Commit 8942b2d5 authored by Furquan Shaikh's avatar Furquan Shaikh Committed by Greg Kroah-Hartman

gsmi: Add GSMI commands to log S0ix info

Add new GSMI commands (GSMI_CMD_LOG_S0IX_SUSPEND = 0xa,
GSMI_CMD_LOG_S0IX_RESUME = 0xb) that allow firmware to log any
information during S0ix suspend/resume paths.

Traditional ACPI suspend S3 involves BIOS both during the suspend and
the resume paths. However, modern suspend type like S0ix does not
involve firmware on either of the paths. This command gives the
firmware an opportunity to log any required information about the
suspend and resume operations e.g. wake sources.

Additionally, this change adds a module parameter to allow platforms
to specifically enable S0ix logging if required. This prevents any
other platforms from unnecessarily making a GSMI call which could have
any side-effects.

Tested by verifying that wake sources are correctly logged in eventlog.
Signed-off-by: default avatarFurquan Shaikh <furquan@chromium.org>
Reviewed-by: default avatarAaron Durbin <adurbin@chromium.org>
Reviewed-by: default avatarRajat Jain <rajatja@chromium.org>
Signed-off-by: default avatarFurquan Shaikh <furquan@google.com>
Tested-by: default avatarFurquan Shaikh <furquan@chromium.org>
Reviewed-by: default avatarAaron Durbin <adurbin@chromium.org>
[zwisler: update changelog for upstream]
Signed-off-by: default avatarRoss Zwisler <zwisler@google.com>
Reviewed-by: default avatarGuenter Roeck <groeck@chromium.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d31655ba
......@@ -29,6 +29,7 @@
#include <linux/efi.h>
#include <linux/module.h>
#include <linux/ucs2_string.h>
#include <linux/suspend.h>
#define GSMI_SHUTDOWN_CLEAN 0 /* Clean Shutdown */
/* TODO(mikew@google.com): Tie in HARDLOCKUP_DETECTOR with NMIWDT */
......@@ -70,6 +71,8 @@
#define GSMI_CMD_SET_NVRAM_VAR 0x03
#define GSMI_CMD_SET_EVENT_LOG 0x08
#define GSMI_CMD_CLEAR_EVENT_LOG 0x09
#define GSMI_CMD_LOG_S0IX_SUSPEND 0x0a
#define GSMI_CMD_LOG_S0IX_RESUME 0x0b
#define GSMI_CMD_CLEAR_CONFIG 0x20
#define GSMI_CMD_HANDSHAKE_TYPE 0xC1
......@@ -122,7 +125,6 @@ struct gsmi_log_entry_type_1 {
u32 instance;
} __packed;
/*
* Some platforms don't have explicit SMI handshake
* and need to wait for SMI to complete.
......@@ -133,6 +135,15 @@ module_param(spincount, uint, 0600);
MODULE_PARM_DESC(spincount,
"The number of loop iterations to use when using the spin handshake.");
/*
* Platforms might not support S0ix logging in their GSMI handlers. In order to
* avoid any side-effects of generating an SMI for S0ix logging, use the S0ix
* related GSMI commands only for those platforms that explicitly enable this
* option.
*/
static bool s0ix_logging_enable;
module_param(s0ix_logging_enable, bool, 0600);
static struct gsmi_buf *gsmi_buf_alloc(void)
{
struct gsmi_buf *smibuf;
......@@ -781,6 +792,78 @@ static const struct platform_device_info gsmi_dev_info = {
.dma_mask = DMA_BIT_MASK(32),
};
#ifdef CONFIG_PM
static void gsmi_log_s0ix_info(u8 cmd)
{
unsigned long flags;
/*
* If platform has not enabled S0ix logging, then no action is
* necessary.
*/
if (!s0ix_logging_enable)
return;
spin_lock_irqsave(&gsmi_dev.lock, flags);
memset(gsmi_dev.param_buf->start, 0, gsmi_dev.param_buf->length);
gsmi_exec(GSMI_CALLBACK, cmd);
spin_unlock_irqrestore(&gsmi_dev.lock, flags);
}
static int gsmi_log_s0ix_suspend(struct device *dev)
{
/*
* If system is not suspending via firmware using the standard ACPI Sx
* types, then make a GSMI call to log the suspend info.
*/
if (!pm_suspend_via_firmware())
gsmi_log_s0ix_info(GSMI_CMD_LOG_S0IX_SUSPEND);
/*
* Always return success, since we do not want suspend
* to fail just because of logging failure.
*/
return 0;
}
static int gsmi_log_s0ix_resume(struct device *dev)
{
/*
* If system did not resume via firmware, then make a GSMI call to log
* the resume info and wake source.
*/
if (!pm_resume_via_firmware())
gsmi_log_s0ix_info(GSMI_CMD_LOG_S0IX_RESUME);
/*
* Always return success, since we do not want resume
* to fail just because of logging failure.
*/
return 0;
}
static const struct dev_pm_ops gsmi_pm_ops = {
.suspend_noirq = gsmi_log_s0ix_suspend,
.resume_noirq = gsmi_log_s0ix_resume,
};
static int gsmi_platform_driver_probe(struct platform_device *dev)
{
return 0;
}
static struct platform_driver gsmi_driver_info = {
.driver = {
.name = "gsmi",
.pm = &gsmi_pm_ops,
},
.probe = gsmi_platform_driver_probe,
};
#endif
static __init int gsmi_init(void)
{
unsigned long flags;
......@@ -792,6 +875,14 @@ static __init int gsmi_init(void)
gsmi_dev.smi_cmd = acpi_gbl_FADT.smi_command;
#ifdef CONFIG_PM
ret = platform_driver_register(&gsmi_driver_info);
if (unlikely(ret)) {
printk(KERN_ERR "gsmi: unable to register platform driver\n");
return ret;
}
#endif
/* register device */
gsmi_dev.pdev = platform_device_register_full(&gsmi_dev_info);
if (IS_ERR(gsmi_dev.pdev)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment