Merge tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC host fixes from Ulf Hansson:

 - sdhci: Fix performance regression with auto CMD auto select

 - sdhci-of-esdhc: Fix initialization for eMMC HS400 mode

 - sdhci-of-esdhc: Fix timeout bug for tuning commands

* tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-esdhc: make sure delay chain locked for HS400
  mmc: sdhci-of-esdhc: set timeout to max before tuning
  mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is true

drivers/mmc/host/sdhci-esdhc.h

@@ -5,6 +5,7 @@
  * Copyright (c) 2007 Freescale Semiconductor, Inc.
  * Copyright (c) 2009 MontaVista Software, Inc.
  * Copyright (c) 2010 Pengutronix e.K.
+ * Copyright 2020 NXP
  *   Author: Wolfram Sang <kernel@pengutronix.de>
  */
 
@@ -88,6 +89,7 @@
 /* DLL Config 0 Register */
 #define ESDHC_DLLCFG0			0x160
 #define ESDHC_DLL_ENABLE		0x80000000
+#define ESDHC_DLL_RESET			0x40000000
 #define ESDHC_DLL_FREQ_SEL		0x08000000
 
 /* DLL Config 1 Register */

drivers/mmc/host/sdhci-of-esdhc.c

@@ -4,6 +4,7 @@
  *
  * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
  * Copyright (c) 2009 MontaVista Software, Inc.
+ * Copyright 2020 NXP
  *
  * Authors: Xiaobo Xie <X.Xie@freescale.com>
  *	    Anton Vorontsov <avorontsov@ru.mvista.com>
@@ -19,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/ktime.h>
 #include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include "sdhci-pltfm.h"
@@ -743,6 +745,21 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 		if (host->mmc->actual_clock == MMC_HS200_MAX_DTR)
 			temp |= ESDHC_DLL_FREQ_SEL;
 		sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+		temp |= ESDHC_DLL_RESET;
+		sdhci_writel(host, temp, ESDHC_DLLCFG0);
+		udelay(1);
+		temp &= ~ESDHC_DLL_RESET;
+		sdhci_writel(host, temp, ESDHC_DLLCFG0);
+
+		/* Wait max 20 ms */
+		if (read_poll_timeout(sdhci_readl, temp,
+				      temp & ESDHC_DLL_STS_SLV_LOCK,
+				      10, 20000, false,
+				      host, ESDHC_DLLSTAT0))
+			pr_err("%s: timeout for delay chain lock.\n",
+			       mmc_hostname(host->mmc));
+
 		temp = sdhci_readl(host, ESDHC_TBCTL);
 		sdhci_writel(host, temp | ESDHC_HS400_WNDW_ADJUST, ESDHC_TBCTL);
 
@@ -1052,6 +1069,17 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	esdhc_tuning_block_enable(host, true);
 
+	/*
+	 * The eSDHC controller takes the data timeout value into account
+	 * during tuning. If the SD card is too slow sending the response, the
+	 * timer will expire and a "Buffer Read Ready" interrupt without data
+	 * is triggered. This leads to tuning errors.
+	 *
+	 * Just set the timeout to the maximum value because the core will
+	 * already take care of it in sdhci_send_tuning().
+	 */
+	sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
+
 	hs400_tuning = host->flags & SDHCI_HS400_TUNING;
 
 	do {

drivers/mmc/host/sdhci.c

@@ -1384,9 +1384,11 @@ static inline void sdhci_auto_cmd_select(struct sdhci_host *host,
 	/*
 	 * In case of Version 4.10 or later, use of 'Auto CMD Auto
 	 * Select' is recommended rather than use of 'Auto CMD12
-	 * Enable' or 'Auto CMD23 Enable'.
+	 * Enable' or 'Auto CMD23 Enable'. We require Version 4 Mode
+	 * here because some controllers (e.g sdhci-of-dwmshc) expect it.
 	 */
-	if (host->version >= SDHCI_SPEC_410 && (use_cmd12 || use_cmd23)) {
+	if (host->version >= SDHCI_SPEC_410 && host->v4_mode &&
+	    (use_cmd12 || use_cmd23)) {
 		*mode |= SDHCI_TRNS_AUTO_SEL;
 
 		ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);