PPC32: Extend CPU and idle handling for new 7xx/7xxx PPC cpus.

arch/ppc/Makefile

@@ -43,6 +43,9 @@ head-$(CONFIG_4xx)		:= head_4xx.o
 head-$(CONFIG_440)		:= head_44x.o
 
 HEAD := arch/ppc/kernel/$(head-y)
+ifdef CONFIG_6xx
+  HEAD += arch/ppc/kernel/idle_6xx.o
+endif
 
 core-y				+= arch/ppc/kernel/ arch/ppc/platforms/ \
 				   arch/ppc/mm/ arch/ppc/lib/ arch/ppc/syslib/

arch/ppc/kernel/Makefile

@@ -14,6 +14,7 @@ HEAD-y				:= head.o
 HEAD-$(CONFIG_40x)		:= head_4xx.o
 HEAD-$(CONFIG_8xx)		:= head_8xx.o
 HEAD-$(CONFIG_PPC_ISERIES)	:= iSeries_head.o
+HEAD-$(CONFIG_6xx)		+= idle_6xx.o
 
 EXTRA_TARGETS	:= $(HEAD-y)
 
@@ -23,8 +24,7 @@ obj-y				:= entry.o traps.o irq.o idle.o time.o misc.o \
 					process.o signal.o ptrace.o align.o \
 					semaphore.o syscalls.o setup.o \
 					cputable.o ppc_htab.o
-obj-$(CONFIG_6xx)		+= l2cr.o ppc6xx_idle.o
-obj-$(CONFIG_ALL_PPC)		+= ppc6xx_idle.o
+obj-$(CONFIG_6xx)		+= l2cr.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
 obj-$(CONFIG_PCI)		+= pci.o 
 ifneq ($(CONFIG_PPC_ISERIES),y)

arch/ppc/kernel/cputable.c

@@ -18,18 +18,19 @@
 
 struct cpu_spec* cur_cpu_spec[NR_CPUS];
 
-extern void __setup_cpu_601(int cpu_nr);
-extern void __setup_cpu_603(int cpu_nr);
-extern void __setup_cpu_604(int cpu_nr);
-extern void __setup_cpu_750(int cpu_nr);
-extern void __setup_cpu_7400(int cpu_nr);
-extern void __setup_cpu_7410(int cpu_nr);
-extern void __setup_cpu_7450(int cpu_nr);
-extern void __setup_cpu_7450_23(int cpu_nr);
-extern void __setup_cpu_7455(int cpu_nr);
-extern void __setup_cpu_power3(int cpu_nr);
-extern void __setup_cpu_8xx(int cpu_nr);
-extern void __setup_cpu_generic(int cpu_nr);
+extern void __setup_cpu_601(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_603(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_604(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_750(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_750cx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_750fx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_7400(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_7410(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_7450(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_7455(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_power3(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_8xx(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+extern void __setup_cpu_generic(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
 
 #define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
 		     !defined(CONFIG_POWER3) && !defined(CONFIG_PPC_ISERIES))
@@ -136,7 +137,7 @@ struct cpu_spec	cpu_specs[] = {
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
 	32, 32,
-	__setup_cpu_750
+	__setup_cpu_750cx
     },
     {	/* 750CX (82201 and 82202) */
     	0xfffffff0, 0x00082200, "750CX",
@@ -144,7 +145,7 @@ struct cpu_spec	cpu_specs[] = {
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
 	32, 32,
-	__setup_cpu_750
+	__setup_cpu_750cx
     },
     {	/* 750CXe (82214) */
     	0xfffffff0, 0x00082210, "750CXe",
@@ -152,7 +153,7 @@ struct cpu_spec	cpu_specs[] = {
 	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
 	32, 32,
-	__setup_cpu_750
+	__setup_cpu_750cx
     },
     {	/* 750FX rev 2.0 must disable HID0[DPM] */
     	0xffffffff, 0x70000200, "750FX",
@@ -166,16 +167,17 @@ struct cpu_spec	cpu_specs[] = {
     {	/* 750FX (All revs except 2.0) */
     	0xffff0000, 0x70000000, "750FX",
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
-	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
+	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP |
+	CPU_FTR_DUAL_PLL_750FX,
 	COMMON_PPC,
 	32, 32,
-	__setup_cpu_750
+	__setup_cpu_750fx
     },
  
     {	/* 740/750 (L2CR bit need fixup for 740) */
     	0xffff0000, 0x00080000, "740/750",
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB |
-	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE,
+	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_CAN_NAP,
 	COMMON_PPC,
 	32, 32,
 	__setup_cpu_750
@@ -210,7 +212,7 @@ struct cpu_spec	cpu_specs[] = {
     {	/* 7450 2.0 - no doze/nap */
     	0xffffffff, 0x80000200, "7450",
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
-	CPU_FTR_L2CR | CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450,
 	COMMON_PPC | PPC_FEATURE_HAS_ALTIVEC,
 	32, 32,
@@ -220,7 +222,8 @@ struct cpu_spec	cpu_specs[] = {
     	0xffffffff, 0x80000201, "7450",
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450,
+	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
+	CPU_FTR_L3_DISABLE_NAP,
 	COMMON_PPC | PPC_FEATURE_HAS_ALTIVEC,
 	32, 32,
 	__setup_cpu_7450
@@ -229,16 +232,35 @@ struct cpu_spec	cpu_specs[] = {
     	0xffff0000, 0x80000000, "7450",
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR,
+	COMMON_PPC | PPC_FEATURE_HAS_ALTIVEC,
+	32, 32,
+	__setup_cpu_7450
+    },
+    {	/* 7455 rev 1.x */
+    	0xffffff00, 0x80010100, "7455",
+    	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB |
+	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
 	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450,
 	COMMON_PPC | PPC_FEATURE_HAS_ALTIVEC,
 	32, 32,
-	__setup_cpu_7450_23
+	__setup_cpu_7455
     },
-    {	/* 7455 */
+    {	/* 7455 rev 2.0 */
+    	0xffffffff, 0x80010200, "7455",
+    	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
+	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
+	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR |
+	CPU_FTR_L3_DISABLE_NAP,
+	COMMON_PPC | PPC_FEATURE_HAS_ALTIVEC,
+	32, 32,
+	__setup_cpu_7455
+    },
+    {	/* 7455 others */
     	0xffff0000, 0x80010000, "7455",
     	CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | CPU_FTR_CAN_NAP |
 	CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR |
-	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450,
+	CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR,
 	COMMON_PPC | PPC_FEATURE_HAS_ALTIVEC,
 	32, 32,
 	__setup_cpu_7455

arch/ppc/kernel/entry.S

@@ -67,7 +67,21 @@ transfer_to_handler:
 	addi	r11,r1,STACK_FRAME_OVERHEAD
 	stw	r11,PT_REGS(r12)
 	b	3f
-2:	/* if from kernel, check for stack overflow */
+2:	/* if from kernel, check interrupted DOZE/NAP mode and
+         * check for stack overflow
+         */
+#ifdef CONFIG_6xx
+	mfspr	r11,SPRN_HID0
+	mtcr	r11
+BEGIN_FTR_SECTION
+	bt-	8,power_save_6xx_restore	/* Check DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	bt-	9,power_save_6xx_restore	/* Check NAP */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#endif /* CONFIG_6xx */
+	.globl transfer_to_handler_cont
+transfer_to_handler_cont:
 	lwz	r11,THREAD_INFO-THREAD(r12)
 	cmplw	r1,r11			/* if r1 <= current->thread_info */
 	ble-	stack_ovf		/* then the kernel stack overflowed */

arch/ppc/kernel/head.S

@@ -168,6 +168,18 @@ __after_mmu_off:
 	bl	setup_disp_bat
 #endif
 
+/*
+ * Call setup_cpu for CPU 0 and initialize 6xx Idle
+ */
+	bl	reloc_offset
+	li	r24,0			/* cpu# */
+	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+	bl	reloc_offset
+	bl	init_idle_6xx
+#endif /* CONFIG_6xx */
+
+	
 #ifndef CONFIG_APUS
 /*
  * We need to run with _start at physical address 0.
@@ -344,6 +356,10 @@ i##n:								\
  */
 	. = 0x200
 MachineCheck:
+BEGIN_FTR_SECTION
+	dssall
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	mtspr	SPRG0,r10
 	mtspr	SPRG1,r11
 	mfcr	r10
@@ -1182,6 +1198,10 @@ __secondary_start:
 	mr	r4,r24
 	bl	identify_cpu
 	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
+#ifdef CONFIG_6xx
+	lis	r3,-KERNELBASE@h
+	bl	init_idle_6xx
+#endif /* CONFIG_6xx */
 
 	/* get current_thread_info and current */
 	lis	r1,secondary_ti@ha
@@ -1236,14 +1256,30 @@ _GLOBAL(__setup_cpu_750)
 	bl	setup_750_7400_hid0
 	mtlr	r4
 	blr
+_GLOBAL(__setup_cpu_750cx)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	bl	setup_750cx
+	mtlr	r4
+	blr
+_GLOBAL(__setup_cpu_750fx)
+	mflr	r4
+	bl	setup_common_caches
+	bl	setup_750_7400_hid0
+	bl	setup_750fx
+	mtlr	r4
+	blr
 _GLOBAL(__setup_cpu_7400)
 	mflr	r4
+	bl	setup_7400_workarounds
 	bl	setup_common_caches
 	bl	setup_750_7400_hid0
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_7410)
 	mflr	r4
+	bl	setup_7410_workarounds
 	bl	setup_common_caches
 	bl	setup_750_7400_hid0
 	li	r3,0
@@ -1253,19 +1289,13 @@ _GLOBAL(__setup_cpu_7410)
 _GLOBAL(__setup_cpu_7450)
 	mflr	r4
 	bl	setup_common_caches
-	bl	setup_7450_hid0
-	mtlr	r4
-	blr
-_GLOBAL(__setup_cpu_7450_23)
-	mflr	r4
-	bl	setup_common_caches
-	bl	setup_7450_23_hid0
+	bl	setup_745x_specifics
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_7455)
 	mflr	r4
 	bl	setup_common_caches
-	bl	setup_7455_hid0
+	bl	setup_745x_specifics
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_power3)
@@ -1308,6 +1338,47 @@ setup_604_hid0:
 	isync
 	blr
 
+/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
+ * erratas we work around here.
+ * Moto MPC710CE.pdf describes them, those are errata
+ * #3, #4 and #5
+ * Note that we assume the firmware didn't choose to
+ * apply other workarounds (there are other ones documented
+ * in the .pdf). It appear that Apple firmware only works
+ * around #3 and with the same fix we use. We may want to
+ * check if the CPU is using 60x bus mode in which case
+ * the workaround for errata #4 is useless. Also, we may
+ * want to explicitely clear HID0_NOPDST as this is not
+ * needed once we have applied workaround #5 (though it's
+ * not set by Apple's firmware at least).
+ */
+setup_7400_workarounds:
+	mfpvr	r3
+	rlwinm	r3,r3,0,20,31
+	cmpwi	0,r3,0x0207
+	ble	1f
+	blr
+setup_7410_workarounds:
+	mfpvr	r3
+	rlwinm	r3,r3,0,20,31
+	cmpwi	0,r3,0x0100
+	bnelr
+1:
+	mfspr	r11,SPRN_MSSSR0
+	/* Errata #3: Set L1OPQ_SIZE to 0x10 */
+	rlwinm	r11,r11,0,9,6
+	oris	r11,r11,0x0100
+	/* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
+	oris	r11,r11,0x0002
+	/* Errata #5: Set DRLT_SIZE to 0x01 */
+	rlwinm	r11,r11,0,5,2
+	oris	r11,r11,0x0800
+	sync
+	mtspr	SPRN_MSSSR0,r11
+	sync
+	isync
+	blr
+	
 /* 740/750/7400/7410
  * Enable Store Gathering (SGE), Address Brodcast (ABE),
  * Branch History Table (BHTE), Branch Target ICache (BTIC)
@@ -1330,7 +1401,31 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
 	isync
 	blr
 
-/* 7450
+/* 750cx specific
+ * Looks like we have to disable NAP feature for some PLL settings...
+ * (waiting for confirmation)
+ */
+setup_750cx:
+	mfspr	r10, SPRN_HID1
+	rlwinm	r10,r10,4,28,31
+	cmpi	cr0,r10,7
+	cmpi	cr1,r10,9
+	cmpi	cr2,r10,11
+	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
+	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
+	bnelr
+	lwz	r6,CPU_SPEC_FEATURES(r5)
+	li	r7,CPU_FTR_CAN_NAP
+	andc	r6,r6,r7
+	stw	r6,CPU_SPEC_FEATURES(r5)
+	blr
+
+/* 750fx specific
+ */
+setup_750fx:
+	blr
+
+/* MPC 745x
  * Enable Store Gathering (SGE), Branch Folding (FOLD)
  * Branch History Table (BHTE), Branch Target ICache (BTIC)
  * Dynamic Power Management (DPM), Speculative (SPD)
@@ -1338,8 +1433,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
  * Timebase has to be running or we wouldn't have made it here,
  * just ensure we don't disable it.
  * Clear Instruction cache throttling (ICTC)
+ * Enable L2 HW prefetch
  */
-setup_7450_hid0:
+setup_745x_specifics:
 	/* We check for the presence of an L3 cache setup by
 	 * the firmware. If any, we disable NAP capability as
 	 * it's known to be bogus on rev 2.1 and earlier
@@ -1347,23 +1443,24 @@ setup_7450_hid0:
 	mfspr	r11,SPRN_L3CR
 	andis.	r11,r11,L3CR_L3E@h
 	beq	1f
-	li	r7,CPU_FTR_CAN_NAP
 	lwz	r6,CPU_SPEC_FEATURES(r5)
+	andi.	r0,r6,CPU_FTR_L3_DISABLE_NAP
+	beq	1f
+	li	r7,CPU_FTR_CAN_NAP
 	andc	r6,r6,r7
 	stw	r6,CPU_SPEC_FEATURES(r5)
 1:	
-setup_7450_23_hid0:
 	mfspr	r11,HID0
 
 	/* All of the bits we have to set.....
-	*/
+	 */
 	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE | HID0_BTIC | HID0_LRSTK
 BEGIN_FTR_SECTION
 	oris	r11,r11,HID0_DPM@h	/* enable dynamic power mgmt */
 END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
 
 	/* All of the bits we have to clear....
-	*/
+	 */
 	li	r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
 	andc	r11,r11,r3		/* clear SPD: enable speculative */
  	li	r3,0
@@ -1373,34 +1470,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
 	mtspr	HID0,r11
 	sync
 	isync
-	blr
-
-/* 7455
- * Enable Store Gathering (SGE), Branch Folding (FOLD)
- * Branch History Table (BHTE), Branch Target ICache (BTIC)
- * Dynamic Power Management (DPM), Speculative (SPD)
- * Ensure our data cache instructions really operate.
- * Timebase has to be running or we wouldn't have made it here,
- * just ensure we don't disable it.
- * Clear Instruction cache throttling (ICTC)
- */
-setup_7455_hid0:
-	mfspr	r11,HID0
-
-	/* All of the bits we have to set.....
-	*/
-	ori	r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE | HID0_BTIC | HID0_LRSTK
-	oris	r11,r11,HID0_DPM@h	/* enable dynamic power mgmt */
 
-	/* All of the bits we have to clear....
-	*/
-	li	r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
-	andc	r11,r11,r3		/* clear SPD: enable speculative */
- 	li	r3,0
-
- 	mtspr	ICTC,r3			/* Instruction Cache Throttling off */
-	isync
-	mtspr	HID0,r11
+	/* Enable L2 HW prefetch
+	 */
+	mfspr	r3,SPRN_MSSCR0
+	ori	r3,r3,3
+	sync
+	mtspr	SPRN_MSSCR0,r3
 	sync
 	isync
 	blr
@@ -1446,11 +1522,6 @@ load_up_mmu:
  * This is where the main kernel code starts.
  */
 start_here:
-	/* Call setup_cpu for CPU 0 */
-	li	r3,0		/* data offset */
-	li	r24,0		/* cpu# */
-	bl	call_setup_cpu
-
 	/* ptr to current */
 	lis	r2,init_task@h
 	ori	r2,r2,init_task@l
@@ -1562,7 +1633,7 @@ BEGIN_FTR_SECTION
 	dssall
 	sync
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-3:
+3:	isync
 #ifdef CONFIG_PPC64BRIDGE
 	slbie	r4
 #endif /* CONFIG_PPC64BRIDGE */

arch/ppc/kernel/idle_6xx.S

+/*
+ *  This file contains the power_save function for 6xx & 7xxx CPUs
+ *  rewritten in assembler
+ *
+ *  Warning ! This code assumes that if your machine has a 750fx
+ *  it will have PLL 1 set to low speed mode (used during NAP/DOZE).
+ *  if this is not the case some additional changes will have to
+ *  be done to check a runtime var (a bit like powersave-nap)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/offsets.h>
+
+#undef DEBUG
+
+	.text
+
+/*
+ * Init idle, called at early CPU setup time from head.S for each CPU
+ * Make sure no rest of NAP mode remains in HID0, save default
+ * values for some CPU specific registers. Called with r24
+ * containing CPU number and r3 reloc offset
+ */
+ 	.globl	init_idle_6xx
+init_idle_6xx:
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,10,8	/* Clear NAP */
+	mtspr	SPRN_HID0, r4
+	b	1f
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	blr
+1:
+	slwi	r5,r24,2
+	add	r5,r5,r3
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_MSSCR0
+	addis	r6,r5, nap_save_msscr0@ha
+	stw	r4,nap_save_msscr0@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	mfspr	r4,SPRN_HID1
+	addis	r6,r5,nap_save_hid1@ha
+	stw	r4,nap_save_hid1@l(r6)
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	blr
+
+/*
+ * Here is the power_save_6xx function. This could eventually be
+ * split into several functions & changing the function pointer
+ * depending on the various features.
+ */
+	.globl	ppc6xx_idle
+ppc6xx_idle:
+	/* Check if we can nap or doze, put HID0 mask in r3
+	 */
+	lis	r3, 0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+BEGIN_FTR_SECTION
+	/* We must dynamically check for the NAP feature as it
+	 * can be cleared by CPU init after the fixups are done
+	 */
+	lis	r4,cur_cpu_spec@ha
+	lwz	r4,cur_cpu_spec@l(r4)
+	lwz	r4,CPU_SPEC_FEATURES(r4)
+	andi.	r0,r4,CPU_FTR_CAN_NAP
+	beq	1f
+	/* Now check if user or arch enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpi	0,r4,0
+	beq	1f
+	lis	r3,HID0_NAP@h
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+	cmpi	0,r3,0
+	beqlr
+
+	/* Clear MSR:EE */
+	mfmsr	r7
+	rlwinm	r0,r7,0,17,15
+	mtmsr	r0
+
+	/* Check current_thread_info()->flags */
+	rlwinm	r4,r1,0,0,18
+	lwz	r4,TI_FLAGS(r4)
+	andi.	r0,r4,_TIF_NEED_RESCHED
+	beq	1f
+	mtmsr	r7	/* out of line this ? */
+	blr
+1:	
+	/* Some pre-nap cleanups needed on some CPUs */
+	andis.	r0,r3,HID0_NAP@h
+	beq	2f
+BEGIN_FTR_SECTION
+	/* Disable L2 prefetch on some 745x and try to ensure
+	 * L2 prefetch engines are idle. As explained by errata
+	 * text, we can't be sure they are, we just hope very hard
+	 * that well be enough (sic !). At least I noticed Apple
+	 * doesn't even bother doing the dcbf's here...
+	 */
+	mfspr	r4,SPRN_MSSCR0
+	rlwinm	r4,r4,0,0,29
+	sync
+	mtspr	SPRN_MSSCR0,r4
+	sync
+	isync
+	lis	r4,KERNELBASE@h
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+	dcbf	0,r4
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+#ifdef DEBUG
+	lis	r6,nap_enter_count@ha
+	lwz	r4,nap_enter_count@l(r6)
+	addi	r4,r4,1
+	stw	r4,nap_enter_count@l(r6)
+#endif	
+2:
+BEGIN_FTR_SECTION
+	/* Go to low speed mode on some 750FX */
+	lis	r4,powersave_lowspeed@ha
+	lwz	r4,powersave_lowspeed@l(r4)
+	cmpi	0,r4,0
+	beq	1f
+	mfspr	r4,SPRN_HID1
+	oris	r4,r4,0x0001
+	mtspr	SPRN_HID1,r4
+1:	
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+
+	/* Go to NAP or DOZE now */	
+	mfspr	r4,SPRN_HID0
+	lis	r5,(HID0_NAP|HID0_SLEEP)@h
+BEGIN_FTR_SECTION
+	oris	r5,r5,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	andc	r4,r4,r5
+	or	r4,r4,r3
+BEGIN_FTR_SECTION
+	oris	r4,r4,HID0_DPM@h	/* that should be done once for all  */
+END_FTR_SECTION_IFCLR(CPU_FTR_NO_DPM)
+	mtspr	SPRN_HID0,r4
+BEGIN_FTR_SECTION
+	DSSALL
+	sync
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+	ori	r7,r7,MSR_EE /* Could be ommited (already set) */
+	oris	r7,r7,MSR_POW@h
+	sync
+	isync
+	mtmsr	r7
+	isync
+	sync
+	blr
+	
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * we are called with DR/IR still off and r2 containing physical
+ * address of current.
+ */
+ 	.globl power_save_6xx_restore
+power_save_6xx_restore:
+	mfspr	r11,SPRN_HID0
+	rlwinm.	r11,r11,0,10,8	/* Clear NAP & copy NAP bit !state to cr1 EQ */
+	cror	4*cr1+eq,4*cr0+eq,4*cr0+eq
+BEGIN_FTR_SECTION
+	rlwinm	r11,r11,0,9,7	/* Clear DOZE */
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+	mtspr	SPRN_HID0, r11
+
+#ifdef DEBUG
+	beq	cr1,1f
+	lis	r11,(nap_return_count-KERNELBASE)@ha
+	lwz	r9,nap_return_count@l(r11)
+	addi	r9,r9,1
+	stw	r9,nap_return_count@l(r11)
+1:
+#endif
+	
+	rlwinm	r9,r1,0,0,18
+	tophys(r9,r9)
+	lwz	r11,TI_CPU(r9)
+	slwi	r11,r11,2
+	/* Todo make sure all these are in the same page
+	 * and load r22 (@ha part + CPU offset) only once
+	 */
+BEGIN_FTR_SECTION
+	beq	cr1,1f
+	addis	r9,r11,(nap_save_msscr0-KERNELBASE)@ha
+	lwz	r9,nap_save_msscr0@l(r9)
+	mtspr	SPRN_MSSCR0, r9
+	sync
+	isync
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_NAP_DISABLE_L2_PR)
+BEGIN_FTR_SECTION
+	addis	r9,r11,(nap_save_hid1-KERNELBASE)@ha
+	lwz	r9,nap_save_hid1@l(r9)
+	mtspr	SPRN_HID1, r9
+END_FTR_SECTION_IFSET(CPU_FTR_DUAL_PLL_750FX)
+	b	transfer_to_handler_cont
+
+	.data
+
+	.globl nap_save_msscr0
+nap_save_msscr0:
+	.space	4*NR_CPUS
+
+	.globl nap_save_hid1
+nap_save_hid1:
+	.space	4*NR_CPUS
+
+	.globl powersave_nap
+powersave_nap:
+	.long	0
+	.globl powersave_lowspeed
+powersave_lowspeed:
+	.long	0
+
+#ifdef DEBUG
+	.globl nap_enter_count
+nap_enter_count:
+	.space	4
+	.globl nap_return_count
+nap_return_count:
+	.space	4
+#endif

arch/ppc/kernel/misc.S

@@ -188,8 +188,10 @@ _GLOBAL(do_cpu_ftr_fixups)
  * call_setup_cpu - call the setup_cpu function for this cpu
  * r3 = data offset, r24 = cpu number
  *
- * Don't change register layout, the setup function may rely
- * on r5 containing a relocated pointer to the current cpu spec.
+ * Setup function is called with:
+ *   r3 = data offset
+ *   r4 = CPU number
+ *   r5 = ptr to CPU spec (relocated)
  */
 _GLOBAL(call_setup_cpu)
 	addis	r5,r3,cur_cpu_spec@ha
@@ -200,7 +202,7 @@ _GLOBAL(call_setup_cpu)
 	lwz	r6,CPU_SPEC_SETUP(r5)
 	add	r6,r6,r3
 	mtctr	r6
-	mr	r3,r24
+	mr	r4,r24
 	bctr
 
 #ifndef CONFIG_PPC_ISERIES	/* iSeries version is in iSeries_misc.S */

arch/ppc/kernel/ppc6xx_idle.c

-/*
- * BK Id: %F% %I% %G% %U% %#%
- */
-/*
- * power_save() rountine for classic PPC CPUs.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/stringify.h>
-
-#include <asm/cputable.h>
-#include <asm/current.h>
-#include <asm/processor.h>
-
-unsigned long powersave_nap = 0;
-
-#define DSSALL		.long	(0x1f<<26)+(0x10<<21)+(0x336<<1)
-
-void
-ppc6xx_idle(void)
-{
-	unsigned long hid0;
-	int nap = powersave_nap;
-
-	/* 7450 has no DOZE mode mode, we return if powersave_nap
-	 * isn't enabled
-	 */
-	if (!(nap || (cur_cpu_spec[smp_processor_id()]->cpu_features
-		      & CPU_FTR_CAN_DOZE)))
-		return;
-	/*
-	 * Disable interrupts to prevent a lost wakeup
-	 * when going to sleep.  This is necessary even with
-	 * RTLinux since we are not guaranteed an interrupt
-	 * didn't come in and is waiting for a __sti() before
-	 * emulating one.  This way, we really do hard disable.
-	 *
-	 * We assume that we're sti-ed when we come in here.  We
-	 * are in the idle loop so if we're cli-ed then it's a bug
-	 * anyway.
-	 *  -- Cort
-	 */
-	_nmask_and_or_msr(MSR_EE, 0);
-	if (!need_resched()) {
-		__asm__ __volatile__("mfspr %0,1008":"=r"(hid0):);
-		hid0 &= ~(HID0_NAP | HID0_SLEEP | HID0_DOZE);
-		hid0 |= (powersave_nap ? HID0_NAP : HID0_DOZE);
-		if (!(cur_cpu_spec[smp_processor_id()]->cpu_features
-		      & CPU_FTR_NO_DPM))
-			hid0 |= HID0_DPM;
-		__asm__ __volatile__("mtspr 1008,%0"::"r"(hid0));
-		/* Flush pending data streams, consider this instruction
-		 * exist on all altivec capable CPUs
-		 */
-		__asm__ __volatile__("98:	" __stringify(DSSALL) "\n"
-				     "	sync\n"
-				     "99:\n"
-				     ".section __ftr_fixup,\"a\"\n"
-				     "	.long %0\n"
-				     "	.long %1\n"
-				     "	.long 98b\n"
-				     "	.long 99b\n"
-				     ".previous"::"i"
-				     (CPU_FTR_ALTIVEC), "i"(CPU_FTR_ALTIVEC));
-
-		/* set the POW bit in the MSR, and enable interrupts
-		 * so we wake up sometime! */
-		_nmask_and_or_msr(0, MSR_POW | MSR_EE);
-	}
-	_nmask_and_or_msr(0, MSR_EE);
-}

include/asm-ppc/cputable.h

@@ -29,6 +29,10 @@
 /* This structure can grow, it's real size is used by head.S code
  * via the mkdefs mecanism.
  */
+struct cpu_spec;
+
+typedef	void (*cpu_setup_t)(unsigned long offset, int cpu_nr, struct cpu_spec* spec);
+
 struct cpu_spec {
 	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
 	unsigned int	pvr_mask;
@@ -45,7 +49,7 @@ struct cpu_spec {
 	/* this is called to initialize various CPU bits like L1 cache,
 	 * BHT, SPD, etc... from head.S before branching to identify_machine
 	 */
-	void		(*cpu_setup)(int cpu_nr);
+	cpu_setup_t	cpu_setup;
 };
 
 extern struct cpu_spec		cpu_specs[];
@@ -66,6 +70,9 @@ extern struct cpu_spec		*cur_cpu_spec[];
 #define CPU_FTR_HPTE_TABLE		0x00000200
 #define CPU_FTR_CAN_NAP			0x00000400
 #define CPU_FTR_L3CR			0x00000800
+#define CPU_FTR_L3_DISABLE_NAP		0x00001000
+#define CPU_FTR_NAP_DISABLE_L2_PR	0x00002000
+#define CPU_FTR_DUAL_PLL_750FX		0x00004000
 #define CPU_FTR_NO_DPM			0x00008000
 
 #ifdef __ASSEMBLY__