Merge tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Core Frameworks
   - Make better attempt at matching device with the correct OF node
   - Allow batch removal of hierarchical sub-devices

  New Drivers
   - Add STM32 Clocksource driver
   - Add support for Khadas System Control Microcontroller

  Driver Removal
   - Remove unused driver for TI's SMSC ECE1099

  New Device Support
   - Add support for Intel Emmitsburg PCH to Intel LPSS PCI
   - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI
   - Add support for Dialog DA revision to Dialog DA9063

  New Functionality
   - Add support for AXP803 to be probed by I2C

  Fix-ups
   - Numerous W=1 warning fixes
   - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller)
   - Enabled Regmap 'fast I/O' in stm32-lptimer
   - Change BUG_ON to WARN_ON in arizona-core
   - Remove superfluous code/initialisation (madera, max14577)
   - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private)
   - Switch to of_platform_populate() in sprd-sc27xx-spi
   - Expand out set/get brightness/pwm macros in lm3533-ctrlbank
   - Disable IRQs on suspend in motorola-cpcap
   - Clean-up error handling in intel_soc_pmic_mrfld
   - Ensure correct removal order of sub-devices in madera
   - Many s/HTTP/HTTPS/ link changes
   - Ensure name used with Regmap is unique in syscon

  Bug Fixes
   - Properly 'put' clock on unbind and error in arizona-core
   - Fix revision handling in da9063
   - Fix 'assignment of read-only location' error in kempld-core
   - Avoid using the Regmap API when atomic in rn5t618
   - Redefine volatile register description in rn5t618
   - Use locking to protect event handler in dln2"

* tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits)
  mfd: syscon: Use a unique name with regmap_config
  mfd: Replace HTTP links with HTTPS ones
  mfd: dln2: Run event handler loop under spinlock
  mfd: madera: Improve handling of regulator unbinding
  mfd: mfd-core: Add mechanism for removal of a subset of children
  mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8()
  mfd: max14577: Remove redundant initialization of variable current_bits
  mfd: rn5t618: Fix caching of battery related registers
  mfd: max77693-private: Drop a duplicated word
  mfd: da9055: pdata.h: Drop a duplicated word
  mfd: rn5t618: Make restart handler atomic safe
  mfd: kempld-core: Fix 'assignment of read-only location' error
  mfd: axp20x: Allow the AXP803 to be probed by I2C
  mfd: da9063: Add support for latest DA silicon revision
  mfd: da9063: Fix revision handling to correctly select reg tables
  dt-bindings: mfd: st,stmfx: Remove I2C unit name
  dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller
  mfd: motorola-cpcap: Disable interrupt for suspend
  mfd: smsc-ece1099: Remove driver
  mfd: core: Add OF_MFD_CELL_REG() helper
  ...

Documentation/devicetree/bindings/mfd/cros-ec.txt

-ChromeOS Embedded Controller
-
-Google's ChromeOS EC is a Cortex-M device which talks to the AP and
-implements various function such as keyboard and battery charging.
-
-The EC can be connect through various means (I2C, SPI, LPC, RPMSG) and the
-compatible string used depends on the interface. Each connection method has
-its own driver which connects to the top level interface-agnostic EC driver.
-Other Linux driver (such as cros-ec-keyb for the matrix keyboard) connect to
-the top-level driver.
-
-Required properties (I2C):
-- compatible: "google,cros-ec-i2c"
-- reg: I2C slave address
-
-Required properties (SPI):
-- compatible: "google,cros-ec-spi"
-- reg: SPI chip select
-
-Required properties (RPMSG):
-- compatible: "google,cros-ec-rpmsg"
-
-Optional properties (SPI):
-- google,cros-ec-spi-pre-delay: Some implementations of the EC need a little
-  time to wake up from sleep before they can receive SPI transfers at a high
-  clock rate. This property specifies the delay, in usecs, between the
-  assertion of the CS to the start of the first clock pulse.
-- google,cros-ec-spi-msg-delay: Some implementations of the EC require some
-  additional processing time in order to accept new transactions. If the delay
-  between transactions is not long enough the EC may not be able to respond
-  properly to subsequent transactions and cause them to hang. This property
-  specifies the delay, in usecs, introduced between transactions to account
-  for the time required by the EC to get back into a state in which new data
-  can be accepted.
-
-Required properties (LPC):
-- compatible: "google,cros-ec-lpc"
-- reg: List of (IO address, size) pairs defining the interface uses
-
-Optional properties (all):
-- google,has-vbc-nvram: Some implementations of the EC include a small
-  nvram space used to store verified boot context data. This boolean flag
-  is used to specify whether this nvram is present or not.
-
-Example for I2C:
-
-i2c@12ca0000 {
-	cros-ec@1e {
-		reg = <0x1e>;
-		compatible = "google,cros-ec-i2c";
-		interrupts = <14 0>;
-		interrupt-parent = <&wakeup_eint>;
-		wakeup-source;
-	};
-
-
-Example for SPI:
-
-spi@131b0000 {
-	ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0x0>;
-		interrupts = <14 0>;
-		interrupt-parent = <&wakeup_eint>;
-		wakeup-source;
-		spi-max-frequency = <5000000>;
-		controller-data {
-		cs-gpio = <&gpf0 3 4 3 0>;
-		samsung,spi-cs;
-		samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
-
-
-Example for LPC is not supplied as it is not yet implemented.

Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml

@@ -79,11 +79,12 @@ properties:
             description: |
               conversion mode:
                 0 - temperature, in C*10
-                1 - pre-scaled voltage value
+                1 - pre-scaled 24-bit voltage value
                 2 - scaled voltage based on an optional resistor divider
                     and optional offset
+                3 - pre-scaled 16-bit voltage value
             $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [0, 1, 2]
+            enum: [0, 1, 2, 3]
 
           gw,voltage-divider-ohms:
             description: Values of resistors for divider on raw ADC input

Documentation/devicetree/bindings/mfd/google,cros-ec.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/google,cros-ec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS Embedded Controller
+
+maintainers:
+  - Benson Leung <bleung@chromium.org>
+  - Enric Balletbo i Serra <enric.balletbo@collabora.com>
+  - Guenter Roeck <groeck@chromium.org>
+
+description:
+  Google's ChromeOS EC is a microcontroller which talks to the AP and
+  implements various functions such as keyboard and battery charging.
+  The EC can be connected through various interfaces (I2C, SPI, and others)
+  and the compatible string specifies which interface is being used.
+
+properties:
+  compatible:
+    oneOf:
+      - description:
+          For implementations of the EC is connected through I2C.
+        const: google,cros-ec-i2c
+      - description:
+          For implementations of the EC is connected through SPI.
+        const: google,cros-ec-spi
+      - description:
+          For implementations of the EC is connected through RPMSG.
+        const: google,cros-ec-rpmsg
+
+  google,cros-ec-spi-pre-delay:
+    description:
+      This property specifies the delay in usecs between the
+      assertion of the CS and the first clock pulse.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 0
+      - minimum: 0
+
+  google,cros-ec-spi-msg-delay:
+    description:
+      This property specifies the delay in usecs between messages.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 0
+      - minimum: 0
+
+  google,has-vbc-nvram:
+    description:
+      Some implementations of the EC include a small nvram space used to
+      store verified boot context data. This boolean flag is used to specify
+      whether this nvram is present or not.
+    type: boolean
+
+  spi-max-frequency:
+    description: Maximum SPI frequency of the device in Hz.
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - google,cros-ec-i2c
+          - google,cros-ec-rpmsg
+then:
+  properties:
+    google,cros-ec-spi-pre-delay: false
+    google,cros-ec-spi-msg-delay: false
+    spi-max-frequency: false
+
+additionalProperties: false
+
+examples:
+  # Example for I2C
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@1e {
+            compatible = "google,cros-ec-i2c";
+            reg = <0x1e>;
+            interrupts = <6 0>;
+            interrupt-parent = <&gpio0>;
+        };
+    };
+
+  # Example for SPI
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0x0>;
+            google,cros-ec-spi-msg-delay = <30>;
+            google,cros-ec-spi-pre-delay = <10>;
+            interrupts = <99 0>;
+            interrupt-parent = <&gpio7>;
+            spi-max-frequency = <5000000>;
+        };
+    };
+
+  # Example for RPMSG
+  - |
+    scp0 {
+        cros-ec {
+            compatible = "google,cros-ec-rpmsg";
+        };
+    };
+...

Documentation/devicetree/bindings/mfd/khadas,mcu.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Khadas on-board Microcontroller Device Tree Bindings
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  Khadas embeds a microcontroller on their VIM and Edge boards adding some
+  system feature as PWM Fan control (for VIM2 rev14 or VIM3), User memory
+  storage, IR/Key resume control, system power LED control and more.
+
+properties:
+  compatible:
+    enum:
+      - khadas,mcu # MCU revision is discoverable
+
+  "#cooling-cells": # Only needed for boards having FAN control feature
+    const: 2
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      khadas_mcu: system-controller@18 {
+        compatible = "khadas,mcu";
+        reg = <0x18>;
+        #cooling-cells = <2>;
+      };
+    };

Documentation/devicetree/bindings/mfd/st,stm32-lptimer.yaml

@@ -33,6 +33,9 @@ properties:
     items:
       - const: mux
 
+  interrupts:
+    maxItems: 1
+
   "#address-cells":
     const: 1
 
@@ -106,11 +109,13 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
     timer@40002400 {
       compatible = "st,stm32-lptimer";
       reg = <0x40002400 0x400>;
       clocks = <&timer_clk>;
       clock-names = "mux";
+      interrupts-extended = <&exti 47 IRQ_TYPE_LEVEL_HIGH>;
       #address-cells = <1>;
       #size-cells = <0>;
 

Documentation/devicetree/bindings/mfd/st,stmfx.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/st,stmfx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectonics Multi-Function eXpander (STMFX) bindings
+
+description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+               communication with the main MCU. Its main features are GPIO expansion,
+               main MCU IDD measurement (IDD is the amount of current that flows
+               through VDD) and resistive touchscreen controller.
+
+maintainers:
+  - Amelie Delaunay <amelie.delaunay@st.com>
+
+properties:
+  compatible:
+    const: st,stmfx-0300
+
+  reg:
+    enum: [ 0x42, 0x43 ]
+
+  interrupts:
+    maxItems: 1
+
+  drive-open-drain: true
+
+  vdd-supply:
+    maxItems: 1
+
+  pinctrl:
+    type: object
+
+    properties:
+      compatible:
+        const: st,stmfx-0300-pinctrl
+
+      "#gpio-cells":
+        const: 2
+
+      "#interrupt-cells":
+        const: 2
+
+      gpio-controller: true
+
+      interrupt-controller: true
+
+      gpio-ranges:
+        description: if all STMFX pins[24:0] are available (no other STMFX function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+                     if agpio[3:0] are not available (STMFX Touchscreen function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+                     if agpio[7:4] are not available (STMFX IDD function in use),
+                     you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+        maxItems: 1
+
+    patternProperties:
+      "^[a-zA-Z]*-pins$":
+        type: object
+
+        allOf:
+          - $ref: ../pinctrl/pinmux-node.yaml
+
+        properties:
+          pins: true
+          bias-disable: true
+          bias-pull-up: true
+          bias-pull-pin-default: true
+          bias-pull-down: true
+          drive-open-drain: true
+          drive-push-pull: true
+          output-high: true
+          output-low: true
+
+    additionalProperties: false
+
+    required:
+      - compatible
+      - "#gpio-cells"
+      - "#interrupt-cells"
+      - gpio-controller
+      - interrupt-controller
+      - gpio-ranges
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      stmfx@42 {
+        compatible = "st,stmfx-0300";
+        reg = <0x42>;
+        interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+        interrupt-parent = <&gpioi>;
+        vdd-supply = <&v3v3>;
+
+        stmfx_pinctrl: pinctrl {
+          compatible = "st,stmfx-0300-pinctrl";
+          #gpio-cells = <2>;
+          #interrupt-cells = <2>;
+          gpio-controller;
+          interrupt-controller;
+          gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+          joystick_pins: joystick-pins {
+            pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+            drive-push-pull;
+            bias-pull-up;
+          };
+        };
+      };
+    };
+...

Documentation/devicetree/bindings/mfd/stmfx.txt

-STMicroelectonics Multi-Function eXpander (STMFX) Core bindings
-
-ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
-communication with the main MCU. Its main features are GPIO expansion, main
-MCU IDD measurement (IDD is the amount of current that flows through VDD) and
-resistive touchscreen controller.
-
-Required properties:
-- compatible: should be "st,stmfx-0300".
-- reg: I2C slave address of the device.
-- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal.
-  Please refer to ../interrupt-controller/interrupt.txt
-
-Optional properties:
-- drive-open-drain: configure MFX_IRQ_OUT as open drain.
-- vdd-supply: phandle of the regulator supplying STMFX.
-
-Example:
-
-	stmfx: stmfx@42 {
-		compatible = "st,stmfx-0300";
-		reg = <0x42>;
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
-		interrupt-parent = <&gpioi>;
-		vdd-supply = <&v3v3>;
-	};
-
-Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings.

Documentation/devicetree/bindings/mfd/twl-family.txt

@@ -26,7 +26,7 @@ Optional node:
 Example:
 /*
  * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/twl6030.pdf
+ * https://www.ti.com/lit/ds/symlink/twl6030.pdf
  */
 twl@48 {
     compatible = "ti,twl6030";

Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt

-STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
-
-ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
-Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
-
-Required properties:
-- compatible: should be "st,stmfx-0300-pinctrl".
-- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
-  cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
-- gpio-controller: marks the device as a GPIO controller.
-- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
-  second cell is the interrupt flags in accordance with
-  <dt-bindings/interrupt-controller/irq.h>.
-- interrupt-controller: marks the device as an interrupt controller.
-- gpio-ranges: specifies the mapping between gpio controller and pin
-  controller pins. Check "Concerning gpio-ranges property" below.
-Please refer to ../gpio/gpio.txt.
-
-Please refer to pinctrl-bindings.txt for pin configuration.
-
-Required properties for pin configuration sub-nodes:
-- pins: list of pins to which the configuration applies.
-
-Optional properties for pin configuration sub-nodes (pinconf-generic ones):
-- bias-disable: disable any bias on the pin.
-- bias-pull-up: the pin will be pulled up.
-- bias-pull-pin-default: use the pin-default pull state.
-- bias-pull-down: the pin will be pulled down.
-- drive-open-drain: the pin will be driven with open drain.
-- drive-push-pull: the pin will be driven actively high and low.
-- output-high: the pin will be configured as an output driving high level.
-- output-low: the pin will be configured as an output driving low level.
-
-Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
-called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
-
-Concerning gpio-ranges property:
-- if all STMFX pins[24:0] are available (no other STMFX function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
-- if agpio[7:4] are not available (STMFX IDD function in use), you
-  should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
-
-
-Example:
-
-	stmfx: stmfx@42 {
-		...
-
-		stmfx_pinctrl: stmfx-pin-controller {
-			compatible = "st,stmfx-0300-pinctrl";
-			#gpio-cells = <2>;
-			#interrupt-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			gpio-ranges = <&stmfx_pinctrl 0 0 24>;
-
-			joystick_pins: joystick {
-				pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
-				drive-push-pull;
-				bias-pull-up;
-			};
-		};
-	};
-
-Example of STMFX GPIO consumers:
-
-	joystick {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&joystick_pins>;
-		pinctrl-names = "default";
-		button-0 {
-			label = "JoySel";
-			linux,code = <KEY_ENTER>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <0 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-1 {
-			label = "JoyDown";
-			linux,code = <KEY_DOWN>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <1 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-2 {
-			label = "JoyLeft";
-			linux,code = <KEY_LEFT>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-3 {
-			label = "JoyRight";
-			linux,code = <KEY_RIGHT>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-		};
-		button-4 {
-			label = "JoyUp";
-			linux,code = <KEY_UP>;
-			interrupt-parent = <&stmfx_pinctrl>;
-			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		orange {
-			gpios = <&stmfx_pinctrl 17 1>;
-		};
-
-		blue {
-			gpios = <&stmfx_pinctrl 19 1>;
-		};
-	}

Documentation/driver-api/index.rst

@@ -100,7 +100,6 @@ available subsections can be seen below.
    rfkill
    serial/index
    sm501
-   smsc_ece1099
    switchtec
    sync_file
    vfio-mediated-device

Documentation/driver-api/smsc_ece1099.rst

-=================================================
-Msc Keyboard Scan Expansion/GPIO Expansion device
-=================================================
-
-What is smsc-ece1099?
-----------------------
-
-The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion
-or GPIO Expansion device. The device supports a keyboard
-scan matrix of 23x8. The device is connected to a Master
-via the SMSC BC-Link interface or via the SMBus.
-Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals
-are multiplexed with GPIOs.
-
-Interrupt generation
---------------------
-
-Interrupts can be generated by an edge detection on a GPIO
-pin or an edge detection on one of the bus interface pins.
-Interrupts can also be detected on the keyboard scan interface.
-The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if
-any bit in one of the Interrupt Status registers is 1 and
-the corresponding Interrupt Mask bit is also 1.
-
-In order for software to determine which device is the source
-of an interrupt, it should first read the Group Interrupt Status Register
-to determine which Status register group is a source for the interrupt.
-Software should read both the Status register and the associated Mask register,
-then AND the two values together. Bits that are 1 in the result of the AND
-are active interrupts. Software clears an interrupt by writing a 1 to the
-corresponding bit in the Status register.
-
-Communication Protocol
-----------------------
-
-- SMbus slave Interface
-	The host processor communicates with the ECE1099 device
-	through a series of read/write registers via the SMBus
-	interface. SMBus is a serial communication protocol between
-	a computer host and its peripheral devices. The SMBus data
-	rate is 10KHz minimum to 400 KHz maximum
-
-- Slave Bus Interface
-	The ECE1099 device SMBus implementation is a subset of the
-	SMBus interface to the host. The device is a slave-only SMBus device.
-	The implementation in the device is a subset of SMBus since it
-	only supports four protocols.
-
-	The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the
-	only valid SMBus protocols for the device.
-
-- BC-LinkTM Interface
-	The BC-Link is a proprietary bus that allows communication
-	between a Master device and a Companion device. The Master
-	device uses this serial bus to read and write registers
-	located on the Companion device. The bus comprises three signals,
-	BC_CLK, BC_DAT and BC_INT#. The Master device always provides the
-	clock, BC_CLK, and the Companion device is the source for an
-	independent asynchronous interrupt signal, BC_INT#. The ECE1099
-	supports BC-Link speeds up to 24MHz.

MAINTAINERS

@@ -9678,6 +9678,15 @@ F:	include/linux/kdb.h
 F:	include/linux/kgdb.h
 F:	kernel/debug/
 
+KHADAS MCU MFD DRIVER
+M:	Neil Armstrong <narmstrong@baylibre.com>
+L:	linux-amlogic@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/khadas,mcu.yaml
+F:	drivers/mfd/khadas-mcu.c
+F:	include/linux/mfd/khadas-mcu.h
+F:	drivers/thermal/khadas_mcu_fan.c
+
 KMEMLEAK
 M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
@@ -14887,6 +14896,13 @@ L:	linux-serial@vger.kernel.org
 S:	Odd Fixes
 F:	drivers/tty/serial/rp2.*
 
+ROHM BD99954 CHARGER IC
+R:	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+L:	linux-power@fi.rohmeurope.com
+S:	Supported
+F:	drivers/power/supply/bd99954-charger.c
+F:	drivers/power/supply/bd99954-charger.h
+
 ROHM BH1750 AMBIENT LIGHT SENSOR DRIVER
 M:	Tomasz Duszynski <tduszyns@gmail.com>
 S:	Maintained
@@ -14904,6 +14920,31 @@ F:	drivers/mfd/bd9571mwv.c
 F:	drivers/regulator/bd9571mwv-regulator.c
 F:	include/linux/mfd/bd9571mwv.h
 
+ROHM POWER MANAGEMENT IC DEVICE DRIVERS
+R:	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+L:	linux-power@fi.rohmeurope.com
+S:	Supported
+F:	Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
+F:	Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
+F:	drivers/clk/clk-bd718x7.c
+F:	drivers/gpio/gpio-bd70528.c
+F:	drivers/gpio/gpio-bd71828.c
+F:	drivers/mfd/rohm-bd70528.c
+F:	drivers/mfd/rohm-bd71828.c
+F:	drivers/mfd/rohm-bd718x7.c
+F:	drivers/power/supply/bd70528-charger.c
+F:	drivers/regulator/bd70528-regulator.c
+F:	drivers/regulator/bd71828-regulator.c
+F:	drivers/regulator/bd718x7-regulator.c
+F:	drivers/regulator/rohm-regulator.c
+F:	drivers/rtc/rtc-bd70528.c
+F:	drivers/watchdog/bd70528_wdt.c
+F:	include/linux/mfd/rohm-bd70528.h
+F:	include/linux/mfd/rohm-bd71828.h
+F:	include/linux/mfd/rohm-bd718x7.h
+F:	include/linux/mfd/rohm-generic.h
+F:	include/linux/mfd/rohm-shared.h
+
 ROSE NETWORK LAYER
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org

drivers/clocksource/Kconfig

@@ -291,6 +291,10 @@ config CLKSRC_STM32
 	select CLKSRC_MMIO
 	select TIMER_OF
 
+config CLKSRC_STM32_LP
+	bool "Low power clocksource for STM32 SoCs"
+	depends on MFD_STM32_LPTIMER || COMPILE_TEST
+
 config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK

drivers/clocksource/Makefile

@@ -45,6 +45,7 @@ obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= timer-cadence-ttc.o
 obj-$(CONFIG_CLKSRC_EFM32)	+= timer-efm32.o
 obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
+obj-$(CONFIG_CLKSRC_STM32_LP)	+= timer-stm32-lp.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
 obj-$(CONFIG_CLKSRC_LPC32XX)	+= timer-lpc32xx.o
 obj-$(CONFIG_CLKSRC_MPS2)	+= mps2-timer.o

drivers/clocksource/timer-stm32-lp.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Authors: Benjamin Gaignard <benjamin.gaignard@st.com> for STMicroelectronics.
+ *	    Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stm32-lptimer.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+
+#define CFGR_PSC_OFFSET		9
+#define STM32_LP_RATING		1000
+#define STM32_TARGET_CLKRATE	(32000 * HZ)
+#define STM32_LP_MAX_PSC	7
+
+struct stm32_lp_private {
+	struct regmap *reg;
+	struct clock_event_device clkevt;
+	unsigned long period;
+	struct device *dev;
+};
+
+static struct stm32_lp_private*
+to_priv(struct clock_event_device *clkevt)
+{
+	return container_of(clkevt, struct stm32_lp_private, clkevt);
+}
+
+static int stm32_clkevent_lp_shutdown(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	regmap_write(priv->reg, STM32_LPTIM_IER, 0);
+	/* clear pending flags */
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_timer(unsigned long evt,
+				       struct clock_event_device *clkevt,
+				       int is_periodic)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	/* disable LPTIMER to be able to write into IER register*/
+	regmap_write(priv->reg, STM32_LPTIM_CR, 0);
+	/* enable ARR interrupt */
+	regmap_write(priv->reg, STM32_LPTIM_IER, STM32_LPTIM_ARRMIE);
+	/* enable LPTIMER to be able to write into ARR register */
+	regmap_write(priv->reg, STM32_LPTIM_CR, STM32_LPTIM_ENABLE);
+	/* set next event counter */
+	regmap_write(priv->reg, STM32_LPTIM_ARR, evt);
+
+	/* start counter */
+	if (is_periodic)
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_CNTSTRT | STM32_LPTIM_ENABLE);
+	else
+		regmap_write(priv->reg, STM32_LPTIM_CR,
+			     STM32_LPTIM_SNGSTRT | STM32_LPTIM_ENABLE);
+
+	return 0;
+}
+
+static int stm32_clkevent_lp_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
+{
+	return stm32_clkevent_lp_set_timer(evt, clkevt,
+					   clockevent_state_periodic(clkevt));
+}
+
+static int stm32_clkevent_lp_set_periodic(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, true);
+}
+
+static int stm32_clkevent_lp_set_oneshot(struct clock_event_device *clkevt)
+{
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	return stm32_clkevent_lp_set_timer(priv->period, clkevt, false);
+}
+
+static irqreturn_t stm32_clkevent_lp_irq_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
+	struct stm32_lp_private *priv = to_priv(clkevt);
+
+	regmap_write(priv->reg, STM32_LPTIM_ICR, STM32_LPTIM_ARRMCF);
+
+	if (clkevt->event_handler)
+		clkevt->event_handler(clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static void stm32_clkevent_lp_set_prescaler(struct stm32_lp_private *priv,
+					    unsigned long *rate)
+{
+	int i;
+
+	for (i = 0; i <= STM32_LP_MAX_PSC; i++) {
+		if (DIV_ROUND_CLOSEST(*rate, 1 << i) < STM32_TARGET_CLKRATE)
+			break;
+	}
+
+	regmap_write(priv->reg, STM32_LPTIM_CFGR, i << CFGR_PSC_OFFSET);
+
+	/* Adjust rate and period given the prescaler value */
+	*rate = DIV_ROUND_CLOSEST(*rate, (1 << i));
+	priv->period = DIV_ROUND_UP(*rate, HZ);
+}
+
+static void stm32_clkevent_lp_init(struct stm32_lp_private *priv,
+				  struct device_node *np, unsigned long rate)
+{
+	priv->clkevt.name = np->full_name;
+	priv->clkevt.cpumask = cpu_possible_mask;
+	priv->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
+				CLOCK_EVT_FEAT_ONESHOT;
+	priv->clkevt.set_state_shutdown = stm32_clkevent_lp_shutdown;
+	priv->clkevt.set_state_periodic = stm32_clkevent_lp_set_periodic;
+	priv->clkevt.set_state_oneshot = stm32_clkevent_lp_set_oneshot;
+	priv->clkevt.set_next_event = stm32_clkevent_lp_set_next_event;
+	priv->clkevt.rating = STM32_LP_RATING;
+
+	clockevents_config_and_register(&priv->clkevt, rate, 0x1,
+					STM32_LPTIM_MAX_ARR);
+}
+
+static int stm32_clkevent_lp_probe(struct platform_device *pdev)
+{
+	struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
+	struct stm32_lp_private *priv;
+	unsigned long rate;
+	int ret, irq;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->reg = ddata->regmap;
+	ret = clk_prepare_enable(ddata->clk);
+	if (ret)
+		return -EINVAL;
+
+	rate = clk_get_rate(ddata->clk);
+	if (!rate) {
+		ret = -EINVAL;
+		goto out_clk_disable;
+	}
+
+	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+	if (irq <= 0) {
+		ret = irq;
+		goto out_clk_disable;
+	}
+
+	if (of_property_read_bool(pdev->dev.parent->of_node, "wakeup-source")) {
+		ret = device_init_wakeup(&pdev->dev, true);
+		if (ret)
+			goto out_clk_disable;
+
+		ret = dev_pm_set_wake_irq(&pdev->dev, irq);
+		if (ret)
+			goto out_clk_disable;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq, stm32_clkevent_lp_irq_handler,
+			       IRQF_TIMER, pdev->name, &priv->clkevt);
+	if (ret)
+		goto out_clk_disable;
+
+	stm32_clkevent_lp_set_prescaler(priv, &rate);
+
+	stm32_clkevent_lp_init(priv, pdev->dev.parent->of_node, rate);
+
+	priv->dev = &pdev->dev;
+
+	return 0;
+
+out_clk_disable:
+	clk_disable_unprepare(ddata->clk);
+	return ret;
+}
+
+static int stm32_clkevent_lp_remove(struct platform_device *pdev)
+{
+	return -EBUSY; /* cannot unregister clockevent */
+}
+
+static const struct of_device_id stm32_clkevent_lp_of_match[] = {
+	{ .compatible = "st,stm32-lptimer-timer", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_clkevent_lp_of_match);
+
+static struct platform_driver stm32_clkevent_lp_driver = {
+	.probe	= stm32_clkevent_lp_probe,
+	.remove = stm32_clkevent_lp_remove,
+	.driver	= {
+		.name = "stm32-lptimer-timer",
+		.of_match_table = of_match_ptr(stm32_clkevent_lp_of_match),
+	},
+};
+module_platform_driver(stm32_clkevent_lp_driver);
+
+MODULE_ALIAS("platform:stm32-lptimer-timer");
+MODULE_DESCRIPTION("STMicroelectronics STM32 clockevent low power driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/Kconfig

@@ -1193,18 +1193,6 @@ config MFD_SKY81452
 	  This driver can also be built as a module.  If so, the module
 	  will be called sky81452.
 
-config MFD_SMSC
-	bool "SMSC ECE1099 series chips"
-	depends on I2C=y
-	select MFD_CORE
-	select REGMAP_I2C
-	help
-	  If you say yes here you get support for the
-	  ece1099 chips from SMSC.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called smsc.
-
 config MFD_SC27XX_PMIC
 	tristate "Spreadtrum SC27xx PMICs"
 	depends on ARCH_SPRD || COMPILE_TEST
@@ -2053,6 +2041,27 @@ config MFD_WCD934X
 	  This driver provides common support WCD934x audio codec and its
 	  associated Pin Controller, Soundwire Controller and Audio codec.
 
+config MFD_KHADAS_MCU
+	tristate "Support for Khadas System control Microcontroller"
+	depends on I2C
+	depends on ARCH_MESON || ARCH_ROCKCHIP || COMPILE_TEST
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the Khadas System control Microcontroller interface
+	  present on their VIM and Edge boards.
+
+	  This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and
+	  Edge boards.
+
+	  It provides multiple boot control features like password check,
+	  power-on options, power-off control and system FAN control on recent
+	  boards.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 

drivers/mfd/Makefile

@@ -127,7 +127,6 @@ obj-$(CONFIG_MFD_CPCAP)		+= motorola-cpcap.o
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
-obj-$(CONFIG_MFD_SMSC)        += smsc-ece1099.o
 obj-$(CONFIG_MCP_UCB1200_TS)	+= ucb1x00-ts.o
 
 ifeq ($(CONFIG_SA1100_ASSABET),y)
@@ -262,5 +261,6 @@ obj-$(CONFIG_MFD_ROHM_BD70528)	+= rohm-bd70528.o
 obj-$(CONFIG_MFD_ROHM_BD71828)	+= rohm-bd71828.o
 obj-$(CONFIG_MFD_ROHM_BD718XX)	+= rohm-bd718x7.o
 obj-$(CONFIG_MFD_STMFX) 	+= stmfx.o
+obj-$(CONFIG_MFD_KHADAS_MCU) 	+= khadas-mcu.o
 
 obj-$(CONFIG_SGI_MFD_IOC3)	+= ioc3.o

drivers/mfd/ab3100-core.c

@@ -498,7 +498,7 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 	int i = 0;
 
 	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf)-1));
+	buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1));
 	if (copy_from_user(buf, user_buf, buf_size))
 		return -EFAULT;
 	buf[buf_size] = 0;

drivers/mfd/ab3100-otp.c

@@ -29,22 +29,22 @@
 
 /**
  * struct ab3100_otp
- * @dev containing device
- * @locked whether the OTP is locked, after locking, no more bits
+ * @dev: containing device
+ * @locked: whether the OTP is locked, after locking, no more bits
  *       can be changed but before locking it is still possible
  *       to change bits from 1->0.
- * @freq clocking frequency for the OTP, this frequency is either
+ * @freq: clocking frequency for the OTP, this frequency is either
  *       32768Hz or 1MHz/30
- * @paf product activation flag, indicates whether this is a real
+ * @paf: product activation flag, indicates whether this is a real
  *       product (paf true) or a lab board etc (paf false)
- * @imeich if this is set it is possible to override the
+ * @imeich: if this is set it is possible to override the
  *       IMEI number found in the tac, fac and svn fields with
  *       (secured) software
- * @cid customer ID
- * @tac type allocation code of the IMEI
- * @fac final assembly code of the IMEI
- * @svn software version number of the IMEI
- * @debugfs a debugfs file used when dumping to file
+ * @cid: customer ID
+ * @tac: type allocation code of the IMEI
+ * @fac: final assembly code of the IMEI
+ * @svn: software version number of the IMEI
+ * @debugfs: a debugfs file used when dumping to file
  */
 struct ab3100_otp {
 	struct device *dev;

drivers/mfd/ab8500-debugfs.c

@@ -1801,7 +1801,7 @@ static ssize_t ab8500_hwreg_write(struct file *file,
 	int buf_size, ret;
 
 	/* Get userspace string and assure termination */
-	buf_size = min(count, (sizeof(buf)-1));
+	buf_size = min((int)count, (int)(sizeof(buf)-1));
 	if (copy_from_user(buf, user_buf, buf_size))
 		return -EFAULT;
 	buf[buf_size] = 0;

drivers/mfd/altera-sysmgr.c

@@ -22,11 +22,9 @@
 /**
  * struct altr_sysmgr - Altera SOCFPGA System Manager
  * @regmap: the regmap used for System Manager accesses.
- * @base  : the base address for the System Manager
  */
 struct altr_sysmgr {
 	struct regmap   *regmap;
-	resource_size_t *base;
 };
 
 static struct platform_driver altr_sysmgr_driver;
@@ -91,6 +89,9 @@ static struct regmap_config altr_sysmgr_regmap_cfg = {
  * altr_sysmgr_regmap_lookup_by_phandle
  * Find the sysmgr previous configured in probe() and return regmap property.
  * Return: regmap if found or error if not found.
+ *
+ * @np: Pointer to device's Device Tree node
+ * @property: Device Tree property name which references the sysmgr
  */
 struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
 						    const char *property)
@@ -127,6 +128,7 @@ static int sysmgr_probe(struct platform_device *pdev)
 	struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
+	void __iomem *base;
 
 	sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL);
 	if (!sysmgr)
@@ -139,22 +141,19 @@ static int sysmgr_probe(struct platform_device *pdev)
 	sysmgr_config.max_register = resource_size(res) -
 				     sysmgr_config.reg_stride;
 	if (of_device_is_compatible(np, "altr,sys-mgr-s10")) {
-		/* Need physical address for SMCC call */
-		sysmgr->base = (resource_size_t *)res->start;
 		sysmgr_config.reg_read = s10_protected_reg_read;
 		sysmgr_config.reg_write = s10_protected_reg_write;
 
-		regmap = devm_regmap_init(dev, NULL, sysmgr->base,
+		/* Need physical address for SMCC call */
+		regmap = devm_regmap_init(dev, NULL, (void *)res->start,
 					  &sysmgr_config);
 	} else {
-		sysmgr->base = devm_ioremap(dev, res->start,
-					    resource_size(res));
-		if (!sysmgr->base)
+		base = devm_ioremap(dev, res->start, resource_size(res));
+		if (!base)
 			return -ENOMEM;
 
 		sysmgr_config.max_register = res->end - res->start - 3;
-		regmap = devm_regmap_init_mmio(dev, sysmgr->base,
-					       &sysmgr_config);
+		regmap = devm_regmap_init_mmio(dev, base, &sysmgr_config);
 	}
 
 	if (IS_ERR(regmap)) {

drivers/mfd/arizona-core.c

@@ -80,7 +80,7 @@ int arizona_clk32k_disable(struct arizona *arizona)
 {
 	mutex_lock(&arizona->clk_lock);
 
-	BUG_ON(arizona->clk32k_ref <= 0);
+	WARN_ON(arizona->clk32k_ref <= 0);
 
 	arizona->clk32k_ref--;
 
@@ -1426,6 +1426,15 @@ int arizona_dev_init(struct arizona *arizona)
 	arizona_irq_exit(arizona);
 err_pm:
 	pm_runtime_disable(arizona->dev);
+
+	switch (arizona->pdata.clk32k_src) {
+	case ARIZONA_32KZ_MCLK1:
+	case ARIZONA_32KZ_MCLK2:
+		arizona_clk32k_disable(arizona);
+		break;
+	default:
+		break;
+	}
 err_reset:
 	arizona_enable_reset(arizona);
 	regulator_disable(arizona->dcvdd);
@@ -1448,6 +1457,15 @@ int arizona_dev_exit(struct arizona *arizona)
 	regulator_disable(arizona->dcvdd);
 	regulator_put(arizona->dcvdd);
 
+	switch (arizona->pdata.clk32k_src) {
+	case ARIZONA_32KZ_MCLK1:
+	case ARIZONA_32KZ_MCLK2:
+		arizona_clk32k_disable(arizona);
+		break;
+	default:
+		break;
+	}
+
 	mfd_remove_devices(arizona->dev);
 	arizona_free_irq(arizona, ARIZONA_IRQ_UNDERCLOCKED, arizona);
 	arizona_free_irq(arizona, ARIZONA_IRQ_OVERCLOCKED, arizona);

drivers/mfd/atmel-smc.c

@@ -237,7 +237,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle);
  * atmel_smc_cs_conf_apply - apply an SMC CS conf
  * @regmap: the SMC regmap
  * @cs: the CS id
- * @conf the SMC CS conf to apply
+ * @conf: the SMC CS conf to apply
  *
  * Applies an SMC CS configuration.
  * Only valid on at91sam9/avr32 SoCs.
@@ -257,7 +257,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply);
  * @regmap: the HSMC regmap
  * @cs: the CS id
  * @layout: the layout of registers
- * @conf the SMC CS conf to apply
+ * @conf: the SMC CS conf to apply
  *
  * Applies an SMC CS configuration.
  * Only valid on post-sama5 SoCs.

drivers/mfd/axp20x-i2c.c

@@ -63,6 +63,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
 	{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
 	{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
 	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
+	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
 	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
 	{ },
 };
@@ -74,11 +75,13 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
 	{ "axp209", 0 },
 	{ "axp221", 0 },
 	{ "axp223", 0 },
+	{ "axp803", 0 },
 	{ "axp806", 0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id axp20x_i2c_acpi_match[] = {
 	{
 		.id = "INT33F4",
@@ -87,6 +90,7 @@ static const struct acpi_device_id axp20x_i2c_acpi_match[] = {
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, axp20x_i2c_acpi_match);
+#endif
 
 static struct i2c_driver axp20x_i2c_driver = {
 	.driver = {

drivers/mfd/cros_ec_dev.c

@@ -24,7 +24,7 @@ static struct class cros_class = {
 };
 
 /**
- * cros_feature_to_name - CrOS feature id to name/short description.
+ * struct cros_feature_to_name - CrOS feature id to name/short description.
  * @id: The feature identifier.
  * @name: Device name associated with the feature id.
  * @desc: Short name that will be displayed.
@@ -36,7 +36,7 @@ struct cros_feature_to_name {
 };
 
 /**
- * cros_feature_to_cells - CrOS feature id to mfd cells association.
+ * struct cros_feature_to_cells - CrOS feature id to mfd cells association.
  * @id: The feature identifier.
  * @mfd_cells: Pointer to the array of mfd cells that needs to be added.
  * @num_cells: Number of mfd cells into the array.

drivers/mfd/da9063-core.c

@@ -160,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063)
 
 int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 {
-	int model, variant_id, variant_code;
 	int ret;
 
 	ret = da9063_clear_fault_log(da9063);
@@ -171,36 +170,6 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
 	da9063->irq_base = -1;
 	da9063->chip_irq = irq;
 
-	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
-	if (ret < 0) {
-		dev_err(da9063->dev, "Cannot read chip model id.\n");
-		return -EIO;
-	}
-	if (model != PMIC_CHIP_ID_DA9063) {
-		dev_err(da9063->dev, "Invalid chip model id: 0x%02x\n", model);
-		return -ENODEV;
-	}
-
-	ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_VARIANT, &variant_id);
-	if (ret < 0) {
-		dev_err(da9063->dev, "Cannot read chip variant id.\n");
-		return -EIO;
-	}
-
-	variant_code = variant_id >> DA9063_CHIP_VARIANT_SHIFT;
-
-	dev_info(da9063->dev,
-		 "Device detected (chip-ID: 0x%02X, var-ID: 0x%02X)\n",
-		 model, variant_id);
-
-	if (variant_code < PMIC_DA9063_BB && variant_code != PMIC_DA9063_AD) {
-		dev_err(da9063->dev,
-			"Cannot support variant code: 0x%02X\n", variant_code);
-		return -ENODEV;
-	}
-
-	da9063->variant_code = variant_code;
-
 	ret = da9063_irq_init(da9063);
 	if (ret) {
 		dev_err(da9063->dev, "Cannot initialize interrupts.\n");

drivers/mfd/db8500-prcmu.c

@@ -2276,6 +2276,8 @@ bool db8500_prcmu_is_ac_wake_requested(void)
  *
  * Saves the reset reason code and then sets the APE_SOFTRST register which
  * fires interrupt to fw
+ *
+ * @reset_code: The reason for system reset
  */
 void db8500_prcmu_system_reset(u16 reset_code)
 {
@@ -3004,10 +3006,6 @@ static int db8500_prcmu_register_ab8500(struct device *parent)
 	return mfd_add_devices(parent, 0, ab850x_cell, 1, NULL, 0, NULL);
 }
 
-/**
- * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
- *
- */
 static int db8500_prcmu_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;

drivers/mfd/dln2.c

@@ -287,7 +287,11 @@ static void dln2_rx(struct urb *urb)
 	len = urb->actual_length - sizeof(struct dln2_header);
 
 	if (handle == DLN2_HANDLE_EVENT) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&dln2->event_cb_lock, flags);
 		dln2_run_event_callbacks(dln2, id, echo, data, len);
+		spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
 	} else {
 		/* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
 		if (dln2_transfer_complete(dln2, urb, handle, echo))

drivers/mfd/hi6421-pmic-core.c

@@ -5,7 +5,7 @@
  * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
  *              http://www.hisilicon.com
  * Copyright (c) <2013-2017> Linaro Ltd.
- *              http://www.linaro.org
+ *              https://www.linaro.org
  *
  * Author: Guodong Xu <guodong.xu@linaro.org>
  */

drivers/mfd/intel-lpss-pci.c

@@ -201,6 +201,9 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x1ac4), (kernel_ulong_t)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x1ac6), (kernel_ulong_t)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x1aee), (kernel_ulong_t)&bxt_uart_info },
+	/* EBG */
+	{ PCI_VDEVICE(INTEL, 0x1bad), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x1bae), (kernel_ulong_t)&bxt_uart_info },
 	/* GLK */
 	{ PCI_VDEVICE(INTEL, 0x31ac), (kernel_ulong_t)&glk_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x31ae), (kernel_ulong_t)&glk_i2c_info },
@@ -230,6 +233,22 @@ static const struct pci_device_id intel_lpss_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x34ea), (kernel_ulong_t)&bxt_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x34eb), (kernel_ulong_t)&bxt_i2c_info },
 	{ PCI_VDEVICE(INTEL, 0x34fb), (kernel_ulong_t)&spt_info },
+	/* TGL-H */
+	{ PCI_VDEVICE(INTEL, 0x43a7), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x43a8), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x43a9), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x43aa), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x43ab), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x43ad), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43ae), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43d8), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43da), (kernel_ulong_t)&bxt_uart_info },
+	{ PCI_VDEVICE(INTEL, 0x43e8), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43e9), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43ea), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43eb), (kernel_ulong_t)&bxt_i2c_info },
+	{ PCI_VDEVICE(INTEL, 0x43fb), (kernel_ulong_t)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x43fd), (kernel_ulong_t)&bxt_info },
 	/* EHL */
 	{ PCI_VDEVICE(INTEL, 0x4b28), (kernel_ulong_t)&bxt_uart_info },
 	{ PCI_VDEVICE(INTEL, 0x4b29), (kernel_ulong_t)&bxt_uart_info },

drivers/mfd/intel_soc_pmic_mrfld.c

@@ -91,13 +91,8 @@ static int bcove_ipc_byte_reg_write(void *context, unsigned int reg,
 {
 	struct intel_soc_pmic *pmic = context;
 	u8 ipc_in = val;
-	int ret;
 
-	ret = intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in);
-	if (ret)
-		return ret;
-
-	return 0;
+	return intel_scu_ipc_dev_iowrite8(pmic->scu, reg, ipc_in);
 }
 
 static const struct regmap_config bcove_regmap_config = {

drivers/mfd/kempld-core.c

@@ -79,39 +79,31 @@ enum kempld_cells {
 	KEMPLD_UART,
 };
 
-static const struct mfd_cell kempld_devs[] = {
-	[KEMPLD_I2C] = {
-		.name = "kempld-i2c",
-	},
-	[KEMPLD_WDT] = {
-		.name = "kempld-wdt",
-	},
-	[KEMPLD_GPIO] = {
-		.name = "kempld-gpio",
-	},
-	[KEMPLD_UART] = {
-		.name = "kempld-uart",
-	},
+static const char *kempld_dev_names[] = {
+	[KEMPLD_I2C] = "kempld-i2c",
+	[KEMPLD_WDT] = "kempld-wdt",
+	[KEMPLD_GPIO] = "kempld-gpio",
+	[KEMPLD_UART] = "kempld-uart",
 };
 
-#define KEMPLD_MAX_DEVS	ARRAY_SIZE(kempld_devs)
+#define KEMPLD_MAX_DEVS	ARRAY_SIZE(kempld_dev_names)
 
 static int kempld_register_cells_generic(struct kempld_device_data *pld)
 {
-	struct mfd_cell devs[KEMPLD_MAX_DEVS];
+	struct mfd_cell devs[KEMPLD_MAX_DEVS] = {};
 	int i = 0;
 
 	if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C)
-		devs[i++] = kempld_devs[KEMPLD_I2C];
+		devs[i++].name = kempld_dev_names[KEMPLD_I2C];
 
 	if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG)
-		devs[i++] = kempld_devs[KEMPLD_WDT];
+		devs[i++].name = kempld_dev_names[KEMPLD_WDT];
 
 	if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO)
-		devs[i++] = kempld_devs[KEMPLD_GPIO];
+		devs[i++].name = kempld_dev_names[KEMPLD_GPIO];
 
 	if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART)
-		devs[i++] = kempld_devs[KEMPLD_UART];
+		devs[i++].name = kempld_dev_names[KEMPLD_UART];
 
 	return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL);
 }

drivers/mfd/khadas-mcu.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Khadas System control Microcontroller
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ *
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/khadas-mcu.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+static bool khadas_mcu_reg_volatile(struct device *dev, unsigned int reg)
+{
+	if (reg >= KHADAS_MCU_USER_DATA_0_REG &&
+	    reg < KHADAS_MCU_PWR_OFF_CMD_REG)
+		return true;
+
+	switch (reg) {
+	case KHADAS_MCU_PWR_OFF_CMD_REG:
+	case KHADAS_MCU_PASSWD_START_REG:
+	case KHADAS_MCU_CHECK_VEN_PASSWD_REG:
+	case KHADAS_MCU_CHECK_USER_PASSWD_REG:
+	case KHADAS_MCU_WOL_INIT_START_REG:
+	case KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static bool khadas_mcu_reg_writeable(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case KHADAS_MCU_PASSWD_VEN_0_REG:
+	case KHADAS_MCU_PASSWD_VEN_1_REG:
+	case KHADAS_MCU_PASSWD_VEN_2_REG:
+	case KHADAS_MCU_PASSWD_VEN_3_REG:
+	case KHADAS_MCU_PASSWD_VEN_4_REG:
+	case KHADAS_MCU_PASSWD_VEN_5_REG:
+	case KHADAS_MCU_MAC_0_REG:
+	case KHADAS_MCU_MAC_1_REG:
+	case KHADAS_MCU_MAC_2_REG:
+	case KHADAS_MCU_MAC_3_REG:
+	case KHADAS_MCU_MAC_4_REG:
+	case KHADAS_MCU_MAC_5_REG:
+	case KHADAS_MCU_USID_0_REG:
+	case KHADAS_MCU_USID_1_REG:
+	case KHADAS_MCU_USID_2_REG:
+	case KHADAS_MCU_USID_3_REG:
+	case KHADAS_MCU_USID_4_REG:
+	case KHADAS_MCU_USID_5_REG:
+	case KHADAS_MCU_VERSION_0_REG:
+	case KHADAS_MCU_VERSION_1_REG:
+	case KHADAS_MCU_DEVICE_NO_0_REG:
+	case KHADAS_MCU_DEVICE_NO_1_REG:
+	case KHADAS_MCU_FACTORY_TEST_REG:
+	case KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config khadas_mcu_regmap_config = {
+	.reg_bits	= 8,
+	.reg_stride	= 1,
+	.val_bits	= 8,
+	.max_register	= KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
+	.volatile_reg	= khadas_mcu_reg_volatile,
+	.writeable_reg	= khadas_mcu_reg_writeable,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+static struct mfd_cell khadas_mcu_fan_cells[] = {
+	/* VIM1/2 Rev13+ and VIM3 only */
+	{ .name = "khadas-mcu-fan-ctrl", },
+};
+
+static struct mfd_cell khadas_mcu_cells[] = {
+	{ .name = "khadas-mcu-user-mem", },
+};
+
+static int khadas_mcu_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct khadas_mcu *ddata;
+	int ret;
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, ddata);
+
+	ddata->dev = dev;
+
+	ddata->regmap = devm_regmap_init_i2c(client, &khadas_mcu_regmap_config);
+	if (IS_ERR(ddata->regmap)) {
+		ret = PTR_ERR(ddata->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				   khadas_mcu_cells,
+				   ARRAY_SIZE(khadas_mcu_cells),
+				   NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	if (of_find_property(dev->of_node, "#cooling-cells", NULL))
+		return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+					    khadas_mcu_fan_cells,
+					    ARRAY_SIZE(khadas_mcu_fan_cells),
+					    NULL, 0, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id khadas_mcu_of_match[] = {
+	{ .compatible = "khadas,mcu", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, khadas_mcu_of_match);
+
+static struct i2c_driver khadas_mcu_driver = {
+	.driver = {
+		.name = "khadas-mcu-core",
+		.of_match_table = of_match_ptr(khadas_mcu_of_match),
+	},
+	.probe = khadas_mcu_probe,
+};
+module_i2c_driver(khadas_mcu_driver);
+
+MODULE_DESCRIPTION("Khadas MCU core driver");
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_LICENSE("GPL v2");

drivers/mfd/lm3533-ctrlbank.c

@@ -17,7 +17,6 @@
 #define LM3533_MAX_CURRENT_MAX		29800
 #define LM3533_MAX_CURRENT_STEP		800
 
-#define LM3533_BRIGHTNESS_MAX		255
 #define LM3533_PWM_MAX			0x3f
 
 #define LM3533_REG_PWM_BASE		0x14
@@ -89,41 +88,33 @@ int lm3533_ctrlbank_set_max_current(struct lm3533_ctrlbank *cb, u16 imax)
 }
 EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_max_current);
 
-#define lm3533_ctrlbank_set(_name, _NAME)				\
-int lm3533_ctrlbank_set_##_name(struct lm3533_ctrlbank *cb, u8 val)	\
-{									\
-	u8 reg;								\
-	int ret;							\
-									\
-	if (val > LM3533_##_NAME##_MAX)					\
-		return -EINVAL;						\
-									\
-	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE);	\
-	ret = lm3533_write(cb->lm3533, reg, val);			\
-	if (ret)							\
-		dev_err(cb->dev, "failed to set " #_name "\n");		\
-									\
-	return ret;							\
-}									\
-EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_##_name);
-
-#define lm3533_ctrlbank_get(_name, _NAME)				\
-int lm3533_ctrlbank_get_##_name(struct lm3533_ctrlbank *cb, u8 *val)	\
-{									\
-	u8 reg;								\
-	int ret;							\
-									\
-	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_##_NAME##_BASE);	\
-	ret = lm3533_read(cb->lm3533, reg, val);			\
-	if (ret)							\
-		dev_err(cb->dev, "failed to get " #_name "\n");		\
-									\
-	return ret;							\
-}									\
-EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_##_name);
-
-lm3533_ctrlbank_set(brightness, BRIGHTNESS);
-lm3533_ctrlbank_get(brightness, BRIGHTNESS);
+int lm3533_ctrlbank_set_brightness(struct lm3533_ctrlbank *cb, u8 val)
+{
+	u8 reg;
+	int ret;
+
+	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
+	ret = lm3533_write(cb->lm3533, reg, val);
+	if (ret)
+		dev_err(cb->dev, "failed to set brightness\n");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_brightness);
+
+int lm3533_ctrlbank_get_brightness(struct lm3533_ctrlbank *cb, u8 *val)
+{
+	u8 reg;
+	int ret;
+
+	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_BRIGHTNESS_BASE);
+	ret = lm3533_read(cb->lm3533, reg, val);
+	if (ret)
+		dev_err(cb->dev, "failed to get brightness\n");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_brightness);
 
 /*
  * PWM-input control mask:
@@ -135,9 +126,36 @@ lm3533_ctrlbank_get(brightness, BRIGHTNESS);
  *   bit 1 - PWM-input enabled in Zone 0
  *   bit 0 - PWM-input enabled
  */
-lm3533_ctrlbank_set(pwm, PWM);
-lm3533_ctrlbank_get(pwm, PWM);
+int lm3533_ctrlbank_set_pwm(struct lm3533_ctrlbank *cb, u8 val)
+{
+	u8 reg;
+	int ret;
+
+	if (val > LM3533_PWM_MAX)
+		return -EINVAL;
+
+	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
+	ret = lm3533_write(cb->lm3533, reg, val);
+	if (ret)
+		dev_err(cb->dev, "failed to set PWM mask\n");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_set_pwm);
+
+int lm3533_ctrlbank_get_pwm(struct lm3533_ctrlbank *cb, u8 *val)
+{
+	u8 reg;
+	int ret;
 
+	reg = lm3533_ctrlbank_get_reg(cb, LM3533_REG_PWM_BASE);
+	ret = lm3533_read(cb->lm3533, reg, val);
+	if (ret)
+		dev_err(cb->dev, "failed to get PWM mask\n");
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(lm3533_ctrlbank_get_pwm);
 
 MODULE_AUTHOR("Johan Hovold <jhovold@gmail.com>");
 MODULE_DESCRIPTION("LM3533 Control Bank interface");

drivers/mfd/lp873x.c

 /*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author: Keerthy <j-keerthy@ti.com>
  *

drivers/mfd/lp87565.c

 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author: Keerthy <j-keerthy@ti.com>
  */

drivers/mfd/madera-core.c

@@ -44,7 +44,10 @@ static const char * const madera_core_supplies[] = {
 };
 
 static const struct mfd_cell madera_ldo1_devs[] = {
-	{ .name = "madera-ldo1" },
+	{
+		.name = "madera-ldo1",
+		.level = MFD_DEP_LEVEL_HIGH,
+	},
 };
 
 static const char * const cs47l15_supplies[] = {
@@ -55,8 +58,8 @@ static const char * const cs47l15_supplies[] = {
 
 static const struct mfd_cell cs47l15_devs[] = {
 	{ .name = "madera-pinctrl", },
-	{ .name = "madera-irq" },
-	{ .name = "madera-gpio" },
+	{ .name = "madera-irq", },
+	{ .name = "madera-gpio", },
 	{
 		.name = "madera-extcon",
 		.parent_supplies = cs47l15_supplies,
@@ -108,7 +111,7 @@ static const char * const cs47l85_supplies[] = {
 static const struct mfd_cell cs47l85_devs[] = {
 	{ .name = "madera-pinctrl", },
 	{ .name = "madera-irq", },
-	{ .name = "madera-micsupp" },
+	{ .name = "madera-micsupp", },
 	{ .name = "madera-gpio", },
 	{
 		.name = "madera-extcon",
@@ -155,10 +158,10 @@ static const char * const cs47l92_supplies[] = {
 };
 
 static const struct mfd_cell cs47l92_devs[] = {
-	{ .name = "madera-pinctrl" },
+	{ .name = "madera-pinctrl", },
 	{ .name = "madera-irq", },
 	{ .name = "madera-micsupp", },
-	{ .name = "madera-gpio" },
+	{ .name = "madera-gpio", },
 	{
 		.name = "madera-extcon",
 		.parent_supplies = cs47l92_supplies,
@@ -743,18 +746,22 @@ int madera_dev_exit(struct madera *madera)
 	/* Prevent any IRQs being serviced while we clean up */
 	disable_irq(madera->irq);
 
-	/*
-	 * DCVDD could be supplied by a child node, we must disable it before
-	 * removing the children, and prevent PM runtime from turning it back on
-	 */
-	pm_runtime_disable(madera->dev);
+	pm_runtime_get_sync(madera->dev);
 
-	clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
+	mfd_remove_devices(madera->dev);
+
+	pm_runtime_disable(madera->dev);
 
 	regulator_disable(madera->dcvdd);
 	regulator_put(madera->dcvdd);
 
-	mfd_remove_devices(madera->dev);
+	mfd_remove_devices_late(madera->dev);
+
+	pm_runtime_set_suspended(madera->dev);
+	pm_runtime_put_noidle(madera->dev);
+
+	clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
+
 	madera_enable_hard_reset(madera);
 
 	regulator_bulk_disable(madera->num_core_supplies,

drivers/mfd/madera-i2c.c

@@ -88,7 +88,6 @@ static int madera_i2c_probe(struct i2c_client *i2c,
 	if (!madera)
 		return -ENOMEM;
 
-
 	madera->regmap = devm_regmap_init_i2c(i2c, regmap_16bit_config);
 	if (IS_ERR(madera->regmap)) {
 		ret = PTR_ERR(madera->regmap);

drivers/mfd/max14577.c

@@ -61,7 +61,7 @@ EXPORT_SYMBOL_GPL(maxim_charger_currents);
 int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
 		unsigned int min_ua, unsigned int max_ua, u8 *dst)
 {
-	unsigned int current_bits = 0xf;
+	unsigned int current_bits;
 
 	if (min_ua > max_ua)
 		return -EINVAL;

drivers/mfd/mfd-core.c

@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
+#include <linux/list.h>
 #include <linux/property.h>
 #include <linux/mfd/core.h>
 #include <linux/pm_runtime.h>
@@ -17,8 +18,17 @@
 #include <linux/module.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/regulator/consumer.h>
 
+static LIST_HEAD(mfd_of_node_list);
+
+struct mfd_of_node_entry {
+	struct list_head list;
+	struct device *dev;
+	struct device_node *np;
+};
+
 static struct device_type mfd_dev_type = {
 	.name	= "mfd_device",
 };
@@ -107,6 +117,55 @@ static inline void mfd_acpi_add_device(const struct mfd_cell *cell,
 }
 #endif
 
+static int mfd_match_of_node_to_dev(struct platform_device *pdev,
+				    struct device_node *np,
+				    const struct mfd_cell *cell)
+{
+#if IS_ENABLED(CONFIG_OF)
+	struct mfd_of_node_entry *of_entry;
+	const __be32 *reg;
+	u64 of_node_addr;
+
+	/* Skip devices 'disabled' by Device Tree */
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	/* Skip if OF node has previously been allocated to a device */
+	list_for_each_entry(of_entry, &mfd_of_node_list, list)
+		if (of_entry->np == np)
+			return -EAGAIN;
+
+	if (!cell->use_of_reg)
+		/* No of_reg defined - allocate first free compatible match */
+		goto allocate_of_node;
+
+	/* We only care about each node's first defined address */
+	reg = of_get_address(np, 0, NULL, NULL);
+	if (!reg)
+		/* OF node does not contatin a 'reg' property to match to */
+		return -EAGAIN;
+
+	of_node_addr = of_read_number(reg, of_n_addr_cells(np));
+
+	if (cell->of_reg != of_node_addr)
+		/* No match */
+		return -EAGAIN;
+
+allocate_of_node:
+	of_entry = kzalloc(sizeof(*of_entry), GFP_KERNEL);
+	if (!of_entry)
+		return -ENOMEM;
+
+	of_entry->dev = &pdev->dev;
+	of_entry->np = np;
+	list_add_tail(&of_entry->list, &mfd_of_node_list);
+
+	pdev->dev.of_node = np;
+	pdev->dev.fwnode = &np->fwnode;
+#endif
+	return 0;
+}
+
 static int mfd_add_device(struct device *parent, int id,
 			  const struct mfd_cell *cell,
 			  struct resource *mem_base,
@@ -115,6 +174,7 @@ static int mfd_add_device(struct device *parent, int id,
 	struct resource *res;
 	struct platform_device *pdev;
 	struct device_node *np = NULL;
+	struct mfd_of_node_entry *of_entry, *tmp;
 	int ret = -ENOMEM;
 	int platform_id;
 	int r;
@@ -149,19 +209,22 @@ static int mfd_add_device(struct device *parent, int id,
 	if (ret < 0)
 		goto fail_res;
 
-	if (parent->of_node && cell->of_compatible) {
+	if (IS_ENABLED(CONFIG_OF) && parent->of_node && cell->of_compatible) {
 		for_each_child_of_node(parent->of_node, np) {
 			if (of_device_is_compatible(np, cell->of_compatible)) {
-				if (!of_device_is_available(np)) {
-					/* Ignore disabled devices error free */
-					ret = 0;
+				ret = mfd_match_of_node_to_dev(pdev, np, cell);
+				if (ret == -EAGAIN)
+					continue;
+				if (ret)
 					goto fail_alias;
-				}
-				pdev->dev.of_node = np;
-				pdev->dev.fwnode = &np->fwnode;
+
 				break;
 			}
 		}
+
+		if (!pdev->dev.of_node)
+			pr_warn("%s: Failed to locate of_node [id: %d]\n",
+				cell->name, platform_id);
 	}
 
 	mfd_acpi_add_device(cell, pdev);
@@ -170,13 +233,13 @@ static int mfd_add_device(struct device *parent, int id,
 		ret = platform_device_add_data(pdev,
 					cell->platform_data, cell->pdata_size);
 		if (ret)
-			goto fail_alias;
+			goto fail_of_entry;
 	}
 
 	if (cell->properties) {
 		ret = platform_device_add_properties(pdev, cell->properties);
 		if (ret)
-			goto fail_alias;
+			goto fail_of_entry;
 	}
 
 	for (r = 0; r < cell->num_resources; r++) {
@@ -213,18 +276,18 @@ static int mfd_add_device(struct device *parent, int id,
 			if (has_acpi_companion(&pdev->dev)) {
 				ret = acpi_check_resource_conflict(&res[r]);
 				if (ret)
-					goto fail_alias;
+					goto fail_of_entry;
 			}
 		}
 	}
 
 	ret = platform_device_add_resources(pdev, res, cell->num_resources);
 	if (ret)
-		goto fail_alias;
+		goto fail_of_entry;
 
 	ret = platform_device_add(pdev);
 	if (ret)
-		goto fail_alias;
+		goto fail_of_entry;
 
 	if (cell->pm_runtime_no_callbacks)
 		pm_runtime_no_callbacks(&pdev->dev);
@@ -233,6 +296,12 @@ static int mfd_add_device(struct device *parent, int id,
 
 	return 0;
 
+fail_of_entry:
+	list_for_each_entry_safe(of_entry, tmp, &mfd_of_node_list, list)
+		if (of_entry->dev == &pdev->dev) {
+			list_del(&of_entry->list);
+			kfree(of_entry);
+		}
 fail_alias:
 	regulator_bulk_unregister_supply_alias(&pdev->dev,
 					       cell->parent_supplies,
@@ -287,6 +356,7 @@ static int mfd_remove_devices_fn(struct device *dev, void *data)
 {
 	struct platform_device *pdev;
 	const struct mfd_cell *cell;
+	int *level = data;
 
 	if (dev->type != &mfd_dev_type)
 		return 0;
@@ -294,16 +364,31 @@ static int mfd_remove_devices_fn(struct device *dev, void *data)
 	pdev = to_platform_device(dev);
 	cell = mfd_get_cell(pdev);
 
+	if (level && cell->level > *level)
+		return 0;
+
 	regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies,
 					       cell->num_parent_supplies);
 
+	kfree(cell);
+
 	platform_device_unregister(pdev);
 	return 0;
 }
 
+void mfd_remove_devices_late(struct device *parent)
+{
+	int level = MFD_DEP_LEVEL_HIGH;
+
+	device_for_each_child_reverse(parent, &level, mfd_remove_devices_fn);
+}
+EXPORT_SYMBOL(mfd_remove_devices_late);
+
 void mfd_remove_devices(struct device *parent)
 {
-	device_for_each_child_reverse(parent, NULL, mfd_remove_devices_fn);
+	int level = MFD_DEP_LEVEL_NORMAL;
+
+	device_for_each_child_reverse(parent, &level, mfd_remove_devices_fn);
 }
 EXPORT_SYMBOL(mfd_remove_devices);
 
@@ -318,6 +403,16 @@ static void devm_mfd_dev_release(struct device *dev, void *res)
  * Returns 0 on success or an appropriate negative error number on failure.
  * All child-devices of the MFD will automatically be removed when it gets
  * unbinded.
+ *
+ * @dev:	Pointer to parent device.
+ * @id:		Can be PLATFORM_DEVID_AUTO to let the Platform API take care
+ *		of device numbering, or will be added to a device's cell_id.
+ * @cells:	Array of (struct mfd_cell)s describing child devices.
+ * @n_devs:	Number of child devices to register.
+ * @mem_base:	Parent register range resource for child devices.
+ * @irq_base:	Base of the range of virtual interrupt numbers allocated for
+ *		this MFD device. Unused if @domain is specified.
+ * @domain:	Interrupt domain to create mappings for hardware interrupts.
  */
 int devm_mfd_add_devices(struct device *dev, int id,
 			 const struct mfd_cell *cells, int n_devs,

drivers/mfd/motorola-cpcap.c

@@ -214,6 +214,28 @@ static const struct regmap_config cpcap_regmap_config = {
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int cpcap_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	disable_irq(spi->irq);
+
+	return 0;
+}
+
+static int cpcap_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	enable_irq(spi->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cpcap_pm, cpcap_suspend, cpcap_resume);
+
 static const struct mfd_cell cpcap_mfd_devices[] = {
 	{
 		.name          = "cpcap_adc",
@@ -313,6 +335,7 @@ static struct spi_driver cpcap_driver = {
 	.driver = {
 		.name = "cpcap-core",
 		.of_match_table = cpcap_of_match,
+		.pm = &cpcap_pm,
 	},
 	.probe = cpcap_probe,
 };

drivers/mfd/omap-usb-host.c

@@ -2,7 +2,7 @@
 /**
  * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
  *
- * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com
  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  * Author: Roger Quadros <rogerq@ti.com>
  */
@@ -120,7 +120,7 @@ static inline u32 usbhs_read(void __iomem *base, u32 reg)
 
 /*-------------------------------------------------------------------------*/
 
-/**
+/*
  * Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
  * to the device tree binding portN-mode found in
  * 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
@@ -526,6 +526,8 @@ static const struct of_device_id usbhs_child_match_table[] = {
  * usbhs_omap_probe - initialize TI-based HCDs
  *
  * Allocates basic resources for this USB host controller.
+ *
+ * @pdev: Pointer to this device's platform device structure
  */
 static int usbhs_omap_probe(struct platform_device *pdev)
 {

drivers/mfd/omap-usb-tll.c

@@ -2,7 +2,7 @@
 /**
  * omap-usb-tll.c - The USB TLL driver for OMAP EHCI & OHCI
  *
- * Copyright (C) 2012-2013 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2012-2013 Texas Instruments Incorporated - https://www.ti.com
  * Author: Keshava Munegowda <keshava_mgowda@ti.com>
  * Author: Roger Quadros <rogerq@ti.com>
  */
@@ -199,6 +199,8 @@ static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode)
  * usbtll_omap_probe - initialize TI-based HCDs
  *
  * Allocates basic resources for this USB host controller.
+ *
+ * @pdev: Pointer to this device's platform device structure
  */
 static int usbtll_omap_probe(struct platform_device *pdev)
 {

drivers/mfd/rave-sp.c

@@ -96,7 +96,7 @@ struct rave_sp_deframer {
  * @data:	Buffer to store reply payload in
  * @code:	Expected reply code
  * @ackid:	Expected reply ACK ID
- * @completion: Successful reply reception completion
+ * @received:   Successful reply reception completion
  */
 struct rave_sp_reply {
 	size_t length;

drivers/mfd/rn5t618.c

@@ -44,6 +44,9 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
 	case RN5T618_INTMON:
 	case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
 	case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
+	case RN5T618_CHGSTATE:
+	case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
+	case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
 		return true;
 	default:
 		return false;
@@ -77,7 +80,7 @@ static const struct regmap_irq_chip rc5t619_irq_chip = {
 	.mask_invert = true,
 };
 
-static struct rn5t618 *rn5t618_pm_power_off;
+static struct i2c_client *rn5t618_pm_power_off;
 static struct notifier_block rn5t618_restart_handler;
 
 static int rn5t618_irq_init(struct rn5t618 *rn5t618)
@@ -110,13 +113,38 @@ static int rn5t618_irq_init(struct rn5t618 *rn5t618)
 
 static void rn5t618_trigger_poweroff_sequence(bool repower)
 {
+	int ret;
+
 	/* disable automatic repower-on */
-	regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
-			   RN5T618_REPCNT_REPWRON,
-			   repower ? RN5T618_REPCNT_REPWRON : 0);
+	ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT);
+	if (ret < 0)
+		goto err;
+
+	ret &= ~RN5T618_REPCNT_REPWRON;
+	if (repower)
+		ret |= RN5T618_REPCNT_REPWRON;
+
+	ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
+					RN5T618_REPCNT, (u8)ret);
+	if (ret < 0)
+		goto err;
+
 	/* start power-off sequence */
-	regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
-			   RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
+	ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT);
+	if (ret < 0)
+		goto err;
+
+	ret |= RN5T618_SLPCNT_SWPWROFF;
+
+	ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
+					RN5T618_SLPCNT, (u8)ret);
+	if (ret < 0)
+		goto err;
+
+	return;
+
+err:
+	dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret);
 }
 
 static void rn5t618_power_off(void)
@@ -189,7 +217,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c)
 		return ret;
 	}
 
-	rn5t618_pm_power_off = priv;
+	rn5t618_pm_power_off = i2c;
 	if (of_device_is_system_power_controller(i2c->dev.of_node)) {
 		if (!pm_power_off)
 			pm_power_off = rn5t618_power_off;
@@ -211,9 +239,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c)
 
 static int rn5t618_i2c_remove(struct i2c_client *i2c)
 {
-	struct rn5t618 *priv = i2c_get_clientdata(i2c);
-
-	if (priv == rn5t618_pm_power_off) {
+	if (i2c == rn5t618_pm_power_off) {
 		rn5t618_pm_power_off = NULL;
 		pm_power_off = NULL;
 	}

drivers/mfd/si476x-cmd.c

@@ -241,13 +241,13 @@ static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
 /**
  * si476x_core_send_command() - sends a command to si476x and waits its
  * response
- * @core:    si476x_device structure for the device we are
+ * @core:     si476x_device structure for the device we are
  *            communicating with
  * @command:  command id
  * @args:     command arguments we are sending
  * @argn:     actual size of @args
- * @response: buffer to place the expected response from the device
- * @respn:    actual size of @response
+ * @resp:     buffer to place the expected response from the device
+ * @respn:    actual size of @resp
  * @usecs:    amount of time to wait before reading the response (in
  *            usecs)
  *
@@ -496,7 +496,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
  *                             enable 1MOhm pulldown
  *      SI476X_DFS_DAUDIO    - set the pin to be a part of digital
  *                             audio interface
- * @dout - DOUT pin function configuration:
+ * @dout: - DOUT pin function configuration:
  *      SI476X_DOUT_NOOP       - do not modify the behaviour
  *      SI476X_DOUT_TRISTATE   - put the pin in tristate condition,
  *                               enable 1MOhm pulldown
@@ -504,7 +504,7 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
  *                               port 1
  *      SI476X_DOUT_I2S_INPUT  - set this pin to be digital in on I2S
  *                               port 1
- * @xout - XOUT pin function configuration:
+ * @xout: - XOUT pin function configuration:
  *	SI476X_XOUT_NOOP        - do not modify the behaviour
  *      SI476X_XOUT_TRISTATE    - put the pin in tristate condition,
  *                                enable 1MOhm pulldown
@@ -540,25 +540,25 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
 
 /**
  * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
- * @core - device to send the command to
- * @iqclk - IQCL pin function configuration:
+ * @core: - device to send the command to
+ * @iqclk: - IQCL pin function configuration:
  *       SI476X_IQCLK_NOOP     - do not modify the behaviour
  *       SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
  *                               enable 1MOhm pulldown
  *       SI476X_IQCLK_IQ       - set pin to be a part of I/Q interace
  *                               in master mode
- * @iqfs - IQFS pin function configuration:
+ * @iqfs: - IQFS pin function configuration:
  *       SI476X_IQFS_NOOP     - do not modify the behaviour
  *       SI476X_IQFS_TRISTATE - put the pin in tristate condition,
  *                              enable 1MOhm pulldown
  *       SI476X_IQFS_IQ       - set pin to be a part of I/Q interace
  *                              in master mode
- * @iout - IOUT pin function configuration:
+ * @iout: - IOUT pin function configuration:
  *       SI476X_IOUT_NOOP     - do not modify the behaviour
  *       SI476X_IOUT_TRISTATE - put the pin in tristate condition,
  *                              enable 1MOhm pulldown
  *       SI476X_IOUT_OUTPUT   - set pin to be I out
- * @qout - QOUT pin function configuration:
+ * @qout: - QOUT pin function configuration:
  *       SI476X_QOUT_NOOP     - do not modify the behaviour
  *       SI476X_QOUT_TRISTATE - put the pin in tristate condition,
  *                              enable 1MOhm pulldown
@@ -590,29 +590,29 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
 /**
  * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
  * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
- * @core - device to send the command to
- * @icin - ICIN pin function configuration:
+ * @core: - device to send the command to
+ * @icin: - ICIN pin function configuration:
  *      SI476X_ICIN_NOOP      - do not modify the behaviour
  *      SI476X_ICIN_TRISTATE  - put the pin in tristate condition,
  *                              enable 1MOhm pulldown
  *      SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high
  *      SI476X_ICIN_GPO1_LOW  - set pin to be an output, drive it low
  *      SI476X_ICIN_IC_LINK   - set the pin to be a part of Inter-Chip link
- * @icip - ICIP pin function configuration:
+ * @icip: - ICIP pin function configuration:
  *      SI476X_ICIP_NOOP      - do not modify the behaviour
  *      SI476X_ICIP_TRISTATE  - put the pin in tristate condition,
  *                              enable 1MOhm pulldown
  *      SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high
  *      SI476X_ICIP_GPO1_LOW  - set pin to be an output, drive it low
  *      SI476X_ICIP_IC_LINK   - set the pin to be a part of Inter-Chip link
- * @icon - ICON pin function configuration:
+ * @icon: - ICON pin function configuration:
  *      SI476X_ICON_NOOP     - do not modify the behaviour
  *      SI476X_ICON_TRISTATE - put the pin in tristate condition,
  *                             enable 1MOhm pulldown
  *      SI476X_ICON_I2S      - set the pin to be a part of audio
  *                             interface in slave mode (DCLK)
  *      SI476X_ICON_IC_LINK  - set the pin to be a part of Inter-Chip link
- * @icop - ICOP pin function configuration:
+ * @icop: - ICOP pin function configuration:
  *      SI476X_ICOP_NOOP     - do not modify the behaviour
  *      SI476X_ICOP_TRISTATE - put the pin in tristate condition,
  *                             enable 1MOhm pulldown
@@ -647,8 +647,8 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
 /**
  * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
  * device
- * @core - device to send the command to
- * @lrout - LROUT pin function configuration:
+ * @core: - device to send the command to
+ * @lrout: - LROUT pin function configuration:
  *       SI476X_LROUT_NOOP     - do not modify the behaviour
  *       SI476X_LROUT_TRISTATE - put the pin in tristate condition,
  *                               enable 1MOhm pulldown
@@ -675,15 +675,15 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
 
 /**
  * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
- * @core - device to send the command to
- * @intb - INTB pin function configuration:
+ * @core: - device to send the command to
+ * @intb: - INTB pin function configuration:
  *      SI476X_INTB_NOOP     - do not modify the behaviour
  *      SI476X_INTB_TRISTATE - put the pin in tristate condition,
  *                             enable 1MOhm pulldown
  *      SI476X_INTB_DAUDIO   - set pin to be a part of digital
  *                             audio interface in slave mode
  *      SI476X_INTB_IRQ      - set pin to be an interrupt request line
- * @a1 - A1 pin function configuration:
+ * @a1: - A1 pin function configuration:
  *      SI476X_A1_NOOP     - do not modify the behaviour
  *      SI476X_A1_TRISTATE - put the pin in tristate condition,
  *                           enable 1MOhm pulldown
@@ -728,14 +728,10 @@ static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
 /**
  * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
  * device
- * @core  - device to send the command to
- * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT,
- *           RSSSILINT, BLENDINT, MULTHINT and MULTLINT
- * @attune - when set the values in the status report are the values
- *           that were calculated at tune
- * @cancel - abort ongoing seek/tune opertation
- * @stcack - clear the STCINT bin in status register
- * @report - all signal quality information retured by the command
+ * @core:  - device to send the command to
+ * @rsqargs: - pointer to a structure containing a group of sub-args
+ *             relevant to sending the RSQ status command
+ * @report: - all signal quality information retured by the command
  *           (if NULL then the output of the command is ignored)
  *
  * Function returns 0 on success and negative error code on failure
@@ -862,9 +858,9 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
 /**
  * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
  * device
- * @core  - device to send the command to
- * @seekup - if set the direction of the search is 'up'
- * @wrap   - if set seek wraps when hitting band limit
+ * @core:  - device to send the command to
+ * @seekup: - if set the direction of the search is 'up'
+ * @wrap:   - if set seek wraps when hitting band limit
  *
  * This function begins search for a valid station. The station is
  * considered valid when 'FM_VALID_SNR_THRESHOLD' and
@@ -890,12 +886,14 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
 /**
  * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
  * device
- * @core - device to send the command to
- * @status_only - if set the data is not removed from RDSFIFO,
+ * @core: - device to send the command to
+ * @status_only: - if set the data is not removed from RDSFIFO,
  *                RDSFIFOUSED is not decremented and data in all the
  *                rest RDS data contains the last valid info received
- * @mtfifo if set the command clears RDS receive FIFO
- * @intack if set the command clards the RDSINT bit.
+ * @mtfifo: if set the command clears RDS receive FIFO
+ * @intack: if set the command clards the RDSINT bit.
+ * @report: - all signal quality information retured by the command
+ *           (if NULL then the output of the command is ignored)
  *
  * Function returns 0 on success and negative error code on failure
  */
@@ -1036,9 +1034,9 @@ EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
 /**
  * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
  * device
- * @core  - device to send the command to
- * @seekup - if set the direction of the search is 'up'
- * @wrap   - if set seek wraps when hitting band limit
+ * @core:  - device to send the command to
+ * @seekup: - if set the direction of the search is 'up'
+ * @wrap:   - if set seek wraps when hitting band limit
  *
  * This function begins search for a valid station. The station is
  * considered valid when 'FM_VALID_SNR_THRESHOLD' and

drivers/mfd/si476x-i2c.c

@@ -534,6 +534,11 @@ static irqreturn_t si476x_core_interrupt(int irq, void *dev)
 /**
  * si476x_firmware_version_to_revision()
  * @core: Core device structure
+ * @func: Selects the boot function of the device:
+ *         *_BOOTLOADER  - Boot loader
+ *         *_FM_RECEIVER - FM receiver
+ *         *_AM_RECEIVER - AM receiver
+ *         *_WB_RECEIVER - Weatherband receiver
  * @major:  Firmware major number
  * @minor1: Firmware first minor number
  * @minor2: Firmware second minor number
@@ -583,7 +588,7 @@ static int si476x_core_fwver_to_revision(struct si476x_core *core,
 			goto unknown_revision;
 		}
 	case SI476X_FUNC_BOOTLOADER:
-	default:		/* FALLTHROUG */
+	default:		/* FALLTHROUGH */
 		BUG();
 		return -1;
 	}

drivers/mfd/smsc-ece1099.c

-/*
- * TI SMSC MFD Driver
- *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
- *
- * Author: Sourav Poddar <sourav.poddar@ti.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under  the terms of the GNU General  Public License as published by the
- *  Free Software Foundation;  GPL v2.
- *
- */
-
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/workqueue.h>
-#include <linux/irq.h>
-#include <linux/regmap.h>
-#include <linux/err.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/smsc.h>
-#include <linux/of_platform.h>
-
-static const struct regmap_config smsc_regmap_config = {
-		.reg_bits = 8,
-		.val_bits = 8,
-		.max_register = SMSC_VEN_ID_H,
-		.cache_type = REGCACHE_RBTREE,
-};
-
-static int smsc_i2c_probe(struct i2c_client *i2c,
-			const struct i2c_device_id *id)
-{
-	struct smsc *smsc;
-	int devid, rev, venid_l, venid_h;
-	int ret;
-
-	smsc = devm_kzalloc(&i2c->dev, sizeof(*smsc), GFP_KERNEL);
-	if (!smsc)
-		return -ENOMEM;
-
-	smsc->regmap = devm_regmap_init_i2c(i2c, &smsc_regmap_config);
-	if (IS_ERR(smsc->regmap))
-		return PTR_ERR(smsc->regmap);
-
-	i2c_set_clientdata(i2c, smsc);
-	smsc->dev = &i2c->dev;
-
-#ifdef CONFIG_OF
-	of_property_read_u32(i2c->dev.of_node, "clock", &smsc->clk);
-#endif
-
-	regmap_read(smsc->regmap, SMSC_DEV_ID, &devid);
-	regmap_read(smsc->regmap, SMSC_DEV_REV, &rev);
-	regmap_read(smsc->regmap, SMSC_VEN_ID_L, &venid_l);
-	regmap_read(smsc->regmap, SMSC_VEN_ID_H, &venid_h);
-
-	dev_info(&i2c->dev, "SMSCxxx devid: %02x rev: %02x venid: %02x\n",
-		devid, rev, (venid_h << 8) | venid_l);
-
-	ret = regmap_write(smsc->regmap, SMSC_CLK_CTRL, smsc->clk);
-	if (ret)
-		return ret;
-
-#ifdef CONFIG_OF
-	if (i2c->dev.of_node)
-		ret = devm_of_platform_populate(&i2c->dev);
-#endif
-
-	return ret;
-}
-
-static const struct i2c_device_id smsc_i2c_id[] = {
-	{ "smscece1099", 0},
-	{},
-};
-
-static struct i2c_driver smsc_i2c_driver = {
-	.driver = {
-		   .name = "smsc",
-	},
-	.probe = smsc_i2c_probe,
-	.id_table = smsc_i2c_id,
-};
-builtin_i2c_driver(smsc_i2c_driver);

drivers/mfd/sprd-sc27xx-spi.c

@@ -7,7 +7,9 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mfd/core.h>
+#include <linux/mfd/sc27xx-pmic.h>
 #include <linux/of_device.h>
+#include <linux/of_platform.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
 #include <uapi/linux/usb/charger.h>
@@ -93,73 +95,6 @@ enum usb_charger_type sprd_pmic_detect_charger_type(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(sprd_pmic_detect_charger_type);
 
-static const struct mfd_cell sprd_pmic_devs[] = {
-	{
-		.name = "sc27xx-wdt",
-		.of_compatible = "sprd,sc2731-wdt",
-	}, {
-		.name = "sc27xx-rtc",
-		.of_compatible = "sprd,sc2731-rtc",
-	}, {
-		.name = "sc27xx-charger",
-		.of_compatible = "sprd,sc2731-charger",
-	}, {
-		.name = "sc27xx-chg-timer",
-		.of_compatible = "sprd,sc2731-chg-timer",
-	}, {
-		.name = "sc27xx-fast-chg",
-		.of_compatible = "sprd,sc2731-fast-chg",
-	}, {
-		.name = "sc27xx-chg-wdt",
-		.of_compatible = "sprd,sc2731-chg-wdt",
-	}, {
-		.name = "sc27xx-typec",
-		.of_compatible = "sprd,sc2731-typec",
-	}, {
-		.name = "sc27xx-flash",
-		.of_compatible = "sprd,sc2731-flash",
-	}, {
-		.name = "sc27xx-eic",
-		.of_compatible = "sprd,sc2731-eic",
-	}, {
-		.name = "sc27xx-efuse",
-		.of_compatible = "sprd,sc2731-efuse",
-	}, {
-		.name = "sc27xx-thermal",
-		.of_compatible = "sprd,sc2731-thermal",
-	}, {
-		.name = "sc27xx-adc",
-		.of_compatible = "sprd,sc2731-adc",
-	}, {
-		.name = "sc27xx-audio-codec",
-		.of_compatible = "sprd,sc2731-audio-codec",
-	}, {
-		.name = "sc27xx-regulator",
-		.of_compatible = "sprd,sc2731-regulator",
-	}, {
-		.name = "sc27xx-vibrator",
-		.of_compatible = "sprd,sc2731-vibrator",
-	}, {
-		.name = "sc27xx-keypad-led",
-		.of_compatible = "sprd,sc2731-keypad-led",
-	}, {
-		.name = "sc27xx-bltc",
-		.of_compatible = "sprd,sc2731-bltc",
-	}, {
-		.name = "sc27xx-fgu",
-		.of_compatible = "sprd,sc2731-fgu",
-	}, {
-		.name = "sc27xx-7sreset",
-		.of_compatible = "sprd,sc2731-7sreset",
-	}, {
-		.name = "sc27xx-poweroff",
-		.of_compatible = "sprd,sc2731-poweroff",
-	}, {
-		.name = "sc27xx-syscon",
-		.of_compatible = "sprd,sc2731-syscon",
-	},
-};
-
 static int sprd_pmic_spi_write(void *context, const void *data, size_t count)
 {
 	struct device *dev = context;
@@ -250,10 +185,8 @@ static int sprd_pmic_probe(struct spi_device *spi)
 		return -ENOMEM;
 
 	ddata->irq_chip.irqs = ddata->irqs;
-	for (i = 0; i < pdata->num_irqs; i++) {
-		ddata->irqs[i].reg_offset = i / pdata->num_irqs;
-		ddata->irqs[i].mask = BIT(i % pdata->num_irqs);
-	}
+	for (i = 0; i < pdata->num_irqs; i++)
+		ddata->irqs[i].mask = BIT(i);
 
 	ret = devm_regmap_add_irq_chip(&spi->dev, ddata->regmap, ddata->irq,
 				       IRQF_ONESHOT | IRQF_NO_SUSPEND, 0,
@@ -263,12 +196,9 @@ static int sprd_pmic_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	ret = devm_mfd_add_devices(&spi->dev, PLATFORM_DEVID_AUTO,
-				   sprd_pmic_devs, ARRAY_SIZE(sprd_pmic_devs),
-				   NULL, 0,
-				   regmap_irq_get_domain(ddata->irq_data));
+	ret = devm_of_platform_populate(&spi->dev);
 	if (ret) {
-		dev_err(&spi->dev, "Failed to register device %d\n", ret);
+		dev_err(&spi->dev, "Failed to populate sub-devices %d\n", ret);
 		return ret;
 	}
 

drivers/mfd/stm32-lptimer.c

@@ -17,6 +17,7 @@ static const struct regmap_config stm32_lptimer_regmap_cfg = {
 	.val_bits = 32,
 	.reg_stride = sizeof(u32),
 	.max_register = STM32_LPTIM_MAX_REGISTER,
+	.fast_io = true,
 };
 
 static int stm32_lptimer_detect_encoder(struct stm32_lptimer *ddata)

drivers/mfd/syscon.c

@@ -101,12 +101,14 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 		}
 	}
 
-	syscon_config.name = of_node_full_name(np);
+	syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np,
+				       (u64)res.start);
 	syscon_config.reg_stride = reg_io_width;
 	syscon_config.val_bits = reg_io_width * 8;
 	syscon_config.max_register = resource_size(&res) - reg_io_width;
 
 	regmap = regmap_init_mmio(NULL, base, &syscon_config);
+	kfree(syscon_config.name);
 	if (IS_ERR(regmap)) {
 		pr_err("regmap init failed\n");
 		ret = PTR_ERR(regmap);

drivers/mfd/tc3589x.c

@@ -18,7 +18,7 @@
 #include <linux/mfd/tc3589x.h>
 #include <linux/err.h>
 
-/**
+/*
  * enum tc3589x_version - indicates the TC3589x version
  */
 enum tc3589x_version {

drivers/mfd/ti_am335x_tscadc.c

 /*
  * TI Touch Screen / ADC MFD driver
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

drivers/mfd/tps65010.c

@@ -404,7 +404,6 @@ static void tps65010_work(struct work_struct *work)
 	tps65010_interrupt(tps);
 
 	if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
-		int	status;
 		u8	chgconfig, tmp;
 
 		chgconfig = i2c_smbus_read_byte_data(tps->client,
@@ -415,8 +414,8 @@ static void tps65010_work(struct work_struct *work)
 		else if (tps->vbus >= 100)
 			chgconfig |= TPS_VBUS_CHARGING;
 
-		status = i2c_smbus_write_byte_data(tps->client,
-				TPS_CHGCONFIG, chgconfig);
+		i2c_smbus_write_byte_data(tps->client,
+					  TPS_CHGCONFIG, chgconfig);
 
 		/* vbus update fails unless VBUS is connected! */
 		tmp = i2c_smbus_read_byte_data(tps->client, TPS_CHGCONFIG);

drivers/mfd/tps65086.c

 /*
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or

drivers/mfd/tps65217.c

@@ -3,7 +3,7 @@
  *
  * TPS65217 chip family multi-function driver
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -205,7 +205,7 @@ EXPORT_SYMBOL_GPL(tps65217_reg_read);
 /**
  * tps65217_reg_write: Write a single tps65217 register.
  *
- * @tps65217: Device to write to.
+ * @tps: Device to write to.
  * @reg: Register to write to.
  * @val: Value to write.
  * @level: Password protected level
@@ -250,7 +250,7 @@ EXPORT_SYMBOL_GPL(tps65217_reg_write);
 /**
  * tps65217_update_bits: Modify bits w.r.t mask, val and level.
  *
- * @tps65217: Device to write to.
+ * @tps: Device to write to.
  * @reg: Register to read-write to.
  * @mask: Mask.
  * @val: Value to write.

drivers/mfd/tps65218.c

 /*
  * Driver for TPS65218 Integrated power management chipsets
  *
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2 as
@@ -48,7 +48,7 @@ static const struct mfd_cell tps65218_cells[] = {
 /**
  * tps65218_reg_write: Write a single tps65218 register.
  *
- * @tps65218: Device to write to.
+ * @tps: Device to write to.
  * @reg: Register to write to.
  * @val: Value to write.
  * @level: Password protected level
@@ -79,7 +79,7 @@ EXPORT_SYMBOL_GPL(tps65218_reg_write);
 /**
  * tps65218_update_bits: Modify bits w.r.t mask, val and level.
  *
- * @tps65218: Device to write to.
+ * @tps: Device to write to.
  * @reg: Register to read-write to.
  * @mask: Mask.
  * @val: Value to write.

drivers/mfd/tps6586x.c

@@ -309,18 +309,19 @@ static const struct irq_domain_ops tps6586x_domain_ops = {
 static irqreturn_t tps6586x_irq(int irq, void *data)
 {
 	struct tps6586x *tps6586x = data;
-	u32 acks;
+	uint32_t acks;
+	__le32 val;
 	int ret = 0;
 
 	ret = tps6586x_reads(tps6586x->dev, TPS6586X_INT_ACK1,
-			     sizeof(acks), (uint8_t *)&acks);
+			     sizeof(acks), (uint8_t *)&val);
 
 	if (ret < 0) {
 		dev_err(tps6586x->dev, "failed to read interrupt status\n");
 		return IRQ_NONE;
 	}
 
-	acks = le32_to_cpu(acks);
+	acks = le32_to_cpu(val);
 
 	while (acks) {
 		int i = __ffs(acks);

drivers/mfd/tps65912-core.c

 /*
  * Core functions for TI TPS65912x PMICs
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or

drivers/mfd/tps65912-i2c.c

 /*
  * I2C access driver for TI TPS65912x PMICs
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or

drivers/mfd/tps65912-spi.c

 /*
  * SPI access driver for TI TPS65912x PMICs
  *
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or

drivers/mfd/twl4030-irq.c

@@ -477,7 +477,7 @@ static void twl4030_sih_bus_sync_unlock(struct irq_data *data)
 
 	if (agent->imr_change_pending) {
 		union {
-			u32	word;
+			__le32	word;
 			u8	bytes[4];
 		} imr;
 
@@ -561,7 +561,7 @@ static inline int sih_read_isr(const struct sih *sih)
 	int status;
 	union {
 		u8 bytes[4];
-		u32 word;
+		__le32 word;
 	} isr;
 
 	/* FIXME need retry-on-error ... */

drivers/mfd/wm831x-core.c

@@ -114,6 +114,8 @@ static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
  * The WM831x has a user key preventing writes to particularly
  * critical registers.  This function locks those registers,
  * allowing writes to them.
+ *
+ * @wm831x: pointer to local driver data structure
  */
 void wm831x_reg_lock(struct wm831x *wm831x)
 {
@@ -140,6 +142,8 @@ EXPORT_SYMBOL_GPL(wm831x_reg_lock);
  * The WM831x has a user key preventing writes to particularly
  * critical registers.  This function locks those registers,
  * preventing spurious writes.
+ *
+ * @wm831x: pointer to local driver data structure
  */
 int wm831x_reg_unlock(struct wm831x *wm831x)
 {

drivers/mfd/wm8350-core.c

@@ -131,6 +131,8 @@ EXPORT_SYMBOL_GPL(wm8350_block_write);
  * The WM8350 has a hardware lock which can be used to prevent writes to
  * some registers (generally those which can cause particularly serious
  * problems if misused).  This function enables that lock.
+ *
+ * @wm8350: pointer to local driver data structure
  */
 int wm8350_reg_lock(struct wm8350 *wm8350)
 {
@@ -160,6 +162,8 @@ EXPORT_SYMBOL_GPL(wm8350_reg_lock);
  * problems if misused).  This function disables that lock so updates
  * can be performed.  For maximum safety this should be done only when
  * required.
+ *
+ * @wm8350: pointer to local driver data structure
  */
 int wm8350_reg_unlock(struct wm8350 *wm8350)
 {

drivers/mfd/wm8400-core.c

@@ -108,6 +108,8 @@ static const struct regmap_config wm8400_regmap_config = {
 /**
  * wm8400_reset_codec_reg_cache - Reset cached codec registers to
  * their default values.
+ *
+ * @wm8400: pointer to local driver data structure
  */
 void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400)
 {

drivers/thermal/Kconfig

@@ -499,4 +499,15 @@ config SPRD_THERMAL
 	help
 	  Support for the Spreadtrum thermal sensor driver in the Linux thermal
 	  framework.
+
+config KHADAS_MCU_FAN_THERMAL
+	tristate "Khadas MCU controller FAN cooling support"
+	depends on OF || COMPILE_TEST
+	depends on MFD_KHADAS_MCU
+	select MFD_CORE
+	select REGMAP
+	help
+	  If you say yes here you get support for the FAN controlled
+	  by the Microcontroller found on the Khadas VIM boards.
+
 endif

drivers/thermal/Makefile

@@ -61,3 +61,4 @@ obj-$(CONFIG_ZX2967_THERMAL)	+= zx2967_thermal.o
 obj-$(CONFIG_UNIPHIER_THERMAL)	+= uniphier_thermal.o
 obj-$(CONFIG_AMLOGIC_THERMAL)     += amlogic_thermal.o
 obj-$(CONFIG_SPRD_THERMAL)	+= sprd_thermal.o
+obj-$(CONFIG_KHADAS_MCU_FAN_THERMAL)	+= khadas_mcu_fan.o

drivers/thermal/khadas_mcu_fan.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Khadas MCU Controlled FAN driver
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/khadas-mcu.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+#define MAX_LEVEL 3
+
+struct khadas_mcu_fan_ctx {
+	struct khadas_mcu *mcu;
+	unsigned int level;
+	struct thermal_cooling_device *cdev;
+};
+
+static int khadas_mcu_fan_set_level(struct khadas_mcu_fan_ctx *ctx,
+				    unsigned int level)
+{
+	int ret;
+
+	ret = regmap_write(ctx->mcu->regmap, KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
+			   level);
+	if (ret)
+		return ret;
+
+	ctx->level = level;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_get_max_state(struct thermal_cooling_device *cdev,
+					unsigned long *state)
+{
+	*state = MAX_LEVEL;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_get_cur_state(struct thermal_cooling_device *cdev,
+					unsigned long *state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	*state = ctx->level;
+
+	return 0;
+}
+
+static int
+khadas_mcu_fan_set_cur_state(struct thermal_cooling_device *cdev,
+			     unsigned long state)
+{
+	struct khadas_mcu_fan_ctx *ctx = cdev->devdata;
+
+	if (state > MAX_LEVEL)
+		return -EINVAL;
+
+	if (state == ctx->level)
+		return 0;
+
+	return khadas_mcu_fan_set_level(ctx, state);
+}
+
+static const struct thermal_cooling_device_ops khadas_mcu_fan_cooling_ops = {
+	.get_max_state = khadas_mcu_fan_get_max_state,
+	.get_cur_state = khadas_mcu_fan_get_cur_state,
+	.set_cur_state = khadas_mcu_fan_set_cur_state,
+};
+
+static int khadas_mcu_fan_probe(struct platform_device *pdev)
+{
+	struct khadas_mcu *mcu = dev_get_drvdata(pdev->dev.parent);
+	struct thermal_cooling_device *cdev;
+	struct device *dev = &pdev->dev;
+	struct khadas_mcu_fan_ctx *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	ctx->mcu = mcu;
+	platform_set_drvdata(pdev, ctx);
+
+	cdev = devm_thermal_of_cooling_device_register(dev->parent,
+			dev->parent->of_node, "khadas-mcu-fan", ctx,
+			&khadas_mcu_fan_cooling_ops);
+	if (IS_ERR(cdev)) {
+		ret = PTR_ERR(cdev);
+		dev_err(dev, "Failed to register khadas-mcu-fan as cooling device: %d\n",
+			ret);
+		return ret;
+	}
+	ctx->cdev = cdev;
+	thermal_cdev_update(cdev);
+
+	return 0;
+}
+
+static void khadas_mcu_fan_shutdown(struct platform_device *pdev)
+{
+	struct khadas_mcu_fan_ctx *ctx = platform_get_drvdata(pdev);
+
+	khadas_mcu_fan_set_level(ctx, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int khadas_mcu_fan_suspend(struct device *dev)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+	unsigned int level_save = ctx->level;
+	int ret;
+
+	ret = khadas_mcu_fan_set_level(ctx, 0);
+	if (ret)
+		return ret;
+
+	ctx->level = level_save;
+
+	return 0;
+}
+
+static int khadas_mcu_fan_resume(struct device *dev)
+{
+	struct khadas_mcu_fan_ctx *ctx = dev_get_drvdata(dev);
+
+	return khadas_mcu_fan_set_level(ctx, ctx->level);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(khadas_mcu_fan_pm, khadas_mcu_fan_suspend,
+			 khadas_mcu_fan_resume);
+
+static const struct platform_device_id khadas_mcu_fan_id_table[] = {
+	{ .name = "khadas-mcu-fan-ctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, khadas_mcu_fan_id_table);
+
+static struct platform_driver khadas_mcu_fan_driver = {
+	.probe		= khadas_mcu_fan_probe,
+	.shutdown	= khadas_mcu_fan_shutdown,
+	.driver	= {
+		.name		= "khadas-mcu-fan-ctrl",
+		.pm		= &khadas_mcu_fan_pm,
+	},
+	.id_table	= khadas_mcu_fan_id_table,
+};
+
+module_platform_driver(khadas_mcu_fan_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
+MODULE_DESCRIPTION("Khadas MCU FAN driver");
+MODULE_LICENSE("GPL");

include/linux/mfd/core.h

@@ -14,7 +14,7 @@
 
 #define MFD_RES_SIZE(arr) (sizeof(arr) / sizeof(struct resource))
 
-#define MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, _match)\
+#define MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, _of_reg, _use_of_reg, _match) \
 	{								\
 		.name = (_name),					\
 		.resources = (_res),					\
@@ -22,24 +22,32 @@
 		.platform_data = (_pdata),				\
 		.pdata_size = (_pdsize),				\
 		.of_compatible = (_compat),				\
+		.of_reg = (_of_reg),					\
+		.use_of_reg = (_use_of_reg),				\
 		.acpi_match = (_match),					\
 		.id = (_id),						\
 	}
 
-#define OF_MFD_CELL(_name, _res, _pdata, _pdsize,_id, _compat)		\
-	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, NULL)	\
+#define OF_MFD_CELL_REG(_name, _res, _pdata, _pdsize, _id, _compat, _of_reg) \
+	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, _of_reg, true, NULL)
 
-#define ACPI_MFD_CELL(_name, _res, _pdata, _pdsize, _id, _match)	\
-	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, _match)	\
+#define OF_MFD_CELL(_name, _res, _pdata, _pdsize, _id, _compat) \
+	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, _compat, 0, false, NULL)
 
-#define MFD_CELL_BASIC(_name, _res, _pdata, _pdsize, _id)		\
-	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, NULL)	\
+#define ACPI_MFD_CELL(_name, _res, _pdata, _pdsize, _id, _match) \
+	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, 0, false, _match)
 
-#define MFD_CELL_RES(_name, _res)					\
-	MFD_CELL_ALL(_name, _res, NULL, 0, 0, NULL, NULL)		\
+#define MFD_CELL_BASIC(_name, _res, _pdata, _pdsize, _id) \
+	MFD_CELL_ALL(_name, _res, _pdata, _pdsize, _id, NULL, 0, false, NULL)
 
-#define MFD_CELL_NAME(_name)						\
-	MFD_CELL_ALL(_name, NULL, NULL, 0, 0, NULL, NULL)		\
+#define MFD_CELL_RES(_name, _res) \
+	MFD_CELL_ALL(_name, _res, NULL, 0, 0, NULL, 0, false, NULL)
+
+#define MFD_CELL_NAME(_name) \
+	MFD_CELL_ALL(_name, NULL, NULL, 0, 0, NULL, 0, false, NULL)
+
+#define MFD_DEP_LEVEL_NORMAL 0
+#define MFD_DEP_LEVEL_HIGH 1
 
 struct irq_domain;
 struct property_entry;
@@ -58,6 +66,7 @@ struct mfd_cell_acpi_match {
 struct mfd_cell {
 	const char		*name;
 	int			id;
+	int			level;
 
 	int			(*enable)(struct platform_device *dev);
 	int			(*disable)(struct platform_device *dev);
@@ -78,6 +87,16 @@ struct mfd_cell {
 	 */
 	const char		*of_compatible;
 
+	/*
+	 * Address as defined in Device Tree.  Used to compement 'of_compatible'
+	 * (above) when matching OF nodes with devices that have identical
+	 * compatible strings
+	 */
+	const u64 of_reg;
+
+	/* Set to 'true' to use 'of_reg' (above) - allows for of_reg=0 */
+	bool use_of_reg;
+
 	/* Matches ACPI */
 	const struct mfd_cell_acpi_match	*acpi_match;
 
@@ -135,6 +154,7 @@ static inline int mfd_add_hotplug_devices(struct device *parent,
 }
 
 extern void mfd_remove_devices(struct device *parent);
+extern void mfd_remove_devices_late(struct device *parent);
 
 extern int devm_mfd_add_devices(struct device *dev, int id,
 				const struct mfd_cell *cells, int n_devs,

include/linux/mfd/da9055/pdata.h

@@ -35,7 +35,7 @@ struct da9055_pdata {
 	int *gpio_rsel;
 	/*
 	 * Regulator mode control bits value (GPI offset) that
-	 * that controls the regulator state, 0 if not available.
+	 * controls the regulator state, 0 if not available.
 	 */
 	enum gpio_select *reg_ren;
 	/*

include/linux/mfd/da9063/core.h

@@ -35,6 +35,7 @@ enum da9063_variant_codes {
 	PMIC_DA9063_AD = 0x3,
 	PMIC_DA9063_BB = 0x5,
 	PMIC_DA9063_CA = 0x6,
+	PMIC_DA9063_DA = 0x7,
 };
 
 /* Interrupts */

include/linux/mfd/da9063/registers.h

@@ -292,8 +292,10 @@
 #define	DA9063_BB_REG_GP_ID_19		0x134
 
 /* Chip ID and variant */
-#define	DA9063_REG_CHIP_ID		0x181
-#define	DA9063_REG_CHIP_VARIANT		0x182
+#define	DA9063_REG_DEVICE_ID		0x181
+#define	DA9063_REG_VARIANT_ID		0x182
+#define	DA9063_REG_CUSTOMER_ID		0x183
+#define	DA9063_REG_CONFIG_ID		0x184
 
 /*
  * PMIC registers bits
@@ -929,9 +931,6 @@
 #define	DA9063_RTC_CLOCK			0x40
 #define	DA9063_OUT_32K_EN			0x80
 
-/* DA9063_REG_CHIP_VARIANT */
-#define	DA9063_CHIP_VARIANT_SHIFT		4
-
 /* DA9063_REG_BUCK_ILIM_A (addr=0x9A) */
 #define DA9063_BIO_ILIM_MASK			0x0F
 #define DA9063_BMEM_ILIM_MASK			0xF0
@@ -1065,4 +1064,10 @@
 #define		DA9063_MON_A10_IDX_LDO9		0x04
 #define		DA9063_MON_A10_IDX_LDO10	0x05
 
+/* DA9063_REG_VARIANT_ID (addr=0x182) */
+#define	DA9063_VARIANT_ID_VRC_SHIFT		0
+#define DA9063_VARIANT_ID_VRC_MASK		0x0F
+#define	DA9063_VARIANT_ID_MRC_SHIFT		4
+#define DA9063_VARIANT_ID_MRC_MASK		0xF0
+
 #endif /* _DA9063_REG_H */

include/linux/mfd/hi6421-pmic.h

@@ -5,7 +5,7 @@
  * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
  *              http://www.hisilicon.com
  * Copyright (c) <2013-2014> Linaro Ltd.
- *              http://www.linaro.org
+ *              https://www.linaro.org
  *
  * Author: Guodong Xu <guodong.xu@linaro.org>
  */

include/linux/mfd/khadas-mcu.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Khadas System control Microcontroller Register map
+ *
+ * Copyright (C) 2020 BayLibre SAS
+ *
+ * Author(s): Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#ifndef MFD_KHADAS_MCU_H
+#define MFD_KHADAS_MCU_H
+
+#define KHADAS_MCU_PASSWD_VEN_0_REG		0x00 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_1_REG		0x01 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_2_REG		0x02 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_3_REG		0x03 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_4_REG		0x04 /* RO */
+#define KHADAS_MCU_PASSWD_VEN_5_REG		0x05 /* RO */
+#define KHADAS_MCU_MAC_0_REG			0x06 /* RO */
+#define KHADAS_MCU_MAC_1_REG			0x07 /* RO */
+#define KHADAS_MCU_MAC_2_REG			0x08 /* RO */
+#define KHADAS_MCU_MAC_3_REG			0x09 /* RO */
+#define KHADAS_MCU_MAC_4_REG			0x0a /* RO */
+#define KHADAS_MCU_MAC_5_REG			0x0b /* RO */
+#define KHADAS_MCU_USID_0_REG			0x0c /* RO */
+#define KHADAS_MCU_USID_1_REG			0x0d /* RO */
+#define KHADAS_MCU_USID_2_REG			0x0e /* RO */
+#define KHADAS_MCU_USID_3_REG			0x0f /* RO */
+#define KHADAS_MCU_USID_4_REG			0x10 /* RO */
+#define KHADAS_MCU_USID_5_REG			0x11 /* RO */
+#define KHADAS_MCU_VERSION_0_REG		0x12 /* RO */
+#define KHADAS_MCU_VERSION_1_REG		0x13 /* RO */
+#define KHADAS_MCU_DEVICE_NO_0_REG		0x14 /* RO */
+#define KHADAS_MCU_DEVICE_NO_1_REG		0x15 /* RO */
+#define KHADAS_MCU_FACTORY_TEST_REG		0x16 /* R */
+#define KHADAS_MCU_BOOT_MODE_REG		0x20 /* RW */
+#define KHADAS_MCU_BOOT_EN_WOL_REG		0x21 /* RW */
+#define KHADAS_MCU_BOOT_EN_RTC_REG		0x22 /* RW */
+#define KHADAS_MCU_BOOT_EN_EXP_REG		0x23 /* RW */
+#define KHADAS_MCU_BOOT_EN_IR_REG		0x24 /* RW */
+#define KHADAS_MCU_BOOT_EN_DCIN_REG		0x25 /* RW */
+#define KHADAS_MCU_BOOT_EN_KEY_REG		0x26 /* RW */
+#define KHADAS_MCU_KEY_MODE_REG			0x27 /* RW */
+#define KHADAS_MCU_LED_MODE_ON_REG		0x28 /* RW */
+#define KHADAS_MCU_LED_MODE_OFF_REG		0x29 /* RW */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_REG		0x2c /* RW */
+#define KHADAS_MCU_MAC_SWITCH_REG		0x2d /* RW */
+#define KHADAS_MCU_MCU_SLEEP_MODE_REG		0x2e /* RW */
+#define KHADAS_MCU_IR_CODE1_0_REG		0x2f /* RW */
+#define KHADAS_MCU_IR_CODE1_1_REG		0x30 /* RW */
+#define KHADAS_MCU_IR_CODE1_2_REG		0x31 /* RW */
+#define KHADAS_MCU_IR_CODE1_3_REG		0x32 /* RW */
+#define KHADAS_MCU_USB_PCIE_SWITCH_REG		0x33 /* RW */
+#define KHADAS_MCU_IR_CODE2_0_REG		0x34 /* RW */
+#define KHADAS_MCU_IR_CODE2_1_REG		0x35 /* RW */
+#define KHADAS_MCU_IR_CODE2_2_REG		0x36 /* RW */
+#define KHADAS_MCU_IR_CODE2_3_REG		0x37 /* RW */
+#define KHADAS_MCU_PASSWD_USER_0_REG		0x40 /* RW */
+#define KHADAS_MCU_PASSWD_USER_1_REG		0x41 /* RW */
+#define KHADAS_MCU_PASSWD_USER_2_REG		0x42 /* RW */
+#define KHADAS_MCU_PASSWD_USER_3_REG		0x43 /* RW */
+#define KHADAS_MCU_PASSWD_USER_4_REG		0x44 /* RW */
+#define KHADAS_MCU_PASSWD_USER_5_REG		0x45 /* RW */
+#define KHADAS_MCU_USER_DATA_0_REG		0x46 /* RW 56 bytes */
+#define KHADAS_MCU_PWR_OFF_CMD_REG		0x80 /* WO */
+#define KHADAS_MCU_PASSWD_START_REG		0x81 /* WO */
+#define KHADAS_MCU_CHECK_VEN_PASSWD_REG		0x82 /* WO */
+#define KHADAS_MCU_CHECK_USER_PASSWD_REG	0x83 /* WO */
+#define KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG	0x86 /* RO */
+#define KHADAS_MCU_WOL_INIT_START_REG		0x87 /* WO */
+#define KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG	0x88 /* WO */
+
+enum {
+	KHADAS_BOARD_VIM1 = 0x1,
+	KHADAS_BOARD_VIM2,
+	KHADAS_BOARD_VIM3,
+	KHADAS_BOARD_EDGE = 0x11,
+	KHADAS_BOARD_EDGE_V,
+};
+
+/**
+ * struct khadas_mcu - Khadas MCU structure
+ * @device:		device reference used for logs
+ * @regmap:		register map
+ */
+struct khadas_mcu {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#endif /* MFD_KHADAS_MCU_H */

include/linux/mfd/lp873x.h

 /*
  * Functions to access LP873X power management chip.
  *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

include/linux/mfd/lp87565.h

@@ -2,7 +2,7 @@
 /*
  * Functions to access LP87565 power management chip.
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #ifndef __LINUX_MFD_LP87565_H

include/linux/mfd/madera/pdata.h

@@ -21,7 +21,6 @@
 
 struct gpio_desc;
 struct pinctrl_map;
-struct madera_codec_pdata;
 
 /**
  * struct madera_pdata - Configuration data for Madera devices

include/linux/mfd/max77693-private.h

@@ -131,7 +131,7 @@ enum max77693_pmic_reg {
 #define FLASH_INT_FLED1_SHORT	BIT(3)
 #define FLASH_INT_OVER_CURRENT	BIT(4)
 
-/* Fast charge timer in in hours */
+/* Fast charge timer in hours */
 #define DEFAULT_FAST_CHARGE_TIMER		4
 /* microamps */
 #define DEFAULT_TOP_OFF_THRESHOLD_CURRENT	150000

include/linux/mfd/smsc.h

-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * SMSC ECE1099
- *
- * Copyright 2012 Texas Instruments Inc.
- *
- * Author: Sourav Poddar <sourav.poddar@ti.com>
- */
-
-#ifndef __LINUX_MFD_SMSC_H
-#define __LINUX_MFD_SMSC_H
-
-#include <linux/regmap.h>
-
-#define SMSC_ID_ECE1099			1
-#define SMSC_NUM_CLIENTS		2
-
-#define SMSC_BASE_ADDR			0x38
-#define OMAP_GPIO_SMSC_IRQ		151
-
-#define SMSC_MAXGPIO         32
-#define SMSC_BANK(offs)      ((offs) >> 3)
-#define SMSC_BIT(offs)       (1u << ((offs) & 0x7))
-
-struct smsc {
-	struct device *dev;
-	struct i2c_client *i2c_clients[SMSC_NUM_CLIENTS];
-	struct regmap *regmap;
-	int clk;
-	/* Stored chip id */
-	int id;
-};
-
-struct smsc_gpio;
-struct smsc_keypad;
-
-static inline int smsc_read(struct device *child, unsigned int reg,
-	unsigned int *dest)
-{
-	struct smsc     *smsc = dev_get_drvdata(child->parent);
-
-	return regmap_read(smsc->regmap, reg, dest);
-}
-
-static inline int smsc_write(struct device *child, unsigned int reg,
-	unsigned int value)
-{
-	struct smsc     *smsc = dev_get_drvdata(child->parent);
-
-	return regmap_write(smsc->regmap, reg, value);
-}
-
-/* Registers for SMSC */
-#define SMSC_RESET						0xF5
-#define SMSC_GRP_INT						0xF9
-#define SMSC_CLK_CTRL						0xFA
-#define SMSC_WKUP_CTRL						0xFB
-#define SMSC_DEV_ID						0xFC
-#define SMSC_DEV_REV						0xFD
-#define SMSC_VEN_ID_L						0xFE
-#define SMSC_VEN_ID_H						0xFF
-
-/* CLK VALUE */
-#define SMSC_CLK_VALUE						0x13
-
-/* Registers for function GPIO INPUT */
-#define SMSC_GPIO_DATA_IN_START					0x00
-
-/* Registers for function GPIO OUPUT */
-#define SMSC_GPIO_DATA_OUT_START                                       0x05
-
-/* Definitions for SMSC GPIO CONFIGURATION REGISTER*/
-#define SMSC_GPIO_INPUT_LOW					0x01
-#define SMSC_GPIO_INPUT_RISING					0x09
-#define SMSC_GPIO_INPUT_FALLING					0x11
-#define SMSC_GPIO_INPUT_BOTH_EDGE				0x19
-#define SMSC_GPIO_OUTPUT_PP					0x21
-#define SMSC_GPIO_OUTPUT_OP					0x31
-
-#define GRP_INT_STAT						0xf9
-#define	SMSC_GPI_INT						0x0f
-#define SMSC_CFG_START						0x0A
-
-/* Registers for SMSC GPIO INTERRUPT STATUS REGISTER*/
-#define SMSC_GPIO_INT_STAT_START                                  0x32
-
-/* Registers for SMSC GPIO INTERRUPT MASK REGISTER*/
-#define SMSC_GPIO_INT_MASK_START                               0x37
-
-/* Registers for SMSC function KEYPAD*/
-#define SMSC_KP_OUT						0x40
-#define SMSC_KP_IN						0x41
-#define SMSC_KP_INT_STAT					0x42
-#define SMSC_KP_INT_MASK					0x43
-
-/* Definitions for keypad */
-#define SMSC_KP_KSO           0x70
-#define SMSC_KP_KSI           0x51
-#define SMSC_KSO_ALL_LOW        0x20
-#define SMSC_KP_SET_LOW_PWR        0x0B
-#define SMSC_KP_SET_HIGH           0xFF
-#define SMSC_KSO_EVAL           0x00
-
-#endif /*  __LINUX_MFD_SMSC_H */

include/linux/mfd/stm32-lptimer.h

@@ -27,10 +27,15 @@
 #define STM32_LPTIM_CMPOK		BIT(3)
 
 /* STM32_LPTIM_ICR - bit fields */
+#define STM32_LPTIM_ARRMCF		BIT(1)
 #define STM32_LPTIM_CMPOKCF_ARROKCF	GENMASK(4, 3)
 
+/* STM32_LPTIM_IER - bit flieds */
+#define STM32_LPTIM_ARRMIE	BIT(1)
+
 /* STM32_LPTIM_CR - bit fields */
 #define STM32_LPTIM_CNTSTRT	BIT(2)
+#define STM32_LPTIM_SNGSTRT	BIT(1)
 #define STM32_LPTIM_ENABLE	BIT(0)
 
 /* STM32_LPTIM_CFGR - bit fields */

include/linux/mfd/ti_am335x_tscadc.h

@@ -4,7 +4,7 @@
 /*
  * TI Touch Screen / ADC MFD driver
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

include/linux/mfd/tps65086.h

 /*
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or

include/linux/mfd/tps65217.h

@@ -3,7 +3,7 @@
  *
  * Functions to access TPS65217 power management chip.
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

include/linux/mfd/tps65218.h

@@ -3,7 +3,7 @@
  *
  * Functions to access TPS65219 power management chip.
  *
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License version 2 as

include/linux/mfd/tps65912.h

 /*
- * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
  *	Andrew F. Davis <afd@ti.com>
  *
  * This program is free software; you can redistribute it and/or