Commit 87f49eb0 authored by Steven Cole's avatar Steven Cole Committed by Jeff Garzik

Add some missing help texts to drivers/net/Config.help.

parent 92e2b49f
...@@ -3,6 +3,10 @@ CONFIG_BAGETLANCE ...@@ -3,6 +3,10 @@ CONFIG_BAGETLANCE
MIPS-32-based Baget embedded system. This chipset is better known MIPS-32-based Baget embedded system. This chipset is better known
via the NE2100 cards. via the NE2100 cards.
CONFIG_LASI_82596
Say Y here to support the on-board Intel 82596 ethernet controller
built into Hewlett-Packard PA-RISC machines.
CONFIG_MIPS_JAZZ_SONIC CONFIG_MIPS_JAZZ_SONIC
This is the driver for the onboard card of MIPS Magnum 4000, This is the driver for the onboard card of MIPS Magnum 4000,
Acer PICA, Olivetti M700-10 and a few other identical OEM systems. Acer PICA, Olivetti M700-10 and a few other identical OEM systems.
...@@ -214,6 +218,12 @@ CONFIG_PPPOE ...@@ -214,6 +218,12 @@ CONFIG_PPPOE
pppd, along with binaries of a patched pppd package can be found at: pppd, along with binaries of a patched pppd package can be found at:
<http://www.shoshin.uwaterloo.ca/~mostrows/>. <http://www.shoshin.uwaterloo.ca/~mostrows/>.
CONFIG_PPPOATM
Support PPP (Point to Point Protocol) encapsulated in ATM frames.
This implementation does not yet comply with section 8 of RFC2364,
which can lead to bad results if the ATM peer loses state and
changes its encapsulation unilaterally.
CONFIG_NET_RADIO CONFIG_NET_RADIO
Support for wireless LANs and everything having to do with radio, Support for wireless LANs and everything having to do with radio,
but not with amateur radio or FM broadcasting. but not with amateur radio or FM broadcasting.
...@@ -853,6 +863,10 @@ CONFIG_LANCE ...@@ -853,6 +863,10 @@ CONFIG_LANCE
say M here and read <file:Documentation/modules.txt>. This is say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called lance.o. recommended. The module will be called lance.o.
CONFIG_MIPS_AU1000_ENET
If you have an Alchemy Semi AU1000 ethernet controller
on an SGI MIPS system, say Y. Otherwise, say N.
CONFIG_SGI_IOC3_ETH CONFIG_SGI_IOC3_ETH
If you have a network (Ethernet) card of this type, say Y and read If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from the Ethernet-HOWTO, available from
...@@ -1326,6 +1340,24 @@ CONFIG_DE4X5 ...@@ -1326,6 +1340,24 @@ CONFIG_DE4X5
module, say M here and read <file:Documentation/modules.txt> as well module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>. as <file:Documentation/networking/net-modules.txt>.
CONFIG_DE2104X
This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip
21040 (Tulip series) chips. Some LinkSys PCI cards are
of this type. (If your card is NOT SMC EtherPower 10/100 PCI
(smc9332dst), you can also try the driver for "Generic DECchip"
cards, above. However, most people with a network card of this type
will say Y here.) Do read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. More specific
information is contained in
<file:Documentation/DocBook/tulip-user.tmpl>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tulip.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
CONFIG_TULIP CONFIG_TULIP
This driver is developed for the SMC EtherPower series Ethernet This driver is developed for the SMC EtherPower series Ethernet
cards and also works with cards based on the DECchip cards and also works with cards based on the DECchip
...@@ -1344,6 +1376,20 @@ CONFIG_TULIP ...@@ -1344,6 +1376,20 @@ CONFIG_TULIP
module, say M here and read <file:Documentation/modules.txt> as well module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>. as <file:Documentation/networking/net-modules.txt>.
CONFIG_TULIP_MWI
This configures your Tulip card specifically for the card and
system cache line size type you are using.
This is experimental code, not yet tested on many boards.
If unsure, say N.
CONFIG_TULIP_MMIO
Use PCI shared memory for the NIC registers, rather than going through
the Tulip's PIO (programmed I/O ports). Faster, but could produce
obscure bugs if your mainboard has memory controller timing issues.
If in doubt, say N.
CONFIG_DGRS CONFIG_DGRS
This is support for the Digi International RightSwitch series of This is support for the Digi International RightSwitch series of
PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6 PCI/EISA Ethernet switch cards. These include the SE-4 and the SE-6
...@@ -1374,6 +1420,11 @@ CONFIG_FEALNX ...@@ -1374,6 +1420,11 @@ CONFIG_FEALNX
cards. Specifications and data at cards. Specifications and data at
<http://www.myson.com.hk/mtd/datasheet/>. <http://www.myson.com.hk/mtd/datasheet/>.
CONFIG_LP486E
Say Y here to support the 82596-based on-board Ethernet controller
for the Panther motherboard, which is one of the two shipped in the
Intel Professional Workstation.
CONFIG_ETH16I CONFIG_ETH16I
If you have a network (Ethernet) card of this type, say Y and read If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from the Ethernet-HOWTO, available from
...@@ -1413,6 +1464,16 @@ CONFIG_VIA_RHINE ...@@ -1413,6 +1464,16 @@ CONFIG_VIA_RHINE
a module, say M here and read <file:Documentation/modules.txt> as a module, say M here and read <file:Documentation/modules.txt> as
well as <file:Documentation/networking/net-modules.txt>. well as <file:Documentation/networking/net-modules.txt>.
CONFIG_VIA_RHINE_MMIO
This instructs the driver to use PCI shared memory (MMIO) instead of
programmed I/O ports (PIO). Enabling this gives an improvement in
processing time in parts of the driver.
It is not known if this works reliably on all "rhine" based cards,
but it has been tested successfully on some DFE-530TX adapters.
If unsure, say N.
CONFIG_DM9102 CONFIG_DM9102
This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from This driver is for DM9102(A)/DM9132/DM9801 compatible PCI cards from
Davicom (<http://www.davicom.com.tw/>). If you have such a network Davicom (<http://www.davicom.com.tw/>). If you have such a network
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment