Commit 898b2970 authored by Stas Sergeev's avatar Stas Sergeev Committed by David S. Miller

mvneta: implement SGMII-based in-band link state signaling

When MDIO bus is unavailable (common setup for SGMII), the in-band
signaling must be used to correctly track link state.
This patch enables the in-band status delivery for link state changes, namely:
- link up/down
- link speed
- duplex full/half
fixed_phy_update_state() is used to update phy status.

CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
CC: netdev@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: default avatarStas Sergeev <stsp@users.sourceforge.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a3bebdce
......@@ -100,6 +100,8 @@
#define MVNETA_TXQ_CMD 0x2448
#define MVNETA_TXQ_DISABLE_SHIFT 8
#define MVNETA_TXQ_ENABLE_MASK 0x000000ff
#define MVNETA_GMAC_CLOCK_DIVIDER 0x24f4
#define MVNETA_GMAC_1MS_CLOCK_ENABLE BIT(31)
#define MVNETA_ACC_MODE 0x2500
#define MVNETA_CPU_MAP(cpu) (0x2540 + ((cpu) << 2))
#define MVNETA_CPU_RXQ_ACCESS_ALL_MASK 0x000000ff
......@@ -122,6 +124,7 @@
#define MVNETA_TX_INTR_MASK_ALL (0xff << 0)
#define MVNETA_RX_INTR_MASK(nr_rxqs) (((1 << nr_rxqs) - 1) << 8)
#define MVNETA_RX_INTR_MASK_ALL (0xff << 8)
#define MVNETA_MISCINTR_INTR_MASK BIT(31)
#define MVNETA_INTR_OLD_CAUSE 0x25a8
#define MVNETA_INTR_OLD_MASK 0x25ac
......@@ -165,6 +168,7 @@
#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
#define MVNETA_GMAC_CTRL_2 0x2c08
#define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
#define MVNETA_GMAC2_PORT_RGMII BIT(4)
#define MVNETA_GMAC2_PORT_RESET BIT(6)
......@@ -180,9 +184,11 @@
#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
#define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2)
#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
#define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
#define MVNETA_MIB_COUNTERS_BASE 0x3080
......@@ -304,6 +310,7 @@ struct mvneta_port {
unsigned int link;
unsigned int duplex;
unsigned int speed;
int use_inband_status:1;
};
/* The mvneta_tx_desc and mvneta_rx_desc structures describe the
......@@ -994,6 +1001,20 @@ static void mvneta_defaults_set(struct mvneta_port *pp)
val &= ~MVNETA_PHY_POLLING_ENABLE;
mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
if (pp->use_inband_status) {
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
MVNETA_GMAC_FORCE_LINK_DOWN |
MVNETA_GMAC_AN_FLOW_CTRL_EN);
val |= MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_AN_DUPLEX_EN;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
}
mvneta_set_ucast_table(pp, -1);
mvneta_set_special_mcast_table(pp, -1);
mvneta_set_other_mcast_table(pp, -1);
......@@ -2043,6 +2064,28 @@ static irqreturn_t mvneta_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
static int mvneta_fixed_link_update(struct mvneta_port *pp,
struct phy_device *phy)
{
struct fixed_phy_status status;
struct fixed_phy_status changed = {};
u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
status.link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
if (gmac_stat & MVNETA_GMAC_SPEED_1000)
status.speed = SPEED_1000;
else if (gmac_stat & MVNETA_GMAC_SPEED_100)
status.speed = SPEED_100;
else
status.speed = SPEED_10;
status.duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
changed.link = 1;
changed.speed = 1;
changed.duplex = 1;
fixed_phy_update_state(phy, &status, &changed);
return 0;
}
/* NAPI handler
* Bits 0 - 7 of the causeRxTx register indicate that are transmitted
* packets on the corresponding TXQ (Bit 0 is for TX queue 1).
......@@ -2063,8 +2106,18 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
}
/* Read cause register */
cause_rx_tx = mvreg_read(pp, MVNETA_INTR_NEW_CAUSE) &
(MVNETA_RX_INTR_MASK(rxq_number) | MVNETA_TX_INTR_MASK(txq_number));
cause_rx_tx = mvreg_read(pp, MVNETA_INTR_NEW_CAUSE);
if (cause_rx_tx & MVNETA_MISCINTR_INTR_MASK) {
u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
if (pp->use_inband_status && (cause_misc &
(MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE))) {
mvneta_fixed_link_update(pp, pp->phy_dev);
}
}
/* Release Tx descriptors */
if (cause_rx_tx & MVNETA_TX_INTR_MASK_ALL) {
......@@ -2109,7 +2162,9 @@ static int mvneta_poll(struct napi_struct *napi, int budget)
napi_complete(napi);
local_irq_save(flags);
mvreg_write(pp, MVNETA_INTR_NEW_MASK,
MVNETA_RX_INTR_MASK(rxq_number) | MVNETA_TX_INTR_MASK(txq_number));
MVNETA_RX_INTR_MASK(rxq_number) |
MVNETA_TX_INTR_MASK(txq_number) |
MVNETA_MISCINTR_INTR_MASK);
local_irq_restore(flags);
}
......@@ -2373,7 +2428,13 @@ static void mvneta_start_dev(struct mvneta_port *pp)
/* Unmask interrupts */
mvreg_write(pp, MVNETA_INTR_NEW_MASK,
MVNETA_RX_INTR_MASK(rxq_number) | MVNETA_TX_INTR_MASK(txq_number));
MVNETA_RX_INTR_MASK(rxq_number) |
MVNETA_TX_INTR_MASK(txq_number) |
MVNETA_MISCINTR_INTR_MASK);
mvreg_write(pp, MVNETA_INTR_MISC_MASK,
MVNETA_CAUSE_PHY_STATUS_CHANGE |
MVNETA_CAUSE_LINK_CHANGE |
MVNETA_CAUSE_PSC_SYNC_CHANGE);
phy_start(pp->phy_dev);
netif_tx_start_all_queues(pp->dev);
......@@ -2523,9 +2584,7 @@ static void mvneta_adjust_link(struct net_device *ndev)
val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
MVNETA_GMAC_CONFIG_FULL_DUPLEX |
MVNETA_GMAC_AN_SPEED_EN |
MVNETA_GMAC_AN_DUPLEX_EN);
MVNETA_GMAC_CONFIG_FULL_DUPLEX);
if (phydev->duplex)
val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
......@@ -2554,12 +2613,24 @@ static void mvneta_adjust_link(struct net_device *ndev)
if (status_change) {
if (phydev->link) {
u32 val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
val |= (MVNETA_GMAC_FORCE_LINK_PASS |
MVNETA_GMAC_FORCE_LINK_DOWN);
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
if (!pp->use_inband_status) {
u32 val = mvreg_read(pp,
MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
val |= MVNETA_GMAC_FORCE_LINK_PASS;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
val);
}
mvneta_port_up(pp);
} else {
if (!pp->use_inband_status) {
u32 val = mvreg_read(pp,
MVNETA_GMAC_AUTONEG_CONFIG);
val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
val |= MVNETA_GMAC_FORCE_LINK_DOWN;
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
val);
}
mvneta_port_down(pp);
}
phy_print_status(phydev);
......@@ -2910,6 +2981,9 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
return -EINVAL;
}
if (pp->use_inband_status)
ctrl |= MVNETA_GMAC2_INBAND_AN_ENABLE;
/* Cancel Port Reset */
ctrl &= ~MVNETA_GMAC2_PORT_RESET;
mvreg_write(pp, MVNETA_GMAC_CTRL_2, ctrl);
......@@ -2934,6 +3008,7 @@ static int mvneta_probe(struct platform_device *pdev)
char hw_mac_addr[ETH_ALEN];
const char *mac_from;
int phy_mode;
int fixed_phy = 0;
int err;
/* Our multiqueue support is not complete, so for now, only
......@@ -2967,6 +3042,7 @@ static int mvneta_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "cannot register fixed PHY\n");
goto err_free_irq;
}
fixed_phy = 1;
/* In the case of a fixed PHY, the DT node associated
* to the PHY is the Ethernet MAC DT node.
......@@ -2990,6 +3066,8 @@ static int mvneta_probe(struct platform_device *pdev)
pp = netdev_priv(dev);
pp->phy_node = phy_node;
pp->phy_interface = phy_mode;
pp->use_inband_status = (phy_mode == PHY_INTERFACE_MODE_SGMII) &&
fixed_phy;
pp->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(pp->clk)) {
......@@ -3067,6 +3145,12 @@ static int mvneta_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pp->dev);
if (pp->use_inband_status) {
struct phy_device *phy = of_phy_find_device(dn);
mvneta_fixed_link_update(pp, phy);
}
return 0;
err_free_stats:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment