[MTD] support driver model updates

Follow-on patch to the previous driver model patch for the MTD
framework.  This one makes various MTD drivers connect to the
driver model tree, so /sys/devices/virtual/mtd/* nodes are no
longer present ... mostly drivers used on boards I have handy.

Based on a patch from Kay Sievers.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

drivers/mtd/devices/m25p80.c

@@ -672,6 +672,8 @@ static int __devinit m25p_probe(struct spi_device *spi)
 		flash->mtd.erasesize = info->sector_size;
 	}
 
+	flash->mtd.dev.parent = &spi->dev;
+
 	dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name,
 			(long long)flash->mtd.size >> 10);
 

drivers/mtd/devices/mtd_dataflash.c

@@ -664,6 +664,8 @@ add_dataflash_otp(struct spi_device *spi, char *name,
 	device->write = dataflash_write;
 	device->priv = priv;
 
+	device->dev.parent = &spi->dev;
+
 	if (revision >= 'c')
 		otp_tag = otp_setup(device, revision);
 

drivers/mtd/maps/omap_nor.c

@@ -115,6 +115,8 @@ static int __init omapflash_probe(struct platform_device *pdev)
 	}
 	info->mtd->owner = THIS_MODULE;
 
+	info->mtd->dev.parent = &pdev->dev;
+
 #ifdef CONFIG_MTD_PARTITIONS
 	err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
 	if (err > 0)

drivers/mtd/maps/physmap.c

@@ -147,6 +147,7 @@ static int physmap_flash_probe(struct platform_device *dev)
 			devices_found++;
 		}
 		info->mtd[i]->owner = THIS_MODULE;
+		info->mtd[i]->dev.parent = &dev->dev;
 	}
 
 	if (devices_found == 1) {

drivers/mtd/maps/plat-ram.c

@@ -224,6 +224,7 @@ static int platram_probe(struct platform_device *pdev)
 	}
 
 	info->mtd->owner = THIS_MODULE;
+	info->mtd->dev.parent = &pdev->dev;
 
 	platram_setrw(info, PLATRAM_RW);
 

drivers/mtd/nand/davinci_nand.c

@@ -343,6 +343,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
 	info->mtd.name		= dev_name(&pdev->dev);
 	info->mtd.owner		= THIS_MODULE;
 
+	info->mtd.dev.parent	= &pdev->dev;
+
 	info->chip.IO_ADDR_R	= vaddr;
 	info->chip.IO_ADDR_W	= vaddr;
 	info->chip.chip_delay	= 0;

drivers/mtd/nand/mxc_nand.c

@@ -866,6 +866,7 @@ static int __init mxcnd_probe(struct platform_device *pdev)
 	mtd = &host->mtd;
 	mtd->priv = this;
 	mtd->owner = THIS_MODULE;
+	mtd->dev.parent = &pdev->dev;
 
 	/* 50 us command delay time */
 	this->chip_delay = 5;

drivers/mtd/onenand/omap2.c

@@ -676,6 +676,8 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	c->mtd.priv = &c->onenand;
 	c->mtd.owner = THIS_MODULE;
 
+	c->mtd.dev.parent = &pdev->dev;
+
 	if (c->dma_channel >= 0) {
 		struct onenand_chip *this = &c->onenand;