Commit 87d9fa64 authored by Simon Horman's avatar Simon Horman Committed by David S. Miller

dt-bindings: net: sh_eth: add R-Car Gen[12] fallback compatibility strings

Add fallback compatibility strings for R-Car Gen 1 and 2.

In the case of Renesas R-Car hardware we know that there are generations of
SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship
between IP blocks might be. For example, I believe that r8a7790 is older
than r8a7791 but that doesn't imply that the latter is a descendant of the
former or vice versa.

We can, however, by examining the documentation and behaviour of the
hardware at run-time observe that the current driver implementation appears
to be compatible with the IP blocks on SoCs within a given generation.

For the above reasons and convenience when enabling new SoCs a
per-generation fallback compatibility string scheme is being adopted for
drivers for Renesas SoCs.

Note that R-Car Gen2 and RZ/G1 have many compatible IP blocks.  The
approach that has been consistently taken for other IP blocks is to name
common code, compatibility strings and so on after R-Car Gen2.
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 7a0947e7
...@@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC ...@@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC
interface contains. interface contains.
Required properties: Required properties:
- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. - compatible: Must contain one or more of the following:
"renesas,gether-r8a7740" if the device is a part of R8A7740 SoC.
"renesas,ether-r8a7743" if the device is a part of R8A7743 SoC. "renesas,ether-r8a7743" if the device is a part of R8A7743 SoC.
"renesas,ether-r8a7745" if the device is a part of R8A7745 SoC. "renesas,ether-r8a7745" if the device is a part of R8A7745 SoC.
"renesas,ether-r8a7778" if the device is a part of R8A7778 SoC. "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC.
...@@ -14,6 +15,14 @@ Required properties: ...@@ -14,6 +15,14 @@ Required properties:
"renesas,ether-r8a7793" if the device is a part of R8A7793 SoC. "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC.
"renesas,ether-r8a7794" if the device is a part of R8A7794 SoC. "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,ether-r7s72100" if the device is a part of R7S72100 SoC. "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC.
"renesas,rcar-gen1-ether" for a generic R-Car Gen1 device.
"renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1
device.
When compatible with the generic version, nodes must list
the SoC-specific version corresponding to the platform
first followed by the generic version.
- reg: offset and length of (1) the E-DMAC/feLic register block (required), - reg: offset and length of (1) the E-DMAC/feLic register block (required),
(2) the TSU register block (optional). (2) the TSU register block (optional).
- interrupts: interrupt specifier for the sole interrupt. - interrupts: interrupt specifier for the sole interrupt.
...@@ -36,7 +45,8 @@ Optional properties: ...@@ -36,7 +45,8 @@ Optional properties:
Example (Lager board): Example (Lager board):
ethernet@ee700000 { ethernet@ee700000 {
compatible = "renesas,ether-r8a7790"; compatible = "renesas,ether-r8a7790",
"renesas,rcar-gen2-ether";
reg = <0 0xee700000 0 0x400>; reg = <0 0xee700000 0 0x400>;
interrupt-parent = <&gic>; interrupt-parent = <&gic>;
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment