ARM: dts: sun8i: a33: Add the DSI-related nodes

The A33 has a MIPI-DSI block, along with its D-PHY. Let's add it in order
to use it in the relevant boards.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

arch/arm/boot/dts/sun8i-a33.dtsi

@@ -236,6 +236,11 @@ tcon0_out: port@1 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <1>;
+
+					tcon0_out_dsi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&dsi_in_tcon0>;
+					};
 				};
 			};
 		};
@@ -280,6 +285,45 @@ ths: ths@1c25000 {
 			#io-channel-cells = <0>;
 		};
 
+		dsi: dsi@1ca0000 {
+			compatible = "allwinner,sun6i-a31-mipi-dsi";
+			reg = <0x01ca0000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_SCLK>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			phys = <&dphy>;
+			phy-names = "dphy";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					dsi_in_tcon0: endpoint {
+						remote-endpoint = <&tcon0_out_dsi>;
+					};
+				};
+			};
+		};
+
+		dphy: d-phy@1ca1000 {
+			compatible = "allwinner,sun6i-a31-mipi-dphy";
+			reg = <0x01ca1000 0x1000>;
+			clocks = <&ccu CLK_BUS_MIPI_DSI>,
+				 <&ccu CLK_DSI_DPHY>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_MIPI_DSI>;
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		fe0: display-frontend@1e00000 {
 			compatible = "allwinner,sun8i-a33-display-frontend";
 			reg = <0x01e00000 0x20000>;