arm64: dts: rockchip: Add clk_rtc_32k to Anbernic xx3 Devices

For the Anbernic devices to display properly, we need to specify the
clock frequency of the PLL_VPLL. Adding the parent clock in the
rk356x.dtsi requires us to update our clock definitions to accomplish
this.

Fixes: 64b69474 ("arm64: dts: rockchip: assign rate to clk_rtc_32k on rk356x")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20230327153547.821822-1-macroalpha82@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi

@@ -16,8 +16,10 @@ backlight: backlight {
 };
 
 &cru {
-	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
-	assigned-clock-rates = <1200000000>, <200000000>, <241500000>;
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <241500000>;
 };
 
 &gpio_keys_control {

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts

@@ -105,8 +105,10 @@ spk_amp: audio-amplifier {
 };
 
 &cru {
-	assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
-	assigned-clock-rates = <1200000000>, <200000000>, <500000000>;
+	assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+			  <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+	assigned-clock-rates = <32768>, <1200000000>,
+			       <200000000>, <500000000>;
 };
 
 &dsi_dphy0 {