Commit 890a96a2 authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Kevin Hilman

ARM64: dts: meson-gx: add the missing uart_AO_B

This adds the missing node for the uart_AO_B port to the meson-gx.dtsi
(as this is supported by GXBB, GXL and GXM) along with the required
pinctrl pins. This is required as some boards are using it (the boards
from the Khadas VIM series for example have it exposed on the pin
headers).
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent 5a582cff
...@@ -324,6 +324,14 @@ uart_AO: serial@4c0 { ...@@ -324,6 +324,14 @@ uart_AO: serial@4c0 {
status = "disabled"; status = "disabled";
}; };
uart_AO_B: serial@4e0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004e0 0x0 0x14>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>;
status = "disabled";
};
ir: ir@580 { ir: ir@580 {
compatible = "amlogic,meson-gxbb-ir"; compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>; reg = <0x0 0x00580 0x0 0x40>;
......
...@@ -138,6 +138,13 @@ mux { ...@@ -138,6 +138,13 @@ mux {
}; };
}; };
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao { remote_input_ao_pins: remote_input_ao {
mux { mux {
groups = "remote_input_ao"; groups = "remote_input_ao";
......
...@@ -88,6 +88,13 @@ mux { ...@@ -88,6 +88,13 @@ mux {
}; };
}; };
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_tx_ao_b", "uart_rx_ao_b";
function = "uart_ao_b";
};
};
remote_input_ao_pins: remote_input_ao { remote_input_ao_pins: remote_input_ao {
mux { mux {
groups = "remote_input_ao"; groups = "remote_input_ao";
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment