Merge tag 'omap-for-v4.20/dt-signed-v2' of...

Merge tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Devicetree changes for omap variants

This branch contains a series of improvments for omap3-gta04 phone,
and a series of clean-up for am335x to remove the deprecated phy_id
property.

The rest is to configure am57xx-idk boards for leds, load trigger,
and smps, am3517-evm audio configuration, beaglebone hdmi cec support,
coresight binding update, and fixes for i2c and spi warnings.

* tag 'omap-for-v4.20/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (70 commits)
  ARM: dts: add omap3-gta04a5one to Makefile
  ARM: dts: omap3-gta04: add pulldown/up settings for twl4030 gpio
  ARM: dts: am335x-boneblack: add cec support
  ARM: dts: am3517-evm: Add support for UI board and Audio
  ARM: dts: gta04: add serial console wakeup irq
  ARM: dts: am57xx-idk-common: Hook smps12 regulator as cpu vdd-supply
  ARM: dts: omap: Update coresight bindings for hardware ports
  ARM: dts: ti: Fix SPI and I2C bus warnings
  ARM: dts: dra62x-j5eco-evm: get rid of phy_id property
  ARM: dts: dm8148-t410: get rid of phy_id property
  ARM: dts: dm8148-evm: get rid of phy_id property
  ARM: dts: am57xx-cl-som-am57x: get rid of phy_id property
  ARM: dts: am57xx-idk-common: get rid of phy_id property
  ARM: dts: dra7-evm: get rid of phy_id property
  ARM: dts: dra71-evm: get rid of phy_id property
  ARM: dts: dra72-evm-revc: get rid of phy_id property
  ARM: dts: dra72-evm: get rid of phy_id property
  ARM: dts: dra76-evm: get rid of phy_id property
  ARM: dts: am437x-cm-t43: get rid of phy_id property
  ARM: dts: am437x-gp-evm: get rid of phy_id property
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/Makefile

@@ -653,6 +653,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-gta04a3.dtb \
 	omap3-gta04a4.dtb \
 	omap3-gta04a5.dtb \
+	omap3-gta04a5one.dtb \
 	omap3-ha.dtb \
 	omap3-ha-lcd.dtb \
 	omap3-igep0020.dtb \

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -379,7 +379,7 @@ ldo4_reg: regulator@6 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 };
 
@@ -396,6 +396,10 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &mmc1 {

arch/arm/boot/dts/am335x-boneblack-common.dtsi

@@ -7,6 +7,7 @@
  */
 
 #include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 &ldo3_reg {
 	regulator-min-microvolt = <1800000>;
@@ -88,9 +89,11 @@ lcdc_0: endpoint@0 {
 };
 
 &i2c0 {
-	tda19988: tda19988 {
+	tda19988: tda19988@70 {
 		compatible = "nxp,tda998x";
 		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
 
 		pinctrl-names = "default", "off";
 		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;

arch/arm/boot/dts/am335x-chiliboard.dts

@@ -140,10 +140,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 };
 

arch/arm/boot/dts/am335x-cm-t335.dts

@@ -486,10 +486,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 

arch/arm/boot/dts/am335x-evm.dts

@@ -713,6 +713,7 @@ &mac {
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -720,15 +721,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 };
 

arch/arm/boot/dts/am335x-evmsk.dts

@@ -639,16 +639,24 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -102,15 +102,24 @@ &mac {
 
 &davinci_mdio {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 };
 

arch/arm/boot/dts/am335x-lxm.dts

@@ -317,13 +317,13 @@ &cppi41dma  {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <2>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <3>;
 };
@@ -345,6 +345,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	ethphy1: ethernet-phy@4 {
+		reg = <4>;
+	};
 };
 
 &mmc1 {

arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts

@@ -422,18 +422,26 @@ &davinci_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
 &cpsw_emac0 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-nano.dts

@@ -380,16 +380,24 @@ &mac {
 
 &davinci_mdio {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-osd3358-sm-red.dts

@@ -161,7 +161,7 @@ ax8975@c {
 		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
 	};
 
-	bmp280: pressure@78 {
+	bmp280: pressure@76 {
 		compatible = "bosch,bmp280";
 		reg = <0x76>;
 	};

arch/arm/boot/dts/am335x-pdu001.dts

@@ -373,7 +373,7 @@ &spi1 {
 	ti,pindir-d0-out-d1-in;
 	status = "okay";
 
-	cfaf240320a032t {
+	display-controller@0 {
 		compatible = "orisetech,otm3225a";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
@@ -533,16 +533,24 @@ &davinci_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am335x-pepper.dts

@@ -265,13 +265,13 @@ AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 /* Ethernet */
 &cpsw_emac0 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
 	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
@@ -279,6 +279,14 @@ &davinci_mdio {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &mac {

arch/arm/boot/dts/am335x-shc.dts

@@ -206,7 +206,6 @@ &mac {
 	status = "okay";
 	slaves = <1>;
 	cpsw_emac0: slave@4a100200  {
-		phy_id = <&davinci_mdio>, <0>;
 		phy-mode = "mii";
 		phy-handle = <&ethernetphy0>;
 	};

arch/arm/boot/dts/am3517-evm-ui.dtsi

+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	codec1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_1>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	codec2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master2>;
+		simple-audio-card,frame-master = <&sound_master2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master2: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_2>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	expander-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		record {
+			label = "Record";
+			/* linux,code = <BTN_0>; */
+			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		play {
+			label = "Play";
+			linux,code = <KEY_PLAY>;
+			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+		};
+
+		Stop {
+			label = "Stop";
+			linux,code = <KEY_STOP>;
+			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		fwd {
+			label = "FWD";
+			linux,code = <KEY_FASTFORWARD>;
+			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+		};
+
+		rwd {
+			label = "RWD";
+			linux,code = <KEY_REWIND>;
+			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+		};
+
+		shift {
+			label = "Shift";
+			linux,code = <KEY_LEFTSHIFT>;
+			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		Mode {
+			label = "Mode";
+			linux,code = <BTN_MODE>;
+			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+		};
+
+		Menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+		};
+
+		Up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		Down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	/* Audio codecs */
+	tlv320aic23_1: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	tlv320aic23_2: codec@1b {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1b>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Audio codecs */
+	tlv320aic23_3: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells= <0>;
+		status = "okay";
+	};
+
+	/* GPIO Expanders */
+	tca6416_2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	tca6416_3: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	/* TVP5146 Analog Video decoder input */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mcbsp1 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+	status = "ok";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+};

arch/arm/boot/dts/am3517-evm.dts

@@ -9,6 +9,7 @@
 
 #include "am3517.dtsi"
 #include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {

arch/arm/boot/dts/am4372.dtsi

@@ -1101,7 +1101,7 @@ usb2: usb@483d0000 {
 			};
 		};
 
-		qspi: qspi@47900000 {
+		qspi: spi@47900000 {
 			compatible = "ti,am4372-qspi";
 			reg = <0x47900000 0x100>,
 			      <0x30000000 0x4000000>;

arch/arm/boot/dts/am437x-cm-t43.dts

@@ -339,16 +339,24 @@ &davinci_mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&davinci_mdio_default>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -831,10 +831,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -499,10 +499,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -799,16 +799,24 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -575,10 +575,14 @@ &davinci_mdio {
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
 	status = "okay";
+
+	ethphy0: ethernet-phy@16 {
+		reg = <16>;
+	};
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
 };
 

arch/arm/boot/dts/am571x-idk.dts

@@ -64,6 +64,82 @@ mmc0-led {
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {
@@ -71,6 +147,10 @@ &extcon_usb2 {
 	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
 };
 
+&sn65hvs882 {
+	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
@@ -114,7 +194,3 @@ &mmc2 {
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};

arch/arm/boot/dts/am572x-idk-common.dtsi

@@ -55,6 +55,82 @@ mmc0-led {
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {

arch/arm/boot/dts/am572x-idk.dts

@@ -36,7 +36,3 @@ &mmc2 {
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
-
-&cpu0 {
-	vdd-supply = <&smps12_reg>;
-};

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -518,7 +518,7 @@ partition@100000 {
 	};
 
 	/* touch controller */
-	ads7846@0 {
+	touchscreen@1 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ads7846_pins>;
 
@@ -558,13 +558,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
@@ -573,6 +573,14 @@ &davinci_mdio {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_pins_default>;
 	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
 &usb2_phy1 {

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -372,17 +372,27 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &usb2_phy1 {
 	phy-supply = <&ldousb_reg>;
 };
@@ -478,3 +488,7 @@ partition@6 {
 		};
 	};
 };
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+};

arch/arm/boot/dts/dm8148-evm.dts

@@ -27,15 +27,25 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 

arch/arm/boot/dts/dm8148-t410.dts

@@ -36,15 +36,25 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &mmc1 {
 	status = "disabled";
 };

arch/arm/boot/dts/dra62x-j5eco-evm.dts

@@ -27,15 +27,25 @@ vmmcsd_fixed: fixedregulator0 {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
 

arch/arm/boot/dts/dra7-evm.dts

@@ -512,17 +512,27 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
 	dual_emac_res_vlan = <2>;
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &dcan1 {
 	status = "ok";
 	pinctrl-names = "default", "sleep", "active";

arch/arm/boot/dts/dra7.dtsi

@@ -1369,7 +1369,7 @@ mcspi4: spi@480ba000 {
 			status = "disabled";
 		};
 
-		qspi: qspi@4b300000 {
+		qspi: spi@4b300000 {
 			compatible = "ti,dra7xxx-qspi";
 			reg = <0x4b300000 0x100>,
 			      <0x5c000000 0x4000000>;

arch/arm/boot/dts/dra71-evm.dts

@@ -203,13 +203,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -61,13 +61,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/dra72-evm.dts

@@ -51,10 +51,16 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
 };
 
+&davinci_mdio {
+	ethphy0: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &mmc1 {
 	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
 	pinctrl-0 = <&mmc1_pins_default>;

arch/arm/boot/dts/dra76-evm.dts

@@ -375,13 +375,13 @@ &mac {
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+	phy-handle = <&dp83867_0>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+	phy-handle = <&dp83867_1>;
 	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };

arch/arm/boot/dts/keystone-k2g.dtsi

@@ -416,7 +416,7 @@ mmc1: mmc@23100000 {
 			clock-names = "fck", "mmchsdb_fck";
 		};
 
-		qspi: qspi@2940000 {
+		qspi: spi@2940000 {
 			compatible = "ti,k2g-qspi", "cdns,qspi-nor";
 			#address-cells = <1>;
 			#size-cells = <0>;

arch/arm/boot/dts/omap2.dtsi

@@ -114,7 +114,7 @@ i2c2: i2c@48072000 {
 			dma-names = "tx", "rx";
 		};
 
-		mcspi1: mcspi@48098000 {
+		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi1";
 			reg = <0x48098000 0x100>;
@@ -125,7 +125,7 @@ mcspi1: mcspi@48098000 {
 				    "tx2", "rx2", "tx3", "rx3";
 		};
 
-		mcspi2: mcspi@4809a000 {
+		mcspi2: spi@4809a000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi2";
 			reg = <0x4809a000 0x100>;

arch/arm/boot/dts/omap2430.dtsi

@@ -285,7 +285,7 @@ timer1: timer@49018000 {
 			ti,timer-alwon;
 		};
 
-		mcspi3: mcspi@480b8000 {
+		mcspi3: spi@480b8000 {
 			compatible = "ti,omap2-mcspi";
 			ti,hwmods = "mcspi3";
 			reg = <0x480b8000 0x100>;

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -160,10 +160,11 @@ etb@5401b000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etb_in: endpoint {
-				slave-mode;
-				remote-endpoint = <&etm_out>;
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
 			};
 		};
 	};
@@ -174,9 +175,11 @@ etm@54010000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etm_out: endpoint {
-				remote-endpoint = <&etb_in>;
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/omap3-beagle.dts

@@ -147,10 +147,11 @@ etb@540000000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etb_in: endpoint {
-				slave-mode;
-				remote-endpoint = <&etm_out>;
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
 			};
 		};
 	};
@@ -161,9 +162,11 @@ etm@54010000 {
 
 		clocks = <&emu_src_ck>;
 		clock-names = "apb_pclk";
-		port {
-			etm_out: endpoint {
-				remote-endpoint = <&etb_in>;
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/omap3-gta04a3.dts

@@ -9,7 +9,7 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A3";
+	model = "Goldelico GTA04A3/Letux 2804";
 };
 
 &i2c2 {

arch/arm/boot/dts/omap3-gta04a4.dts

@@ -9,5 +9,5 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A4";
+	model = "Goldelico GTA04A4/Letux 2804";
 };

arch/arm/boot/dts/omap3-gta04a5.dts

 /*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,9 +9,132 @@
 #include "omap3-gta04.dtsi"
 
 / {
-	model = "Goldelico GTA04A5";
+	model = "Goldelico GTA04A5/Letux 2804";
 
 	sound {
-		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;    /* GTA04A5 only */
+		ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>;	/* GTA04A5 only */
+	};
+
+	wlan_en: wlan_en_regulator {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_pins>;
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* GPIO_138 */
+
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pps_pins>;
+
+		gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+	};
+
+};
+
+&gpio5 {
+	irda_en {
+		gpio-hog;
+		gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+		output-high;	/* activate gpio_175 to disable IrDA receiver */
+	};
+};
+
+&omap3_pmx_core {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat5 = mmc3_dat1 = gpio137 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4)	/* mmc2_dat6 = mmc3_dat2 = gpio138 */
+		>;
+	};
+
+	wlan_irq_pin: pinmux_wlan_irq_pin {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4)	/* mmc2_dat7 = mmc3_dat3 = gpio139 */
+		>;
+	};
+
+	irda_pins: pinmux_irda {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* mcspi1_cs1 = gpio175 */
+		>;
+	};
+
+	pps_pins: pinmux_pps_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+		>;
+	};
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+	/delete-property/ reset-gpios;
+};
+
+&mmc2 {
+	vmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	cap-power-off-card;
+	non-removable;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wlan_irq_pin>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/delete-property/ mmc-pwrseq;
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_139 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&i2c2 {
+	/delete-node/ bmp085@77;
+	/delete-node/ bma180@41;
+	/delete-node/ itg3200@68;
+	/delete-node/ hmc5843@1e;
+
+	bmg160@69 {
+		compatible = "bosch,bmg160";
+		reg = <0x69>;
+	};
+
+	bmc150@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+	};
+
+	bmc150@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
+	};
+
+	bme280@76 {
+		compatible = "bosch,bme280";
+		reg = <0x76>;
 	};
 };

arch/arm/boot/dts/omap3-gta04a5one.dts

+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04a5.dts"
+
+&omap3_pmx_core {
+	model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+
+	gpmc_pins: pinmux_gpmc_pins {
+		pinctrl-single,pins = <
+
+			/* address lines */
+			OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a1.gpmc_a1 */
+			OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a2.gpmc_a2 */
+			OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0)       /* gpmc_a3.gpmc_a3 */
+
+			/* data lines, gpmc_d0..d7 not muxable according to TRM */
+			OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0)        /* gpmc_d8.gpmc_d8 */
+			OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0)        /* gpmc_d9.gpmc_d9 */
+			OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0)        /* gpmc_d10.gpmc_d10 */
+			OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0)        /* gpmc_d11.gpmc_d11 */
+			OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0)        /* gpmc_d12.gpmc_d12 */
+			OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0)        /* gpmc_d13.gpmc_d13 */
+			OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0)        /* gpmc_d14.gpmc_d14 */
+			OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0)        /* gpmc_d15.gpmc_d15 */
+
+			/*
+			 * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+			 * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+			 */
+			OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_ncs1.gpmc_ncs1 */
+			OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0)        /* gpmc_clk.gpmc_clk */
+		>;
+	};
+};
+
+&gpmc {
+	/* switch inherited setup to OneNAND */
+
+	ranges = <0 0 0x04000000 0x1000000>;	/* CS0: 16MB for OneNAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmc_pins>;
+
+	/delete-node/ nand@0,0;
+
+	onenand@0,0 {
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "ti,omap2-onenand";
+		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */
+
+		gpmc,sync-read;
+		gpmc,sync-write;
+		gpmc,burst-length = <16>;
+		gpmc,burst-read;
+		gpmc,burst-wrap;
+		gpmc,burst-write;
+		gpmc,device-width = <2>;
+		gpmc,mux-add-data = <2>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <87>;
+		gpmc,cs-wr-off-ns = <87>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <10>;
+		gpmc,adv-wr-off-ns = <10>;
+		gpmc,oe-on-ns = <15>;
+		gpmc,oe-off-ns = <87>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <87>;
+		gpmc,rd-cycle-ns = <112>;
+		gpmc,wr-cycle-ns = <112>;
+		gpmc,access-ns = <81>;
+		gpmc,page-burst-access-ns = <15>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <5>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <81>;
+		gpmc,sync-clk-ps = <15000>;
+
+		x-loader@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+
+		bootloaders_env@240000 {
+			label = "U-Boot Env";
+			reg = <0x240000 0x40000>;
+		};
+
+		kernel@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x600000>;
+		};
+
+		filesystem@880000 {
+			label = "File System";
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+
+	};
+};

arch/arm/boot/dts/omap3-n9.dts

@@ -40,7 +40,7 @@ smia_1_1: endpoint {
 };
 
 &i2c3 {
-	ak8975@0f {
+	ak8975@f {
 		compatible = "asahi-kasei,ak8975";
 		reg = <0x0f>;
 	};