Commit 88e9a93c authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle

MIPS: Alchemy: Determine cohereny at runtime based on cpu type

All Alchemy chips have coherent DMA, but for example the USB or AC97
peripherals on the Au1000/1500/1100 are not.
This patch uses DMA_MAYBE_COHERENT on Alchemy and sets coherentio based
on CPU type.
Signed-off-by: default avatarManuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/6576/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 8005711c
......@@ -63,6 +63,7 @@ config MIPS_ALCHEMY
select CEVT_R4K
select CSRC_R4K
select IRQ_CPU
select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
......
......@@ -20,7 +20,6 @@ choice
config MIPS_MTX1
bool "4G Systems MTX-1 board"
select DMA_NONCOHERENT
select HW_HAS_PCI
select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
......@@ -29,7 +28,6 @@ config MIPS_MTX1
config MIPS_DB1000
bool "Alchemy DB1000/DB1500/DB1100 PB1500/1100 boards"
select ALCHEMY_GPIOINT_AU1000
select DMA_NONCOHERENT
select HW_HAS_PCI
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_LITTLE_ENDIAN
......@@ -39,13 +37,11 @@ config MIPS_DB1235
bool "Alchemy DB1200/PB1200/DB1300/DB1550/PB1550 boards"
select ARCH_REQUIRE_GPIOLIB
select HW_HAS_PCI
select DMA_COHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
config MIPS_XXS1500
bool "MyCable XXS1500 board"
select DMA_NONCOHERENT
select ALCHEMY_GPIOINT_AU1000
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
......@@ -54,7 +50,6 @@ config MIPS_GPR
bool "Trapeze ITS GPR board"
select ALCHEMY_GPIOINT_AU1000
select HW_HAS_PCI
select DMA_NONCOHERENT
select SYS_SUPPORTS_LITTLE_ENDIAN
select SYS_HAS_EARLY_PRINTK
......
......@@ -30,6 +30,7 @@
#include <linux/jiffies.h>
#include <linux/module.h>
#include <asm/dma-coherence.h>
#include <asm/mipsregs.h>
#include <asm/time.h>
......@@ -59,6 +60,15 @@ void __init plat_mem_setup(void)
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
hw_coherentio = 0;
coherentio = 1;
switch (alchemy_get_cputype()) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1100:
coherentio = 0;
}
board_setup(); /* board specific setup */
/* IO/MEM resources. */
......
......@@ -16,6 +16,7 @@
#include <linux/syscore_ops.h>
#include <linux/vmalloc.h>
#include <asm/dma-coherence.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/tlbmisc.h>
......@@ -411,17 +412,15 @@ static int alchemy_pci_probe(struct platform_device *pdev)
}
ctx->alchemy_pci_ctrl.io_map_base = (unsigned long)virt_io;
#ifdef CONFIG_DMA_NONCOHERENT
/* Au1500 revisions older than AD have borked coherent PCI */
if ((alchemy_get_cputype() == ALCHEMY_CPU_AU1500) &&
(read_c0_prid() < 0x01030202)) {
(read_c0_prid() < 0x01030202) && !coherentio) {
val = __raw_readl(ctx->regs + PCI_REG_CONFIG);
val |= PCI_CONFIG_NC;
__raw_writel(val, ctx->regs + PCI_REG_CONFIG);
wmb();
dev_info(&pdev->dev, "non-coherent PCI on Au1500 AA/AB/AC\n");
}
#endif
if (pd->board_map_irq)
ctx->board_map_irq = pd->board_map_irq;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment