ASoC: rt1011: add i2s reference control for rt1011

Add i2s reference control for rt1011 amp.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20210906101208.11585-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt1011.c

@@ -1311,6 +1311,57 @@ static int rt1011_r0_load_info(struct snd_kcontrol *kcontrol,
 	.put = rt1011_r0_load_mode_put \
 }
 
+static const char * const rt1011_i2s_ref[] = {
+	"None", "Left Channel", "Right Channel"
+};
+
+static SOC_ENUM_SINGLE_DECL(rt1011_i2s_ref_enum, 0, 0,
+	rt1011_i2s_ref);
+
+static int rt1011_i2s_ref_put(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1011_priv *rt1011 =
+		snd_soc_component_get_drvdata(component);
+	int i2s_ref_ch = ucontrol->value.integer.value[0];
+
+	switch (i2s_ref_ch) {
+	case RT1011_I2S_REF_LEFT_CH:
+		regmap_write(rt1011->regmap, RT1011_TDM_TOTAL_SET, 0x0240);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_2, 0x8);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_1, 0x1022);
+		regmap_write(rt1011->regmap, RT1011_ADCDAT_OUT_SOURCE, 0x4);
+		break;
+	case RT1011_I2S_REF_RIGHT_CH:
+		regmap_write(rt1011->regmap, RT1011_TDM_TOTAL_SET, 0x0240);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_2, 0x8);
+		regmap_write(rt1011->regmap, RT1011_TDM1_SET_1, 0x10a2);
+		regmap_write(rt1011->regmap, RT1011_ADCDAT_OUT_SOURCE, 0x4);
+		break;
+	default:
+		dev_info(component->dev, "I2S Reference: Do nothing\n");
+	}
+
+	rt1011->i2s_ref = ucontrol->value.integer.value[0];
+
+	return 0;
+}
+
+static int rt1011_i2s_ref_get(struct snd_kcontrol *kcontrol,
+		struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *component =
+		snd_soc_kcontrol_component(kcontrol);
+	struct rt1011_priv *rt1011 =
+		snd_soc_component_get_drvdata(component);
+
+	ucontrol->value.integer.value[0] = rt1011->i2s_ref;
+
+	return 0;
+}
+
 static const struct snd_kcontrol_new rt1011_snd_controls[] = {
 	/* I2S Data In Selection */
 	SOC_ENUM("DIN Source", rt1011_din_source_enum),
@@ -1349,6 +1400,9 @@ static const struct snd_kcontrol_new rt1011_snd_controls[] = {
 	/* R0 temperature */
 	SOC_SINGLE("R0 Temperature", RT1011_STP_INITIAL_RESISTANCE_TEMP,
 		2, 255, 0),
+	/* I2S Reference */
+	SOC_ENUM_EXT("I2S Reference", rt1011_i2s_ref_enum,
+		rt1011_i2s_ref_get, rt1011_i2s_ref_put),
 };
 
 static int rt1011_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,

sound/soc/codecs/rt1011.h

@@ -654,6 +654,12 @@ enum {
 	RT1011_AIFS
 };
 
+enum {
+	RT1011_I2S_REF_NONE,
+	RT1011_I2S_REF_LEFT_CH,
+	RT1011_I2S_REF_RIGHT_CH,
+};
+
 /* BiQual & DRC related settings */
 #define RT1011_BQ_DRC_NUM 128
 struct rt1011_bq_drc_params {
@@ -692,6 +698,7 @@ struct rt1011_priv {
 	unsigned int r0_reg, cali_done;
 	unsigned int r0_calib, temperature_calib;
 	int recv_spk_mode;
+	unsigned int i2s_ref;
 };
 
 #endif		/* end of _RT1011_H_ */