MIPS: ralink: Remove unused rt*_wdt_reset functions

All pointers to these functions were removed, so now they produce
warnings:

arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function]

This removes the functions. If we need them again, the patch can be
reverted later.

Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: John Crispin <john@phrozen.org>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/15044/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/ralink/rt288x.c

@@ -40,16 +40,6 @@ static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
 	{ 0 }
 };
 
-static void rt288x_wdt_reset(void)
-{
-	u32 t;
-
-	/* enable WDT reset output on pin SRAM_CS_N */
-	t = rt_sysc_r32(SYSC_REG_CLKCFG);
-	t |= CLKCFG_SRAM_CS_N_WDT;
-	rt_sysc_w32(t, SYSC_REG_CLKCFG);
-}
-
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, wmac_rate = 40000000;

arch/mips/ralink/rt305x.c

@@ -89,17 +89,6 @@ static struct rt2880_pmx_group rt5350_pinmux_data[] = {
 	{ 0 }
 };
 
-static void rt305x_wdt_reset(void)
-{
-	u32 t;
-
-	/* enable WDT reset output on pin SRAM_CS_N */
-	t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
-	t |= RT305X_SYSCFG_SRAM_CS0_MODE_WDT <<
-		RT305X_SYSCFG_SRAM_CS0_MODE_SHIFT;
-	rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
-}
-
 static unsigned long rt5350_get_mem_size(void)
 {
 	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);

arch/mips/ralink/rt3883.c

@@ -63,16 +63,6 @@ static struct rt2880_pmx_group rt3883_pinmux_data[] = {
 	{ 0 }
 };
 
-static void rt3883_wdt_reset(void)
-{
-	u32 t;
-
-	/* enable WDT reset output on GPIO 2 */
-	t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
-	t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
-	rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
-}
-
 void __init ralink_clk_init(void)
 {
 	unsigned long cpu_rate, sys_rate;