborting\n");
......@@ -2455,8 +2488,15 @@ static int __devinit enic_probe(struct pci_dev *pdev,
enic_dev_deinit(enic);
err_out_dev_close:
vnic_dev_close(enic->vdev);
err_out_disable_sriov:
#ifdef CONFIG_PCI_IOV
if (enic_sriov_enabled(enic)) {
pci_disable_sriov(pdev);
enic->priv_flags &= ~ENIC_SRIOV_ENABLED;
}
err_out_vnic_unregister:
vnic_dev_unregister(enic->vdev);
#endif
err_out_iounmap:
enic_iounmap(enic);
err_out_release_regions:
......@@ -2482,6 +2522,12 @@ static void __devexit enic_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
enic_dev_deinit(enic);
vnic_dev_close(enic->vdev);
#ifdef CONFIG_PCI_IOV
if (enic_sriov_enabled(enic)) {
pci_disable_sriov(pdev);
enic->priv_flags &= ~ENIC_SRIOV_ENABLED;
}
#endif
vnic_dev_unregister(enic->vdev);
enic_iounmap(enic);
pci_release_regions(pdev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment