scsi: hisi_sas: Ensure all enabled PHYs up during controller reset

For the controller reset operation, hisi_sas_phy_enable() is executed for
each enabled local PHY, and refresh the port id of each device based on the
latest hisi_sas_phy->port_id after 1 second sleep, hisi_sas_phy->port_id is
configured in the interrupt processing function phy_up_v3_hw(). However, in
directly attached scenario, for some SATA disks the amount of time for
phyup more than 1s sometimes. In this case, incorrect port id may be
configured in hisi_sas_refresh_port_id().  As a result, all the internal
IOs fail and disk lost, such as follows:

[10717.666565] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=10(sata)
[10718.826813] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=63
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc8003f 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.843428] sas: TMF task open reject failed  5000000000000501
[10718.849242] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=64
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80040 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.865856] sas: TMF task open reject failed  5000000000000501
[10718.871670] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=65
task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80041 0x0
0x0 Error info: 0x0 0x0 0x0 0x0
[10718.888284] sas: TMF task open reject failed  5000000000000501
[10718.894093] sas: executing TMF for 5000000000000501 failed after 3 attempts!
[10718.901114] hisi_sas_v3_hw 0000:74:02.0: ata disk 5000000000000501 reset failed
[10718.908410] hisi_sas_v3_hw 0000:74:02.0: controller reset complete
.....
[10773.298633] ata216.00: revalidation failed (errno=-19)
[10773.303753] ata216.00: disable device

So the time of waitting for PHYs up is 1s which may be not enough. To solve
the issue, running hisi_sas_phy_enable() in parallel through async
operations and use wait_for_completion_timeout() to wait for PHYs come up
instead of directly sleep for 1 second.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1679283265-115066-4-git-send-email-chenxiang66@hisilicon.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -1520,13 +1520,41 @@ void hisi_sas_controller_reset_prepare(struct hisi_hba *hisi_hba)
 }
 EXPORT_SYMBOL_GPL(hisi_sas_controller_reset_prepare);
 
+static void hisi_sas_async_init_wait_phyup(void *data, async_cookie_t cookie)
+{
+	struct hisi_sas_phy *phy = data;
+	struct hisi_hba *hisi_hba = phy->hisi_hba;
+	struct device *dev = hisi_hba->dev;
+	DECLARE_COMPLETION_ONSTACK(completion);
+	int phy_no = phy->sas_phy.id;
+
+	phy->reset_completion = &completion;
+	hisi_sas_phy_enable(hisi_hba, phy_no, 1);
+	if (!wait_for_completion_timeout(&completion,
+					 HISI_SAS_WAIT_PHYUP_TIMEOUT))
+		dev_warn(dev, "phy%d wait phyup timed out\n", phy_no);
+
+	phy->reset_completion = NULL;
+}
+
 void hisi_sas_controller_reset_done(struct hisi_hba *hisi_hba)
 {
 	struct Scsi_Host *shost = hisi_hba->shost;
+	ASYNC_DOMAIN_EXCLUSIVE(async);
+	int phy_no;
 
 	/* Init and wait for PHYs to come up and all libsas event finished. */
-	hisi_hba->hw->phys_init(hisi_hba);
-	msleep(1000);
+	for (phy_no = 0; phy_no < hisi_hba->n_phy; phy_no++) {
+		struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+
+		if (!(hisi_hba->phy_state & BIT(phy_no)))
+			continue;
+
+		async_schedule_domain(hisi_sas_async_init_wait_phyup,
+				      phy, &async);
+	}
+
+	async_synchronize_full_domain(&async);
 	hisi_sas_refresh_port_id(hisi_hba);
 	clear_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags);