Commit 879bc2d2 authored by Helge Deller's avatar Helge Deller

hil/parisc: Disable HIL driver when it gets stuck

When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full).  Usually one
will then have to reboot the machine because all you see is and endless
output of:
 Transaction add failed: transaction already queued?

In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.

Tested on a HP 730 and a HP 715/64 machine.
Signed-off-by: default avatarHelge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
parent faade098
......@@ -74,7 +74,7 @@ EXPORT_SYMBOL(hil_mlc_unregister);
static LIST_HEAD(hil_mlcs);
static DEFINE_RWLOCK(hil_mlcs_lock);
static struct timer_list hil_mlcs_kicker;
static int hil_mlcs_probe;
static int hil_mlcs_probe, hil_mlc_stop;
static void hil_mlcs_process(unsigned long unused);
static DECLARE_TASKLET_DISABLED_OLD(hil_mlcs_tasklet, hil_mlcs_process);
......@@ -702,9 +702,13 @@ static int hilse_donode(hil_mlc *mlc)
if (!mlc->ostarted) {
mlc->ostarted = 1;
mlc->opacket = pack;
mlc->out(mlc);
rc = mlc->out(mlc);
nextidx = HILSEN_DOZE;
write_unlock_irqrestore(&mlc->lock, flags);
if (rc) {
hil_mlc_stop = 1;
return 1;
}
break;
}
mlc->ostarted = 0;
......@@ -715,8 +719,13 @@ static int hilse_donode(hil_mlc *mlc)
case HILSE_CTS:
write_lock_irqsave(&mlc->lock, flags);
nextidx = mlc->cts(mlc) ? node->bad : node->good;
rc = mlc->cts(mlc);
nextidx = rc ? node->bad : node->good;
write_unlock_irqrestore(&mlc->lock, flags);
if (rc) {
hil_mlc_stop = 1;
return 1;
}
break;
default:
......@@ -780,6 +789,12 @@ static void hil_mlcs_process(unsigned long unused)
static void hil_mlcs_timer(struct timer_list *unused)
{
if (hil_mlc_stop) {
/* could not send packet - stop immediately. */
pr_warn(PREFIX "HIL seems stuck - Disabling HIL MLC.\n");
return;
}
hil_mlcs_probe = 1;
tasklet_schedule(&hil_mlcs_tasklet);
/* Re-insert the periodic task. */
......
......@@ -210,7 +210,7 @@ static int hp_sdc_mlc_cts(hil_mlc *mlc)
priv->tseq[2] = 1;
priv->tseq[3] = 0;
priv->tseq[4] = 0;
__hp_sdc_enqueue_transaction(&priv->trans);
return __hp_sdc_enqueue_transaction(&priv->trans);
busy:
return 1;
done:
......@@ -219,7 +219,7 @@ static int hp_sdc_mlc_cts(hil_mlc *mlc)
return 0;
}
static void hp_sdc_mlc_out(hil_mlc *mlc)
static int hp_sdc_mlc_out(hil_mlc *mlc)
{
struct hp_sdc_mlc_priv_s *priv;
......@@ -234,7 +234,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
do_data:
if (priv->emtestmode) {
up(&mlc->osem);
return;
return 0;
}
/* Shouldn't be sending commands when loop may be busy */
BUG_ON(down_trylock(&mlc->csem));
......@@ -296,7 +296,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
BUG_ON(down_trylock(&mlc->csem));
}
enqueue:
hp_sdc_enqueue_transaction(&priv->trans);
return hp_sdc_enqueue_transaction(&priv->trans);
}
static int __init hp_sdc_mlc_init(void)
......
......@@ -103,7 +103,7 @@ struct hilse_node {
/* Methods for back-end drivers, e.g. hp_sdc_mlc */
typedef int (hil_mlc_cts) (hil_mlc *mlc);
typedef void (hil_mlc_out) (hil_mlc *mlc);
typedef int (hil_mlc_out) (hil_mlc *mlc);
typedef int (hil_mlc_in) (hil_mlc *mlc, suseconds_t timeout);
struct hil_mlc_devinfo {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment