Merge branch 'for-rmk/samsung5' of git://git.fluff.org/bjdooks/linux into devel-stable

Conflicts:
	arch/arm/Kconfig
	arch/arm/Makefile

arch/arm/Kconfig

@@ -631,9 +631,24 @@ config ARCH_S3C2410
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
+	select PLAT_SAMSUNG
+	select CPU_V6
 	select GENERIC_GPIO
+	select ARM_VIC
 	select HAVE_CLK
+	select NO_IOPORT
 	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select SAMSUNG_CLKSRC
+	select SAMSUNG_IRQ_VIC_TIMER
+	select SAMSUNG_IRQ_UART
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
+	select USB_ARCH_HAS_OHCI
+	select SAMSUNG_GPIOLIB_4BIT
 	help
 	  Samsung S3C64XX series based systems
 
@@ -645,6 +660,14 @@ config ARCH_S5P6440
 	help
 	  Samsung S5P6440 CPU based systems
 
+config ARCH_S5P6442
+	bool "Samsung S5P6442"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S5P6442 CPU based systems
+
 config ARCH_S5PC1XX
 	bool "Samsung S5PC1XX"
 	select GENERIC_GPIO
@@ -653,6 +676,15 @@ config ARCH_S5PC1XX
 	help
 	  Samsung S5PC1XX series based systems
 
+config ARCH_S5PV210
+	bool "Samsung S5PV210/S5PC110"
+	select CPU_V7
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select ARM_L1_CACHE_SHIFT_6
+	help
+	  Samsung S5PV210/S5PC110 series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -816,8 +848,6 @@ source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
 source "arch/arm/plat-s5p/Kconfig"
 source "arch/arm/plat-s5pc1xx/Kconfig"
 
@@ -826,25 +856,27 @@ source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"
 source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
 source "arch/arm/mach-s3c2443/Kconfig"
 endif
 
 if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
 endif
 
 source "arch/arm/mach-s5p6440/Kconfig"
 
-source "arch/arm/mach-shmobile/Kconfig"
-
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6442/Kconfig"
 
 if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
 source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"
@@ -1092,7 +1124,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100

arch/arm/Kconfig.debug

@@ -117,7 +117,7 @@ config DEBUG_CLPS711X_UART2
 	  cause the debug messages to appear on the first serial port.
 
 config DEBUG_S3C_UART
-	depends on PLAT_S3C
+	depends on PLAT_SAMSUNG
 	int "S3C UART to use for low-level debug"
 	default "0"
 	help

arch/arm/Makefile

@@ -160,11 +160,13 @@ machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008
 machine-$(CONFIG_ARCH_PXA)		:= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		:= realview
 machine-$(CONFIG_ARCH_RPC)		:= rpc
-machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S3C64XX)		:= s3c64xx
 machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
+machine-$(CONFIG_ARCH_S5P6442)		:= s5p6442
 machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
+machine-$(CONFIG_ARCH_S5PV210)		:= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
@@ -180,15 +182,15 @@ machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
-plat-$(CONFIG_PLAT_S5P)		:= s5p samsung s3c
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx samsung
+plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/mach-s3c2410/dma.c

@@ -21,7 +21,7 @@
 #include <mach/dma.h>
 
 #include <plat/cpu.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>

arch/arm/plat-s3c24xx/include/plat/pm-core.h → arch/arm/mach-s3c2410/include/mach/pm-core.h

-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+/* linux/arch/arm/mach-s3c2410/include/pm-core.h
  *
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>

arch/arm/mach-s3c2410/include/mach/regs-gpio.h

@@ -406,31 +406,31 @@
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
 
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2443_GPE6_AC_SDI    (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2443_GPE7_AC_SDO    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2443_GPE8_AC_SYNC   (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)

arch/arm/plat-s3c/include/mach/timex.h → arch/arm/mach-s3c2410/include/mach/timex.h

@@ -19,8 +19,6 @@
  * for the time conversion functions to/from jiffies is acceptable.
 */
 
-
 #define CLOCK_TICK_RATE 12000000
 
-
 #endif /* __ASM_ARCH_TIMEX_H */

arch/arm/plat-s3c/include/mach/vmalloc.h → arch/arm/mach-s3c2410/include/mach/vmalloc.h

-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
  *
  * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
  *

arch/arm/mach-s3c2412/dma.c

@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>

arch/arm/mach-s3c2440/Kconfig

@@ -15,14 +15,67 @@ config CPU_S3C2440
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
+config CPU_S3C2442
+	bool
+	depends on ARCH_S3C2410
+	select CPU_ARM920T
+	select S3C2410_CLOCK
+	select S3C2410_GPIO
+	select S3C2410_PM if PM
+	select CPU_S3C244X
+	select CPU_LLSERIAL_S3C2440
+	help
+	  Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+	bool
+	depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+	help
+	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C2440_DMA
 	bool
 	depends on ARCH_S3C2410 && CPU_S3C24405B
 	help
 	  Support for S3C2440 specific DMA code5A
 
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
@@ -37,6 +90,18 @@ config MACH_ANUBIS
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
 
+config MACH_NEO1973_GTA02
+	bool "Openmoko GTA02 / Freerunner phone"
+	select CPU_S3C2442
+	select MFD_PCF50633
+	select PCF50633_GPIO
+	select I2C
+	select POWER_SUPPLY
+	select MACH_NEO1973
+	select S3C2410_PWM
+	help
+	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
 	select CPU_S3C2440
@@ -94,11 +159,14 @@ config MACH_NEXCODER_2440
 
 config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
-	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
 	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
+config SMDK2440_CPU2442
+	bool "SMDM2440 with S3C2442 CPU module"
+	select CPU_S3C2442
+
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440

arch/arm/mach-s3c2440/Makefile

@@ -10,10 +10,20 @@ obj-n				:=
 obj-				:=
 
 obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+
 obj-$(CONFIG_CPU_S3C2440)	+= irq.o
 obj-$(CONFIG_CPU_S3C2440)	+= clock.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma.o
 
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 # Machine support
 
 obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
@@ -23,6 +33,7 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
 
 # extra machine support
 

arch/arm/mach-s3c2440/dma.c

@@ -20,7 +20,7 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>

arch/arm/mach-s3c2440/dsc.c

@@ -28,7 +28,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 
 int s3c2440_set_dsc(unsigned int pin, unsigned int value)
 {

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -41,7 +41,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c2440/mach-smdk2440.c

@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c2440/s3c2440.c

@@ -29,9 +29,9 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <plat/s3c2440.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
 
 static struct sys_device s3c2440_sysdev = {
 	.cls		= &s3c2440_sysclass,

arch/arm/mach-s3c2442/clock.c → arch/arm/mach-s3c2440/s3c2442.c

-/* linux/arch/arm/mach-s3c2442/clock.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
  *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C2442 Clock support
+ * S3C2442 core and lock support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -151,3 +151,15 @@ static __init int s3c2442_clk_init(void)
 }
 
 arch_initcall(s3c2442_clk_init);
+
+
+static struct sys_device s3c2442_sysdev = {
+	.cls		= &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+	printk("S3C2442: Initialising architecture\n");
+
+	return sysdev_register(&s3c2442_sysdev);
+}

arch/arm/plat-s3c24xx/s3c244x.c → arch/arm/mach-s3c2440/s3c244x.c

@@ -38,8 +38,7 @@
 #include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>

arch/arm/mach-s3c2442/Kconfig

-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2442
-	bool
-	depends on ARCH_S3C2410
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_GPIO
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	depends on ARCH_S3C2440
-	select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu

arch/arm/mach-s3c2442/Makefile

-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C2442)	+= clock.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
-# Machine support
-

arch/arm/mach-s3c2443/dma.c

@@ -20,7 +20,7 @@
 
 #include <mach/dma.h>
 
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
 #include <plat/cpu.h>
 
 #include <plat/regs-serial.h>

arch/arm/mach-s3c2443/mach-smdk2443.c

@@ -40,7 +40,7 @@
 #include <plat/iic.h>
 
 #include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
@@ -106,6 +106,9 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_hsmmc0,
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	&s3c_device_ac97,
+#endif
 };
 
 static void __init smdk2443_map_io(void)
@@ -118,6 +121,11 @@ static void __init smdk2443_map_io(void)
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+	s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
+#endif
+
 	platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
 	smdk_machine_init();
 }

arch/arm/plat-s3c/include/mach/io.h → arch/arm/mach-s3c24a0/include/mach/io.h

-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c24a0/include/mach/io.h
  *
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben-linux@fluff.org>
  *
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C24A0
  */
 
 #ifndef __ASM_ARM_ARCH_IO_H

arch/arm/mach-s3c6400/Kconfig

-# Copyright 2008 Openmoko, Inc.
-#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
-	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
-	help
-	  Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
-	bool
-	help
-	  Internal configuration for default SDHCI
-	  setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
-       bool "SMDK6400"
-	select CPU_S3C6400
-	select S3C_DEV_HSMMC
-	select S3C_DEV_NAND
-	select S3C6400_SETUP_SDHCI
-	help
-	  Machine support for the Samsung SMDK6400

arch/arm/mach-s3c6400/Makefile

-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o

arch/arm/mach-s3c6400/include/mach/dma.h

-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS	(16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
-	/* DMA0/SDMA0 */
-	DMACH_UART0 = 0,
-	DMACH_UART0_SRC2,
-	DMACH_UART1,
-	DMACH_UART1_SRC2,
-	DMACH_UART2,
-	DMACH_UART2_SRC2,
-	DMACH_UART3,
-	DMACH_UART3_SRC2,
-	DMACH_PCM0_TX,
-	DMACH_PCM0_RX,
-	DMACH_I2S0_OUT,
-	DMACH_I2S0_IN,
-	DMACH_SPI0_TX,
-	DMACH_SPI0_RX,
-	DMACH_HSI_I2SV40_TX,
-	DMACH_HSI_I2SV40_RX,
-
-	/* DMA1/SDMA1 */
-	DMACH_PCM1_TX = 16,
-	DMACH_PCM1_RX,
-	DMACH_I2S1_OUT,
-	DMACH_I2S1_IN,
-	DMACH_SPI1_TX,
-	DMACH_SPI1_RX,
-	DMACH_AC97_PCMOUT,
-	DMACH_AC97_PCMIN,
-	DMACH_AC97_MICIN,
-	DMACH_PWM,
-	DMACH_IRDA,
-	DMACH_EXTERNAL,
-	DMACH_RES1,
-	DMACH_RES2,
-	DMACH_SECURITY_RX,	/* SDMA1 only */
-	DMACH_SECURITY_TX,	/* SDMA1 only */
-	DMACH_MAX		/* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
-	return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR		(1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6400/include/mach/irqs.h

-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */

arch/arm/mach-s3c6410/Makefile

-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y				:=
-obj-m				:=
-obj-n				:=
-obj-				:=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410)	+= cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o

arch/arm/mach-s3c6410/setup-sdhci.c

-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
-	[0] = "hsmmc",
-	[1] = "hsmmc",
-	[2] = "mmc_bus",
-	/* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
-				    void __iomem *r,
-				    struct mmc_ios *ios,
-				    struct mmc_card *card)
-{
-	u32 ctrl2, ctrl3;
-
-	/* don't need to alter anything acording to card-type */
-
-	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
-	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
-		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
-		  S3C_SDHCI_CTRL2_ENFBCLKRX |
-		  S3C_SDHCI_CTRL2_DFCNT_NONE |
-		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
-	if (ios->clock < 25 * 1000000)
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
-			 S3C_SDHCI_CTRL3_FCSEL2 |
-			 S3C_SDHCI_CTRL3_FCSEL1 |
-			 S3C_SDHCI_CTRL3_FCSEL0);
-	else
-		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
-	printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
-	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
-	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-

arch/arm/mach-s3c6410/Kconfig → arch/arm/mach-s3c64xx/Kconfig

 # Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
 # Licensed under GPLv2
 
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+	bool
+	depends on ARCH_S3C64XX
+	default y
+	help
+	  Base platform code for any Samsung S3C64XX device
+
+
 # Configuration options for the S3C6410 CPU
 
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
 config CPU_S3C6410
 	bool
-	select CPU_S3C6400_INIT
-	select CPU_S3C6400_CLOCK
 	help
 	  Enable S3C6410 CPU support
 
-config S3C6410_SETUP_SDHCI
-	bool
+config S3C64XX_DMA
+	bool "S3C64XX DMA"
+	select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_SDHCI_GPIO
+	bool
 	help
-	  Internal helper functions for S3C6410 based SDHCI systems
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	select CPU_S3C6400
+	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
+	select S3C64XX_SETUP_SDHCI
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
 
 config MACH_ANW6410
 	bool "A&W6410"
@@ -35,7 +91,7 @@ config MACH_SMDK6410
 	select S3C_DEV_FB
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
-	select S3C6410_SETUP_SDHCI
+	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_FB_24BPP
 	help
@@ -58,7 +114,7 @@ config SMDK6410_SD_CH0
 	  at least some SMDK6410 boards come with the
 	  resistors fitted so that the card detects for
 	  channels 0 and 1 are the same.
-       
+
 config SMDK6410_SD_CH1
 	bool "Use channel 1 only"
 	depends on MACH_SMDK6410
@@ -88,6 +144,21 @@ config SMDK6410_WM1190_EV1
 	  detected at runtime so the the resulting kernel can be used
 	  with or without the 1190-EV1 fitted.
 
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	select REGULATOR
+	select REGULATOR_WM831X
+	select S3C24XX_GPIO_EXTRA64
+	select MFD_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
 config MACH_NCP
 	bool "NCP"
 	select CPU_S3C6410

arch/arm/plat-s3c64xx/Makefile → arch/arm/mach-s3c64xx/Makefile

-# arch/arm/plat-s3c64xx/Makefile
+# arch/arm/mach-s3c64xx/Makefile
 #
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
@@ -7,44 +7,56 @@
 
 obj-y				:=
 obj-m				:=
-obj-n				:= dummy.o
+obj-n				:=
 obj-				:=
 
 # Core files
-
-obj-y				+= dev-uart.o
-obj-y				+= dev-rtc.o
 obj-y				+= cpu.o
-obj-y				+= irq.o
-obj-y				+= irq-eint.o
 obj-y				+= clock.o
 obj-y				+= gpiolib.o
 
-# CPU support
+# Core support for S3C6400 system
 
-obj-$(CONFIG_CPU_S3C6400_INIT)	+= s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK)	+= s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
+obj-$(CONFIG_CPU_S3C6400)	+= s3c6400.o
+obj-$(CONFIG_CPU_S3C6410)	+= s3c6410.o
+
+obj-y				+= irq.o
+obj-y				+= irq-eint.o
 
-# PM support
+# CPU frequency scaling
 
-obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_PM)		+= irq-pm.o
+obj-$(CONFIG_CPU_FREQ_S3C64XX)  += cpufreq.o
 
 # DMA support
 
 obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 
-# ADC support
-
-obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
-
 # Device setup
 
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
 obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
-obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o
+
+# PM
+
+obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_PM)		+= sleep.o
+obj-$(CONFIG_PM)		+= irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
+
+# device support
+
+obj-y				+= dev-uart.o
+obj-y				+= dev-rtc.o
+obj-$(CONFIG_S3C_ADC)		+= dev-adc.o
+obj-$(CONFIG_SND_S3C24XX_SOC)	+= dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o

arch/arm/plat-s3c64xx/s3c6400-clock.c → arch/arm/mach-s3c64xx/clock.c

-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
+/* linux/arch/arm/plat-s3c64xx/clock.c
  *
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
- * S3C6400 based common clock support
+ * S3C64XX Base clock support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -14,24 +14,24 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/err.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <plat/cpu-freq.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
 
-#include <plat/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
 #include <plat/clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
 
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
@@ -49,6 +49,259 @@ static struct clk clk_ext_xtal_mux = {
 #define clk_fout_mpll	clk_mpll
 #define clk_fout_epll	clk_epll
 
+struct clk clk_h2 = {
+	.name		= "hclk2",
+	.id		= -1,
+	.rate		= 0,
+};
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S3C64XX_OTHERS);
+	if (enable)
+		val |= S3C64XX_OTHERS_USBMASK;
+	else
+		val &= ~S3C64XX_OTHERS_USBMASK;
+
+	__raw_writel(val, S3C64XX_OTHERS);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+	return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_h,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_TSADC,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIC,
+	}, {
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_IIS1,
+	}, {
+#ifdef CONFIG_CPU_S3C6410
+		.name		= "iis",
+		.id		= -1,  /* There's only one IISv4 port */
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C6410_CLKCON_PCLK_IIS2,
+	}, {
+#endif
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_SPI1,
+	}, {
+		.name		= "spi_48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI0_48,
+	}, {
+		.name		= "spi_48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_SPI1_48,
+	}, {
+		.name		= "48m",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC0_48,
+	}, {
+		.name		= "48m",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC1_48,
+	}, {
+		.name		= "48m",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s3c64xx_sclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_SCLK_MMC2_48,
+	}, {
+		.name		= "dma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA0,
+	}, {
+		.name		= "dma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_DMA1,
+	},
+};
+
+static struct clk init_clocks[] = {
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_LCD,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_GPIO,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_UHOST,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s3c64xx_hclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_HCLK_HSMMC2,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_PWM,
+	}, {
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_UART3,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s3c64xx_pclk_ctrl,
+		.ctrlbit	= S3C_CLKCON_PCLK_RTC,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_WDT,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.ctrlbit	= S3C_CLKCON_PCLK_AC97,
+	}
+};
+
+
 static struct clk clk_fout_apll = {
 	.name		= "fout_apll",
 	.id		= -1,
@@ -492,7 +745,7 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 		s3c_set_clksrc(&clksrcs[ptr], true);
 }
 
-static struct clk *clks[] __initdata = {
+static struct clk *clks1[] __initdata = {
 	&clk_ext_xtal_mux,
 	&clk_iis_cd0,
 	&clk_iis_cd1,
@@ -503,19 +756,29 @@ static struct clk *clks[] __initdata = {
 	&clk_arm,
 };
 
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_h2,
+};
+
 /**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
  *
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
  *
  * This call does not setup the clocks, which is left to the
  * s3c6400_setup_clocks() call which may be needed by the cpufreq
  * or resume code to re-set the clocks if the bootloader has changed
  * them.
  */
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
+void __init s3c64xx_register_clocks(unsigned long xtal, 
+				    unsigned armclk_divlimit)
 {
 	struct clk *clkp;
 	int ret;
@@ -523,14 +786,24 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 
 	armclk_mask = armclk_divlimit;
 
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
+	s3c24xx_register_baseclocks(xtal);
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
 		ret = s3c24xx_register_clock(clkp);
 		if (ret < 0) {
 			printk(KERN_ERR "Failed to register clock %s (%d)\n",
 			       clkp->name, ret);
 		}
+
+		(clkp->enable)(clkp, 0);
 	}
 
+	s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+	s3c_pwmclk_init();
 }

arch/arm/plat-s3c64xx/cpu.c → arch/arm/mach-s3c64xx/cpu.c

@@ -33,8 +33,8 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
 
 /* table of supported CPUs */
 
@@ -129,6 +129,12 @@ static struct sys_device s3c64xx_sysdev = {
 	.cls	= &s3c64xx_sysclass,
 };
 
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
 
 /* read cpu identification code */
 

arch/arm/plat-s3c64xx/dev-audio.c → arch/arm/mach-s3c64xx/dev-audio.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
@@ -19,12 +20,13 @@
 
 #include <plat/devs.h>
 #include <plat/audio.h>
-#include <plat/gpio-bank-c.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-bank-h.h>
 #include <plat/gpio-cfg.h>
 
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
 static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
@@ -254,3 +256,80 @@ struct platform_device s3c64xx_device_pcm1 = {
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
+
+	return 0;
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
+	s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
+	s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
+	s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
+	s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
+
+	return 0;
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_AC97,
+		.end   = S3C64XX_PA_AC97 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_AC97_PCMOUT,
+		.end   = DMACH_AC97_PCMOUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_AC97_PCMIN,
+		.end   = DMACH_AC97_PCMIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.start = DMACH_AC97_MICIN,
+		.end   = DMACH_AC97_MICIN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.start = IRQ_AC97,
+		.end   = IRQ_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata;
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_ac97_resource),
+	.resource	  = s3c64xx_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s3c64xx_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+	if (num == S3C64XX_AC97_GPD)
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+	else
+		s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}

arch/arm/plat-s3c64xx/dma.c → arch/arm/mach-s3c64xx/dma.c

@@ -27,8 +27,7 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 
 #include <asm/hardware/pl080.h>