Merge tag 'omap-for-v4.20/dt-signed-v2' of...

Merge tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Devicetree changes for omap variants

This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.

The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.

* tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits)
  ARM: dts: add omap3-gta04a5one to Makefile
  ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio
  ARM: dts: am335x-boneblack: add cec support
  ARM: dts: am3517-evm: Add support for UI board and Audio
  ARM: dts: gta04: add serial console wakeup irq
  ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
  ARM: dts: omap: Update coresight bindings for hardware ports
  ARM: dts: ti: Fix SPI and I2C bus warnings
  ARM: dts: dra62x-j5eco-evm: get rid of phy_id property
  ARM: dts: dm8148-t410: get rid of phy_id property
  ARM: dts: dm8148-evm: get rid of phy_id property
  ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property
  ARM: dts: am57xx-idk-common: get rid of phy_id property
  ARM: dts: dra7-evm: get rid of phy_id property
  ARM: dts: dra71-evm: get rid of phy_id property
  ARM: dts: dra72-evm-revc: get rid of phy_id property
  ARM: dts: dra72-evm: get rid of phy_id property
  ARM: dts: dra76-evm: get rid of phy_id property
  ARM: dts: am437x-cm-t43: get rid of phy_id property
  ARM: dts: am437x-gp-evm: get rid of phy_id property
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/Makefile

@@ -653,6 +653,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-gta04a3.dtb \
 	omap3-gta04a4.dtb \
 	omap3-gta04a5.dtb \
+	omap3-gta04a5one.dtb \
 	omap3-ha.dtb \
 	omap3-ha-lcd.dtb \
 	omap3-igep0020.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -379,7 +379,7 @@ ldo4_reg: regulator@6 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 };
 
@@ -396,6 +396,10 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &mmc1 {

arch/arm/boot/dts/am335x-boneblack-common.dtsi

@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
@@ -88,9 +89,11 @@ lcdc_0: endpoint@0 {
 };
 
 &i2c0 {
-	tda19988: tda19988 {
+	tda19988: tda19988@70 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -140,10 +140,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 };
 

arch/arm/boot/dts/am335x-cm-t335.dts

@@ -486,10 +486,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 

arch/arm/boot/dts/am335x-evm.dts

@@ -713,6 +713,7 @@ &mac {
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -720,15 +721,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 

arch/arm/boot/dts/am335x-evmsk.dts

@@ -639,16 +639,24 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -102,15 +102,24 @@ &mac {
 
 &davinci_mdio {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 };
 

arch/arm/boot/dts/am335x-lxm.dts

@@ -317,13 +317,13 @@ &cppi41dma  {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <2>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <3>;
 };
@@ -345,6 +345,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	ethphy1: ethernet-phy@4 {
+		reg = <4>;
+	};
 };
 
 &mmc1 {

arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

@@ -422,18 +422,26 @@ &davinci_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
 &cpsw_emac0 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-nano.dts

@@ -380,16 +380,24 @@ &mac {
 
 &davinci_mdio {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-osd3358-sm-red.dts

@@ -161,7 +161,7 @@ ax8975@c {
 		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
 	};
 
-	bmp280: pressure@78 {
+	bmp280: pressure@76 {
 		compatible = "bosch,bmp280";
 		reg = <0x76>;
 	};

arch/arm/boot/dts/am335x-pdu001.dts

@@ -373,7 +373,7 @@ &spi1 {
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	cfaf240320a032t {
+	display-controller@0 {
 		compatible = "orisetech,otm3225a";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
@@ -533,16 +533,24 @@ &davinci_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-pepper.dts

@@ -265,13 +265,13 @@ AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 /* Ethernet */
 &cpsw_emac0 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
@@ -279,6 +279,14 @@ &davinci_mdio {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &mac {

arch/arm/boot/dts/am335x-shc.dts

@@ -206,7 +206,6 @@ &mac {
 	status = "okay";
 	slaves = <1>;
 	cpsw_emac0: slave@4a100200  {
-		phy_id = <&davinci_mdio>, <0>;
 		phy-mode = "mii";
 		phy-handle = <&ethernetphy0>;
 	};

arch/arm/boot/dts/am3517-evm-ui.dtsi

+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	codec1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_1>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	codec2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master2>;
+		simple-audio-card,frame-master = <&sound_master2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master2: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_2>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	expander-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		record {
+			label = "Record";
+			/* linux,code = <BTN_0>; */
+			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		play {
+			label = "Play";
+			linux,code = <KEY_PLAY>;
+			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+		};
+
+		Stop {
+			label = "Stop";
+			linux,code = <KEY_STOP>;
+			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		fwd {
+			label = "FWD";
+			linux,code = <KEY_FASTFORWARD>;
+			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+		};
+
+		rwd {
+			label = "RWD";
+			linux,code = <KEY_REWIND>;
+			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+		};
+
+		shift {
+			label = "Shift";
+			linux,code = <KEY_LEFTSHIFT>;
+			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		Mode {
+			label = "Mode";
+			linux,code = <BTN_MODE>;
+			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+		};
+
+		Menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+		};
+
+		Up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		Down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	/* Audio codecs */
+	tlv320aic23_1: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	tlv320aic23_2: codec@1b {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1b>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Audio codecs */
+	tlv320aic23_3: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	/* GPIO Expanders */
+	tca6416_2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	tca6416_3: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	/* TVP5146 Analog Video decoder input */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mcbsp1 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+};

arch/arm/boot/dts/am3517-evm.dts

@@ -9,6 +9,7 @@
 
 #include "am3517.dtsi"
 #include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {

arch/arm/boot/dts/am4372.dtsi

@@ -1101,7 +1101,7 @@ usb2: usb@483d0000 {
 			};
 		};
 
-		qspi: qspi@47900000 {
+		qspi: spi@47900000 {
 			compatible = "ti,am4372-qspi";
 			reg = <0x47900000 0x100>,
 			      <0x30000000 0x4000000>;

arch/arm/boot/dts/am437x-cm-t43.dts

@@ -339,16 +339,24 @@ &davinci_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -831,10 +831,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -499,10 +499,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -799,16 +799,24 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -575,10 +575,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@16 {
+		reg = <16>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 };
 

arch/arm/boot/dts/am571x-idk.dts

@@ -64,6 +64,82 @@ mmc0-led {
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {
@@ -71,6 +147,10 @@ &extcon_usb2 {
 	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
+&sn65hvs882 {
+	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
@@ -114,7 +194,3 @@ &mmc2 {
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};

arch/arm/boot/dts/am572x-idk-common.dtsi

@@ -55,6 +55,82 @@ mmc0-led {
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {

arch/arm/boot/dts/am572x-idk.dts

@@ -36,7 +36,3 @@ &mmc2 {
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -518,7 +518,7 @@ partition@100000 {
 	};
 
 	/* touch controller */
-	ads7846@0 {
+	touchscreen@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ads7846_pins>;
 
@@ -558,13 +558,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
@@ -573,6 +573,14 @@ &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_pins_default>;
 	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &usb2_phy1 {

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -372,17 +372,27 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &usb2_phy1 {
 	phy-supply = <&ldousb_reg>;
 };
@@ -478,3 +488,7 @@ partition@6 {
 		};
 	};
 };
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+};

arch/arm/boot/dts/dm8148-evm.dts

@@ -27,15 +27,25 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 

arch/arm/boot/dts/dm8148-t410.dts

@@ -36,15 +36,25 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc1 {
 	status = "disabled";
 };

arch/arm/boot/dts/dra62x-j5eco-evm.dts

@@ -27,15 +27,25 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 

arch/arm/boot/dts/dra7-evm.dts

@@ -512,17 +512,27 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &dcan1 {
 	status = "ok";
 	pinctrl-names = "default", "sleep", "active";

arch/arm/boot/dts/dra7.dtsi

@@ -1369,7 +1369,7 @@ mcspi4: spi@480ba000 {
 			status = "disabled";
 		};
 
-		qspi: qspi@4b300000 {
+		qspi: spi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
 			      <0x5c000000 0x4000000>;

arch/arm/boot/dts/dra71-evm.dts

@@ -203,13 +203,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -61,13 +61,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/dra72-evm.dts

@@ -51,10 +51,16 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &mmc1 {
 	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
 	pinctrl-0 = <&mmc1_pins_default>;

arch/arm/boot/dts/dra76-evm.dts

@@ -375,13 +375,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/keystone-k2g.dtsi

@@ -416,7 +416,7 @@ mmc1: mmc@23100000 {
 			clock-names = "fck", "mmchsdb_fck";
 		};
 
-		qspi: qspi@2940000 {
+		qspi: spi@2940000 {
 			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/omap2.dtsi

@@ -114,7 +114,7 @@ i2c2: i2c@48072000 {
 			dma-names = "tx", "rx";
 		};
 
-		mcspi1: mcspi@48098000 {
+		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@ mcspi1: mcspi@48098000 {
 				    "tx2", "rx2", "tx3", "rx3";
 		};
 
-		mcspi2: mcspi@4809a000 {
+		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;

arch/arm/boot/dts/omap2430.dtsi

@@ -285,7 +285,7 @@ timer1: timer@49018000 {
 			ti,timer-alwon;
 		};
 
-		mcspi3: mcspi@480b8000 {
+		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi3";
 			reg = <0x480b8000 0x100>;

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -160,13 +160,14 @@ etb@5401b000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
+		in-ports {
 			port {
 				etb_in: endpoint {
-				slave-mode;
 					remote-endpoint = <&etm_out>;
 				};
 			};
 		};
+	};
 
 	etm@54010000 {
 		compatible = "arm,coresight-etm3x", "arm,primecell";
@@ -174,12 +175,14 @@ etm@54010000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
+		out-ports {
 			port {
 				etm_out: endpoint {
 					remote-endpoint = <&etb_in>;
 				};
 			};
 		};
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/omap3-beagle.dts

@@ -147,13 +147,14 @@ etb@540000000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
+		in-ports {
 			port {
 				etb_in: endpoint {
-				slave-mode;
 					remote-endpoint = <&etm_out>;
 				};
 			};
 		};
+	};
 
 	etm@54010000 {
 		compatible = "arm,coresight-etm3x", "arm,primecell";
@@ -161,12 +162,14 @@ etm@54010000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
+		out-ports {
 			port {
 				etm_out: endpoint {
 					remote-endpoint = <&etb_in>;
 				};
 			};
 		};
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "OMAP3 GTA04";
@@ -28,6 +29,7 @@ memory@80000000 {
 
 	aliases {
 		display0 = &lcd;
+		display1 = &tv0;
 	};
 
 	/* fixed 26MHz oscillator */
@@ -42,12 +44,27 @@ gpio-keys {
 
 		aux-button {
 			label = "aux";
-			linux,code = <169>;
+			linux,code = <KEY_PHONE>;
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			wakeup-source;
 		};
 	};
 
+	antenna-detect {
+		compatible = "gpio-keys";
+
+		gps_antenna_button: gps-antenna-button {
+			label = "GPS_EXT_ANT";
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LINEIN_INSERT>;
+			gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+			interrupt-parent = <&gpio5>;
+			interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
 	sound {
 		compatible = "ti,omap-twl4030";
 		ti,model = "gta04";
@@ -78,7 +95,7 @@ gtm601_codec: gsm_codec {
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd {
+	spi_lcd: spi_lcd {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
@@ -131,7 +148,7 @@ hsusb2_phy: hsusb2_phy {
 	};
 
 	tv0: connector {
-		compatible = "svideo-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {
@@ -143,7 +160,7 @@ tv_connector_in: endpoint {
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
 
 		ports {
 			#address-cells = <1>;
@@ -169,6 +186,42 @@ wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>;	/* W2CBW003 reset through tca6507 */
 	};
+
+	/* devconf0 setup for mcbsp1 clock pins */
+	pinmux_mcbsp1@48002274 {
+		compatible = "pinctrl-single";
+		reg = <0x48002274 4>;   /* CONTROL_DEVCONF0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7>;	/* MCBSP1 CLK pinmux */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcbsp1_devconf0_pins>;
+		mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+			/*                   offset bits mask */
+			pinctrl-single,bits = <0x00 0x08 0x1c>;	/* set MCBSP1_CLKR */
+		};
+	};
+
+	/* devconf1 setup for tvout pins */
+	pinmux_tv_out@480022d8 {
+		compatible = "pinctrl-single";
+		reg = <0x480022d8 4>;	/* CONTROL_DEVCONF1 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,bit-per-mux;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x81>;	/* TV out pin control */
+		#pinctrl-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tv_acbias_devconf1_pins>;
+		tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+			/*			offset	bits	mask */
+			pinctrl-single,bits = <0x00 0x40800 0x40800>;	/* set TVOUTBYPASS and TVOUTACEN */
+		};
+	};
 };
 
 &omap3_pmx_core {
@@ -220,7 +273,7 @@ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_d
 		>;
 	};
 
-	backlight_pins: backlight_pins_pimnux {
+	backlight_pins: backlight_pins_pinmux {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3)		/* gpt11/gpio57 */
 		>;
@@ -265,6 +318,12 @@ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
 		>;
 	};
 
+	bmp085_pins: pinmux_bmp085_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+		>;
+	};
+
 	bma180_pins: pinmux_bma180_pins {
 		pinctrl-single,pins = <
 			OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
@@ -282,6 +341,78 @@ hmc5843_pins: pinmux_hmc5843_pins {
 			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 		>;
 	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+		>;
+	};
+
+	camera_pins: pinmux_camera_pins {
+		pinctrl-single,pins = <
+			/* set up parallel camera interface */
+			OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+			OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+			OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+			OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+			OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+			OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+			OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+			OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+			OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+			OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+		>;
+	};
+
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4)	/* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_clkr.mcbsp1_fsr */
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			/* mcbsp_clks is used as PENIRQ */
+			/* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp_clks */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2_dx */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dx */
+			OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0)	/* mcbsp3_dx.mcbsp3_dr */
+			OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_clkx */
+			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0)	/* mcbsp3_clkx.mcbsp3_fsx */
+		>;
+	};
+
+	mcbsp4_pins: pinmux_mcbsp4_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_clkx */
+			OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_clkx.mcbsp4_dr */
+			OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcbsp4_dx.mcbsp4_fsx */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -347,6 +478,8 @@ &i2c2 {
 	bmp085@77 {
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bmp085_pins>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
 	};
@@ -402,7 +535,7 @@ gta04_led4: green_power@4 {
 			reg = <0x4>;
 		};
 
-		wifi_reset: wifi_reset@6 {
+		wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
 			reg = <0x6>;
 			compatible = "gpio";
 		};
@@ -422,10 +555,19 @@ hmc5843@1e {
 	tsc2007@48 {
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <640>;
+		touchscreen-max-pressure = <1000>;
+		touchscreen-fuzz-x = <3>;
+		touchscreen-fuzz-y = <8>;
+		touchscreen-fuzz-pressure = <10>;
+		touchscreen-inverted-y;
 	};
 
 	/* RFID EEPROM */
@@ -462,6 +604,7 @@ &mmc1 {
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	ti,non-removable;
+	broken-cd;	/* hardware has no CD */
 };
 
 &mmc2 {
@@ -476,6 +619,19 @@ &mmc3 {
 	status = "disabled";
 };
 
+#define BIT(x) (1 << (x))
+&twl_gpio {
+	/* pullups: BIT(2) */
+	ti,pullups = <BIT(2)>;
+	/*
+	 * pulldowns:
+	 * BIT(0),  BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+			 BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
 &twl_keypad {
 	status = "disabled";
 };
@@ -493,6 +649,7 @@ &uart2 {
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
 };
 
 &charger {
@@ -510,7 +667,7 @@ &vaux1 {
 &vaux2 {
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
-	regulator-always-on;
+	regulator-always-on;	/* we should never switch off while vio is on! */
 };
 
 /* camera */
@@ -531,6 +688,12 @@ &vsim {
 	regulator-max-microvolt = <3150000>;
 };
 
+/* Needed to power the DPI pins */
+
+&vpll2 {
+	regulator-always-on;
+};
+
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = < &dss_dpi_pins >;
@@ -551,10 +714,14 @@ &venc {
 
 	vdda-supply = <&vdac>;
 
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	port {
+		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
-			ti,channels = <2>;
+			ti,channels = <1>;
 			ti,invert-polarity;
 		};
 	};
@@ -569,27 +736,27 @@ nand@0,0 {
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "ham1";
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <16>;
-		ti,nand-ecc-opt = "bch8";
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-		gpmc,sync-clk-ps = <0>;
+		gpmc,device-width = <2>;
 		gpmc,cs-on-ns = <0>;
 		gpmc,cs-rd-off-ns = <44>;
 		gpmc,cs-wr-off-ns = <44>;
 		gpmc,adv-on-ns = <6>;
 		gpmc,adv-rd-off-ns = <34>;
 		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-off-ns = <40>;
 		gpmc,oe-off-ns = <54>;
+		gpmc,we-off-ns = <40>;
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
-		gpmc,device-width = <2>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
+		gpmc,sync-clk-ps = <0>;
 
 		x-loader@0 {
 			label = "X-Loader";
@@ -598,28 +765,51 @@ x-loader@0 {
 
 		bootloaders@80000 {
 			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
+			reg = <0x80000 0x1c0000>;
 		};
 
-		bootloaders_env@260000 {
+		bootloaders_env@240000 {
 			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
+			reg = <0x240000 0x40000>;
 		};
 
 		kernel@280000 {
 			label = "Kernel";
-			reg = <0x280000 0x400000>;
+			reg = <0x280000 0x600000>;
 		};
 
-		filesystem@680000 {
+		filesystem@880000 {
 			label = "File System";
-			reg = <0x680000 0xf980000>;
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
 	};
 };
 
-&mcbsp2 {
-	status = "okay";
+&mcbsp1 { /* FM Transceiver PCM */
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+	status = "ok";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp4_pins>;
 };
 
 &hdqw1w {
@@ -627,6 +817,22 @@ &hdqw1w {
         pinctrl-0 = <&hdq_pins>;
 };
 
-&mcbsp4 {
-	status = "okay";
+/* image signal processor within OMAP3 SoC */
+&isp {
+	ports {
+		port@0 {
+			reg = <0>;
+			parallel_ep: endpoint {
+				ti,isp-clock-divisor = <1>;
+				ti,strobe-mode;
+				bus-width = <8>;/* Used data lines */
+				data-shift = <2>; /* Lines 9:2 are used */
+				hsync-active = <0>; /* Active low */
+				vsync-active = <1>; /* Active high */
+				data-active = <1>;/* Active high */
+				pclk-sample = <1>;/* Falling */
+			};
+		};
+		/* port@1 and port@2 are not used by GTA04 */
+	};
 };

arch/arm/boot/dts/omap3-gta04a3.dts

@@ -9,7 +9,7 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A3";
+	model = "Goldelico GTA04A3/Letux 2804";
 };
 
 &i2c2 {

arch/arm/boot/dts/omap3-gta04a4.dts

@@ -9,5 +9,5 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A4";
+	model = "Goldelico GTA04A4/Letux 2804";
 };

arch/arm/boot/dts/omap3-gta04a5.dts

 /*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,9 +9,132 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A5";
+	model = "Goldelico GTA04A5/Letux 2804";
 
 	sound {
 		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
 	};
+
+	wlan_en: wlan_en_regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
+
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pps_pins>;
+
+		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+	};
+
+};
+
+&gpio5 {
+	irda_en {
+		gpio-hog;
+		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+		output-high;	/* activate gpio_175 to disable IrDA receiver */
+	};
+};
+
+&omap3_pmx_core {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
+		>;
+	};
+
+	wlan_irq_pin: pinmux_wlan_irq_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
+		>;
+	};
+
+	irda_pins: pinmux_irda {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
+		>;
+	};
+
+	pps_pins: pinmux_pps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+		>;
+	};
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+	/delete-property/ reset-gpios;
+};
+
+&mmc2 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	cap-power-off-card;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wlan_irq_pin>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/delete-property/ mmc-pwrseq;
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&i2c2 {
+	/delete-node/ bmp085@77;
+	/delete-node/ bma180@41;
+	/delete-node/ itg3200@68;
+	/delete-node/ hmc5843@1e;
+
+	bmg160@69 {
+		compatible = "bosch,bmg160";
+		reg = <0x69>;
+	};
+
+	bmc150@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+	};
+
+	bmc150@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+	};
+
+	bme280@76 {
+		compatible = "bosch,bme280";
+		reg = <0x76>;
+	};
 };

arch/arm/boot/dts/omap3-gta04a5one.dts

+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04a5.dts"
+
+&omap3_pmx_core {
+	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+
+			/* address lines */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+
+			/* data lines, gpmc_d0..d7 not muxable according to TRM */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+
+			/*
+			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+			 */
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+};
+
+&gpmc {
+	/* switch inherited setup to OneNAND */
+
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	/delete-node/ nand@0,0;
+
+	onenand@0,0 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+
+		bootloaders_env@240000 {
+			label = "U-Boot Env";
+			reg = <0x240000 0x40000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x600000>;
+		};
+
+		filesystem@880000 {
+			label = "File System";
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+
+	};
+};

arch/arm/boot/dts/omap3-n9.dts

@@ -40,7 +40,7 @@ smia_1_1: endpoint {
 };
 
 &i2c3 {
-	ak8975@0f {
+	ak8975@f {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0f>;
 	};