Commit 89a6139c authored by Paul Cercueil's avatar Paul Cercueil Committed by Linus Walleij

MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers

We set the pin configuration for the jz4780-nand and jz4780-uart
drivers.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 636f8ba6
......@@ -29,18 +29,30 @@ &ext {
&uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_uart0>;
};
&uart1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_uart1>;
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_uart2>;
};
&uart4 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pins_uart4>;
};
&nemc {
......@@ -61,6 +73,13 @@ nandc: nand-controller@1 {
ingenic,nemc-tAW = <15>;
ingenic,nemc-tSTRV = <100>;
/*
* Only CLE/ALE are needed for the devices that are connected, rather
* than the full address line set.
*/
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc>;
nand@1 {
reg = <1>;
......@@ -69,6 +88,9 @@ nand@1 {
nand-ecc-mode = "hw";
nand-on-flash-bbt;
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc_cs1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <2>;
......@@ -106,3 +128,41 @@ partition@0x8c00000 {
&bch {
status = "okay";
};
&pinctrl {
pins_uart0: uart0 {
function = "uart0";
groups = "uart0-data";
bias-disable;
};
pins_uart1: uart1 {
function = "uart1";
groups = "uart1-data";
bias-disable;
};
pins_uart2: uart2 {
function = "uart2";
groups = "uart2-data", "uart2-hwflow";
bias-disable;
};
pins_uart4: uart4 {
function = "uart4";
groups = "uart4-data";
bias-disable;
};
pins_nemc: nemc {
function = "nemc";
groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
bias-disable;
};
pins_nemc_cs1: nemc-cs1 {
function = "nemc-cs1";
groups = "nemc-cs1";
bias-disable;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment