Commit 886ab57c authored by David S. Miller's avatar David S. Miller

Merge tag 'linux-can-next-for-3.15-20140212' of git://gitorious.org/linux-can/linux-can-next

linux-can-next-for-3.15-20140212

Marc Kleine-Budde says:

====================
this is a pull request of eight patches for net-next/master.

Florian Vaussard contributed a series that merged the sja1000 of_platform
into the platform driver. The of_platform driver is finally removed.
Stephane Grosjean supplied a patch to allocate CANFD skbs. In a patch
by Uwe Kleine-König another missing copyright information was added to
a userspace header. And a patch by Yoann DI RUZZA that adds listen only
mode to the at91_can driver.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 3410f22e 17a50ee4
......@@ -12,6 +12,10 @@ Required properties:
Optional properties:
- reg-io-width : Specify the size (in bytes) of the IO accesses that
should be performed on the device. Valid value is 1, 2 or 4.
Default to 1 (8 bits).
- nxp,external-clock-frequency : Frequency of the external oscillator
clock in Hz. Note that the internal clock frequency used by the
SJA1000 is half of that value. If not specified, a default value
......
......@@ -420,7 +420,11 @@ static void at91_chip_start(struct net_device *dev)
at91_transceiver_switch(priv, 1);
/* enable chip */
at91_write(priv, AT91_MR, AT91_MR_CANEN);
if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
reg_mr = AT91_MR_CANEN | AT91_MR_ABM;
else
reg_mr = AT91_MR_CANEN;
at91_write(priv, AT91_MR, reg_mr);
priv->can.state = CAN_STATE_ERROR_ACTIVE;
......@@ -1341,7 +1345,8 @@ static int at91_can_probe(struct platform_device *pdev)
priv->can.bittiming_const = &at91_bittiming_const;
priv->can.do_set_mode = at91_set_mode;
priv->can.do_get_berr_counter = at91_get_berr_counter;
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
CAN_CTRLMODE_LISTENONLY;
priv->dev = dev;
priv->reg_base = addr;
priv->devtype_data = *devtype_data;
......
......@@ -512,6 +512,30 @@ struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
}
EXPORT_SYMBOL_GPL(alloc_can_skb);
struct sk_buff *alloc_canfd_skb(struct net_device *dev,
struct canfd_frame **cfd)
{
struct sk_buff *skb;
skb = netdev_alloc_skb(dev, sizeof(struct can_skb_priv) +
sizeof(struct canfd_frame));
if (unlikely(!skb))
return NULL;
skb->protocol = htons(ETH_P_CANFD);
skb->pkt_type = PACKET_BROADCAST;
skb->ip_summed = CHECKSUM_UNNECESSARY;
can_skb_reserve(skb);
can_skb_prv(skb)->ifindex = dev->ifindex;
*cfd = (struct canfd_frame *)skb_put(skb, sizeof(struct canfd_frame));
memset(*cfd, 0, sizeof(struct canfd_frame));
return skb;
}
EXPORT_SYMBOL_GPL(alloc_canfd_skb);
struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
{
struct sk_buff *skb;
......
......@@ -17,16 +17,9 @@ config CAN_SJA1000_PLATFORM
the "platform bus" (Linux abstraction for directly to the
processor attached devices). Which can be found on various
boards from Phytec (http://www.phytec.de) like the PCM027,
PCM038.
config CAN_SJA1000_OF_PLATFORM
tristate "Generic OF Platform Bus based SJA1000 driver"
depends on OF
---help---
This driver adds support for the SJA1000 chips connected to
the OpenFirmware "platform bus" found on embedded systems with
OpenFirmware bindings, e.g. if you have a PowerPC based system
you may want to enable this option.
PCM038. It also provides the OpenFirmware "platform bus" found
on embedded systems with OpenFirmware bindings, e.g. if you
have a PowerPC based system you may want to enable this option.
config CAN_EMS_PCMCIA
tristate "EMS CPC-CARD Card"
......
......@@ -5,7 +5,6 @@
obj-$(CONFIG_CAN_SJA1000) += sja1000.o
obj-$(CONFIG_CAN_SJA1000_ISA) += sja1000_isa.o
obj-$(CONFIG_CAN_SJA1000_PLATFORM) += sja1000_platform.o
obj-$(CONFIG_CAN_SJA1000_OF_PLATFORM) += sja1000_of_platform.o
obj-$(CONFIG_CAN_EMS_PCMCIA) += ems_pcmcia.o
obj-$(CONFIG_CAN_EMS_PCI) += ems_pci.o
obj-$(CONFIG_CAN_KVASER_PCI) += kvaser_pci.o
......
......@@ -106,8 +106,7 @@ static int sja1000_probe_chip(struct net_device *dev)
struct sja1000_priv *priv = netdev_priv(dev);
if (priv->reg_base && sja1000_is_absent(priv)) {
printk(KERN_INFO "%s: probing @0x%lX failed\n",
DRV_NAME, dev->base_addr);
netdev_err(dev, "probing failed\n");
return 0;
}
return -1;
......
/*
* Driver for SJA1000 CAN controllers on the OpenFirmware platform bus
*
* Copyright (C) 2008-2009 Wolfgang Grandegger <wg@grandegger.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the version 2 of the GNU General Public License
* as published by the Free Software Foundation
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
/* This is a generic driver for SJA1000 chips on the OpenFirmware platform
* bus found on embedded PowerPC systems. You need a SJA1000 CAN node
* definition in your flattened device tree source (DTS) file similar to:
*
* can@3,100 {
* compatible = "nxp,sja1000";
* reg = <3 0x100 0x80>;
* interrupts = <2 0>;
* interrupt-parent = <&mpic>;
* nxp,external-clock-frequency = <16000000>;
* };
*
* See "Documentation/devicetree/bindings/net/can/sja1000.txt" for further
* information.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/can/dev.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include "sja1000.h"
#define DRV_NAME "sja1000_of_platform"
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the OF platform bus");
MODULE_LICENSE("GPL v2");
#define SJA1000_OFP_CAN_CLOCK (16000000 / 2)
#define SJA1000_OFP_OCR OCR_TX0_PULLDOWN
#define SJA1000_OFP_CDR (CDR_CBP | CDR_CLK_OFF)
static u8 sja1000_ofp_read_reg(const struct sja1000_priv *priv, int reg)
{
return ioread8(priv->reg_base + reg);
}
static void sja1000_ofp_write_reg(const struct sja1000_priv *priv,
int reg, u8 val)
{
iowrite8(val, priv->reg_base + reg);
}
static int sja1000_ofp_remove(struct platform_device *ofdev)
{
struct net_device *dev = platform_get_drvdata(ofdev);
struct sja1000_priv *priv = netdev_priv(dev);
struct device_node *np = ofdev->dev.of_node;
struct resource res;
unregister_sja1000dev(dev);
free_sja1000dev(dev);
iounmap(priv->reg_base);
irq_dispose_mapping(dev->irq);
of_address_to_resource(np, 0, &res);
release_mem_region(res.start, resource_size(&res));
return 0;
}
static int sja1000_ofp_probe(struct platform_device *ofdev)
{
struct device_node *np = ofdev->dev.of_node;
struct net_device *dev;
struct sja1000_priv *priv;
struct resource res;
u32 prop;
int err, irq, res_size;
void __iomem *base;
err = of_address_to_resource(np, 0, &res);
if (err) {
dev_err(&ofdev->dev, "invalid address\n");
return err;
}
res_size = resource_size(&res);
if (!request_mem_region(res.start, res_size, DRV_NAME)) {
dev_err(&ofdev->dev, "couldn't request %pR\n", &res);
return -EBUSY;
}
base = ioremap_nocache(res.start, res_size);
if (!base) {
dev_err(&ofdev->dev, "couldn't ioremap %pR\n", &res);
err = -ENOMEM;
goto exit_release_mem;
}
irq = irq_of_parse_and_map(np, 0);
if (irq == 0) {
dev_err(&ofdev->dev, "no irq found\n");
err = -ENODEV;
goto exit_unmap_mem;
}
dev = alloc_sja1000dev(0);
if (!dev) {
err = -ENOMEM;
goto exit_dispose_irq;
}
priv = netdev_priv(dev);
priv->read_reg = sja1000_ofp_read_reg;
priv->write_reg = sja1000_ofp_write_reg;
err = of_property_read_u32(np, "nxp,external-clock-frequency", &prop);
if (!err)
priv->can.clock.freq = prop / 2;
else
priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
err = of_property_read_u32(np, "nxp,tx-output-mode", &prop);
if (!err)
priv->ocr |= prop & OCR_MODE_MASK;
else
priv->ocr |= OCR_MODE_NORMAL; /* default */
err = of_property_read_u32(np, "nxp,tx-output-config", &prop);
if (!err)
priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
else
priv->ocr |= OCR_TX0_PULLDOWN; /* default */
err = of_property_read_u32(np, "nxp,clock-out-frequency", &prop);
if (!err && prop) {
u32 divider = priv->can.clock.freq * 2 / prop;
if (divider > 1)
priv->cdr |= divider / 2 - 1;
else
priv->cdr |= CDR_CLKOUT_MASK;
} else {
priv->cdr |= CDR_CLK_OFF; /* default */
}
if (!of_property_read_bool(np, "nxp,no-comparator-bypass"))
priv->cdr |= CDR_CBP; /* default */
priv->irq_flags = IRQF_SHARED;
priv->reg_base = base;
dev->irq = irq;
dev_info(&ofdev->dev,
"reg_base=0x%p irq=%d clock=%d ocr=0x%02x cdr=0x%02x\n",
priv->reg_base, dev->irq, priv->can.clock.freq,
priv->ocr, priv->cdr);
platform_set_drvdata(ofdev, dev);
SET_NETDEV_DEV(dev, &ofdev->dev);
err = register_sja1000dev(dev);
if (err) {
dev_err(&ofdev->dev, "registering %s failed (err=%d)\n",
DRV_NAME, err);
goto exit_free_sja1000;
}
return 0;
exit_free_sja1000:
free_sja1000dev(dev);
exit_dispose_irq:
irq_dispose_mapping(irq);
exit_unmap_mem:
iounmap(base);
exit_release_mem:
release_mem_region(res.start, res_size);
return err;
}
static struct of_device_id sja1000_ofp_table[] = {
{.compatible = "nxp,sja1000"},
{},
};
MODULE_DEVICE_TABLE(of, sja1000_ofp_table);
static struct platform_driver sja1000_ofp_driver = {
.driver = {
.owner = THIS_MODULE,
.name = DRV_NAME,
.of_match_table = sja1000_ofp_table,
},
.probe = sja1000_ofp_probe,
.remove = sja1000_ofp_remove,
};
module_platform_driver(sja1000_ofp_driver);
......@@ -26,12 +26,16 @@
#include <linux/can/dev.h>
#include <linux/can/platform/sja1000.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include "sja1000.h"
#define DRV_NAME "sja1000_platform"
#define SP_CAN_CLOCK (16000000 / 2)
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
MODULE_ALIAS("platform:" DRV_NAME);
MODULE_LICENSE("GPL v2");
......@@ -66,59 +70,16 @@ static void sp_write_reg32(const struct sja1000_priv *priv, int reg, u8 val)
iowrite8(val, priv->reg_base + reg * 4);
}
static int sp_probe(struct platform_device *pdev)
static void sp_populate(struct sja1000_priv *priv,
struct sja1000_platform_data *pdata,
unsigned long resource_mem_flags)
{
int err;
void __iomem *addr;
struct net_device *dev;
struct sja1000_priv *priv;
struct resource *res_mem, *res_irq;
struct sja1000_platform_data *pdata;
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "No platform data provided!\n");
err = -ENODEV;
goto exit;
}
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_mem || !res_irq) {
err = -ENODEV;
goto exit;
}
if (!request_mem_region(res_mem->start, resource_size(res_mem),
DRV_NAME)) {
err = -EBUSY;
goto exit;
}
addr = ioremap_nocache(res_mem->start, resource_size(res_mem));
if (!addr) {
err = -ENOMEM;
goto exit_release;
}
dev = alloc_sja1000dev(0);
if (!dev) {
err = -ENOMEM;
goto exit_iounmap;
}
priv = netdev_priv(dev);
dev->irq = res_irq->start;
priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
priv->irq_flags |= IRQF_SHARED;
priv->reg_base = addr;
/* The CAN clock frequency is half the oscillator clock frequency */
priv->can.clock.freq = pdata->osc_freq / 2;
priv->ocr = pdata->ocr;
priv->cdr = pdata->cdr;
switch (res_mem->flags & IORESOURCE_MEM_TYPE_MASK) {
switch (resource_mem_flags & IORESOURCE_MEM_TYPE_MASK) {
case IORESOURCE_MEM_32BIT:
priv->read_reg = sp_read_reg32;
priv->write_reg = sp_write_reg32;
......@@ -133,6 +94,124 @@ static int sp_probe(struct platform_device *pdev)
priv->write_reg = sp_write_reg8;
break;
}
}
static void sp_populate_of(struct sja1000_priv *priv, struct device_node *of)
{
int err;
u32 prop;
err = of_property_read_u32(of, "reg-io-width", &prop);
if (err)
prop = 1; /* 8 bit is default */
switch (prop) {
case 4:
priv->read_reg = sp_read_reg32;
priv->write_reg = sp_write_reg32;
break;
case 2:
priv->read_reg = sp_read_reg16;
priv->write_reg = sp_write_reg16;
break;
case 1: /* fallthrough */
default:
priv->read_reg = sp_read_reg8;
priv->write_reg = sp_write_reg8;
}
err = of_property_read_u32(of, "nxp,external-clock-frequency", &prop);
if (!err)
priv->can.clock.freq = prop / 2;
else
priv->can.clock.freq = SP_CAN_CLOCK; /* default */
err = of_property_read_u32(of, "nxp,tx-output-mode", &prop);
if (!err)
priv->ocr |= prop & OCR_MODE_MASK;
else
priv->ocr |= OCR_MODE_NORMAL; /* default */
err = of_property_read_u32(of, "nxp,tx-output-config", &prop);
if (!err)
priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
else
priv->ocr |= OCR_TX0_PULLDOWN; /* default */
err = of_property_read_u32(of, "nxp,clock-out-frequency", &prop);
if (!err && prop) {
u32 divider = priv->can.clock.freq * 2 / prop;
if (divider > 1)
priv->cdr |= divider / 2 - 1;
else
priv->cdr |= CDR_CLKOUT_MASK;
} else {
priv->cdr |= CDR_CLK_OFF; /* default */
}
if (!of_property_read_bool(of, "nxp,no-comparator-bypass"))
priv->cdr |= CDR_CBP; /* default */
}
static int sp_probe(struct platform_device *pdev)
{
int err, irq = 0;
void __iomem *addr;
struct net_device *dev;
struct sja1000_priv *priv;
struct resource *res_mem, *res_irq = NULL;
struct sja1000_platform_data *pdata;
struct device_node *of = pdev->dev.of_node;
pdata = dev_get_platdata(&pdev->dev);
if (!pdata && !of) {
dev_err(&pdev->dev, "No platform data provided!\n");
return -ENODEV;
}
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_mem)
return -ENODEV;
if (!devm_request_mem_region(&pdev->dev, res_mem->start,
resource_size(res_mem), DRV_NAME))
return -EBUSY;
addr = devm_ioremap_nocache(&pdev->dev, res_mem->start,
resource_size(res_mem));
if (!addr)
return -ENOMEM;
if (of)
irq = irq_of_parse_and_map(of, 0);
else
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq && !res_irq)
return -ENODEV;
dev = alloc_sja1000dev(0);
if (!dev)
return -ENOMEM;
priv = netdev_priv(dev);
if (res_irq) {
irq = res_irq->start;
priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
priv->irq_flags |= IRQF_SHARED;
} else {
priv->irq_flags = IRQF_SHARED;
}
dev->irq = irq;
priv->reg_base = addr;
if (of)
sp_populate_of(priv, of);
else
sp_populate(priv, pdata, res_mem->flags);
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
......@@ -150,39 +229,32 @@ static int sp_probe(struct platform_device *pdev)
exit_free:
free_sja1000dev(dev);
exit_iounmap:
iounmap(addr);
exit_release:
release_mem_region(res_mem->start, resource_size(res_mem));
exit:
return err;
}
static int sp_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct sja1000_priv *priv = netdev_priv(dev);
struct resource *res;
unregister_sja1000dev(dev);
if (priv->reg_base)
iounmap(priv->reg_base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
free_sja1000dev(dev);
return 0;
}
static struct of_device_id sp_of_table[] = {
{.compatible = "nxp,sja1000"},
{},
};
MODULE_DEVICE_TABLE(of, sp_of_table);
static struct platform_driver sp_driver = {
.probe = sp_probe,
.remove = sp_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
.of_match_table = sp_of_table,
},
};
......
......@@ -124,6 +124,8 @@ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
void can_free_echo_skb(struct net_device *dev, unsigned int idx);
struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
struct sk_buff *alloc_canfd_skb(struct net_device *dev,
struct canfd_frame **cfd);
struct sk_buff *alloc_can_err_skb(struct net_device *dev,
struct can_frame **cf);
......
......@@ -8,6 +8,38 @@
* Copyright (c) 2002-2007 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*/
#ifndef CAN_H
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment