Commit 89c9fea3 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  tty: fix comment for __tty_alloc_driver()
  init/main: properly align the multi-line comment
  init/main: Fix double "the" in comment
  Fix dead URLs to ftp.kernel.org
  drivers: Clean up duplicated email address
  treewide: Fix typo in xml/driver-api/basics.xml
  tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall"
  selftests/timers: Spelling s/privledges/privileges/
  HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/
  net: phy: dp83848: Fix Typo
  UBI: Fix typos
  Documentation: ftrace.txt: Correct nice value of 120 priority
  net: fec: Fix typo in error msg and comment
  treewide: Fix typos in printk
parents 76f1948a 6fbc8798
......@@ -1546,7 +1546,7 @@ Note, that the trace data shows the internal priority (99 - rtprio).
<idle>-0 3d..3 5us : 0:120:R ==> [003] 2389: 94:R sleep
The 0:120:R means idle was running with a nice priority of 0 (120 - 20)
The 0:120:R means idle was running with a nice priority of 0 (120 - 120)
and in the running state 'R'. The sleep task was scheduled in with
2389: 94:R. That is the priority is the kernel rtprio (99 - 5 = 94)
and it too is in the running state.
......
......@@ -10143,7 +10143,7 @@ W: http://sourceforge.net/projects/accel-pptp
PREEMPTIBLE KERNEL
M: Robert Love <rml@tech9.net>
L: kpreempt-tech@lists.sourceforge.net
W: ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
W: https://www.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
S: Supported
F: Documentation/preempt-locking.txt
F: include/linux/preempt.h
......
......@@ -219,7 +219,7 @@ config BLK_DEV_LOOP
To use the loop device, you need the losetup utility, found in the
util-linux package, see
<ftp://ftp.kernel.org/pub/linux/utils/util-linux/>.
<https://www.kernel.org/pub/linux/utils/util-linux/>.
The loop device driver can also be used to "hide" a file system in
a disk partition, floppy, or regular file, either using encryption
......
......@@ -89,7 +89,7 @@ static int sti_compositor_bind(struct device *dev,
/* Nothing to do, wait for the second round */
break;
default:
DRM_ERROR("Unknow subdev compoment type\n");
DRM_ERROR("Unknown subdev component type\n");
return 1;
}
}
......
......@@ -736,7 +736,7 @@ void picolcd_debug_raw_event(struct picolcd_data *data,
}
break;
case REPORT_MEMORY:
/* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */
/* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRITE_MEMORY */
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_MEMORY", report->id, size-1);
hid_debug_event(hdev, buff);
......
......@@ -12,7 +12,7 @@
* 1999-08-02 (jmt) - Initial rewrite for Unified ADB.
* 2000-03-29 Tony Mantler <tonym@mac.linux-m68k.org>
* - Big overhaul, should actually work now.
* 2006-12-31 Finn Thain <fthain@telegraphics.com.au> - Another overhaul.
* 2006-12-31 Finn Thain - Another overhaul.
*
* Suggested reading:
* Inside Macintosh, ch. 5 ADB Manager
......
......@@ -115,7 +115,7 @@ config MD_RAID10
RAID-10 requires mdadm-1.7.0 or later, available at:
ftp://ftp.kernel.org/pub/linux/utils/raid/mdadm/
https://www.kernel.org/pub/linux/utils/raid/mdadm/
If unsure, say Y.
......
......@@ -404,6 +404,6 @@ struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
}
EXPORT_SYMBOL(horus3a_attach);
MODULE_DESCRIPTION("Sony HORUS3A sattelite tuner driver");
MODULE_DESCRIPTION("Sony HORUS3A satellite tuner driver");
MODULE_AUTHOR("Sergey Kozlov <serjk@netup.ru>");
MODULE_LICENSE("GPL");
......@@ -589,7 +589,7 @@ int vpu_load_firmware(struct platform_device *pdev)
);
if (ret == 0) {
ret = -ETIME;
dev_err(dev, "wait vpu initialization timout!\n");
dev_err(dev, "wait vpu initialization timeout!\n");
goto OUT_LOAD_FW;
} else if (-ERESTARTSYS == ret) {
dev_err(dev, "wait vpu interrupted by a signal!\n");
......
......@@ -343,7 +343,7 @@ static int transfer_image(struct cxl *adapter, int operation,
return rc;
}
if (rc == 0) {
pr_devel("remove curent afu\n");
pr_devel("remove current afu\n");
for (afu = 0; afu < adapter->slices; afu++)
cxl_guest_remove_afu(adapter->afu[afu]);
......
......@@ -2,7 +2,7 @@ menuconfig MTD_UBI
tristate "Enable UBI - Unsorted block images"
select CRC32
help
UBI is a software layer above MTD layer which admits of LVM-like
UBI is a software layer above MTD layer which admits use of LVM-like
logical volumes on top of MTD devices, hides some complexities of
flash chips like wear and bad blocks and provides some other useful
capabilities. Please, consult the MTD web site for more details
......
......@@ -45,7 +45,7 @@
* About minimal I/O units. In general, UBI assumes flash device model where
* there is only one minimal I/O unit size. E.g., in case of NOR flash it is 1,
* in case of NAND flash it is a NAND page, etc. This is reported by MTD in the
* @ubi->mtd->writesize field. But as an exception, UBI admits of using another
* @ubi->mtd->writesize field. But as an exception, UBI admits use of another
* (smaller) minimal I/O unit size for EC and VID headers to make it possible
* to do different optimizations.
*
......
......@@ -544,8 +544,7 @@ struct ubi_debug_info {
* @vid_hdr_aloffset: starting offset of the VID header aligned to
* @hdrs_min_io_size
* @vid_hdr_shift: contains @vid_hdr_offset - @vid_hdr_aloffset
* @bad_allowed: whether the MTD device admits of bad physical eraseblocks or
* not
* @bad_allowed: whether the MTD device admits bad physical eraseblocks or not
* @nor_flash: non-zero if working on top of NOR flash
* @max_write_size: maximum amount of bytes the underlying flash can write at a
* time (MTD write buffer size)
......
......@@ -2002,7 +2002,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
mii_speed--;
if (mii_speed > 63) {
dev_err(&pdev->dev,
"fec clock (%lu) to fast to get right mii speed\n",
"fec clock (%lu) too fast to get right mii speed\n",
clk_get_rate(fep->clk_ipg));
err = -EINVAL;
goto err_out;
......@@ -2948,7 +2948,7 @@ static void set_multicast_list(struct net_device *ndev)
}
/* only upper 6 bits (FEC_HASH_BITS) are used
* which point to specific bit in he hash registers
* which point to specific bit in the hash registers
*/
hash = (crc >> (32 - FEC_HASH_BITS)) & 0x3f;
......
......@@ -115,5 +115,5 @@ static struct phy_driver dp83848_driver[] = {
module_phy_driver(dp83848_driver);
MODULE_DESCRIPTION("Texas Instruments DP83848 PHY driver");
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com");
MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
MODULE_LICENSE("GPL");
......@@ -2111,7 +2111,7 @@ static enum version_8821ae _rtl8821ae_read_chip_version(struct ieee80211_hw *hw)
break;
default:
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"Chip Version ID: Unknow (0x%X)\n", version);
"Chip Version ID: Unknown (0x%X)\n", version);
break;
}
......
......@@ -241,7 +241,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
pin_reg & BIT(ACTIVE_LEVEL_OFF + 1))
active_level = "Active on both|";
else
active_level = "Unknow Active level|";
active_level = "Unknown Active level|";
if (pin_reg & BIT(LEVEL_TRIG_OFF))
level_trig = "Level trigger|";
......
......@@ -631,7 +631,7 @@ static void __exit mac_esp_exit(void)
}
MODULE_DESCRIPTION("Mac ESP SCSI driver");
MODULE_AUTHOR("Finn Thain <fthain@telegraphics.com.au>");
MODULE_AUTHOR("Finn Thain");
MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_ALIAS("platform:" DRV_MODULE_NAME);
......
......@@ -1066,7 +1066,7 @@ snic_hba_reset_cmpl_handler(struct snic *snic, struct snic_fw_req *fwreq)
if (!snic->remove_wait) {
spin_unlock_irqrestore(io_lock, flags);
SNIC_HOST_ERR(snic->shost,
"reset_cmpl:host reset completed after timout\n");
"reset_cmpl:host reset completed after timeout\n");
ret = 1;
return ret;
......
......@@ -3370,7 +3370,7 @@ EXPORT_SYMBOL(tty_unregister_device);
/**
* __tty_alloc_driver -- allocate tty driver
* @lines: count of lines this driver can handle at most
* @owner: module which is repsonsible for this driver
* @owner: module which is responsible for this driver
* @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
*
* This should not be called directly, some of the provided macros should be
......
......@@ -7,7 +7,7 @@ config AUTOFS4_FS
automounter (amd), which is a pure user space daemon.
To use the automounter you need the user-space tools from
<ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also
<https://www.kernel.org/pub/linux/daemons/autofs/v4/>; you also
want to answer Y to "NFS file system support", below.
To compile this support as a module, choose M here: the module will be
......
......@@ -186,7 +186,7 @@ extern long io_schedule_timeout(long timeout);
extern void io_schedule(void);
/**
* struct prev_cputime - snaphsot of system and user cputime
* struct prev_cputime - snapshot of system and user cputime
* @utime: time spent in user mode
* @stime: time spent in system mode
* @lock: protects the above two fields
......
......@@ -495,7 +495,7 @@ asmlinkage __visible void __init start_kernel(void)
debug_objects_early_init();
/*
* Set up the the initial canary ASAP:
* Set up the initial canary ASAP:
*/
boot_init_stack_canary();
......@@ -504,10 +504,10 @@ asmlinkage __visible void __init start_kernel(void)
local_irq_disable();
early_boot_irqs_disabled = true;
/*
* Interrupts are still disabled. Do necessary setups, then
* enable them
*/
/*
* Interrupts are still disabled. Do necessary setups, then
* enable them.
*/
boot_cpu_init();
page_address_init();
pr_notice("%s", linux_banner);
......
......@@ -7631,7 +7631,7 @@ static inline void update_sd_lb_stats(struct lb_env *env, struct sd_lb_stats *sd
/**
* check_asym_packing - Check to see if the group is packed into the
* sched doman.
* sched domain.
*
* This is primarily intended to used at the sibling level. Some
* cores like POWER7 prefer to use lower numbered SMT threads. In the
......
......@@ -987,7 +987,7 @@ EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
* Returns:
* 0 when the timer was not active
* 1 when the timer was active
* -1 when the timer is currently excuting the callback function and
* -1 when the timer is currently executing the callback function and
* cannot be stopped
*/
int hrtimer_try_to_cancel(struct hrtimer *timer)
......
......@@ -1120,7 +1120,7 @@ void add_timer_on(struct timer_list *timer, int cpu)
EXPORT_SYMBOL_GPL(add_timer_on);
/**
* del_timer - deactive a timer.
* del_timer - deactivate a timer.
* @timer: the timer to be deactivated
*
* del_timer() deactivates a timer - this works on both active and inactive
......
ksymoops has been removed from the kernel. It was always meant to be a
free standing utility, not linked to any particular kernel version.
The latest version can be found in
ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops together
with patches to other utilities in order to give more accurate Oops
debugging.
https://www.kernel.org/pub/linux/utils/kernel/ksymoops together with patches to
other utilities in order to give more accurate Oops debugging.
Keith Owens <kaos@ocs.com.au> Sat Jun 19 10:30:34 EST 1999
......@@ -262,8 +262,8 @@ EOF
cat <<EOF > debian/copyright
This is a packacked upstream version of the Linux kernel.
The sources may be found at most Linux ftp sites, including:
ftp://ftp.kernel.org/pub/linux/kernel
The sources may be found at most Linux archive sites, including:
https://www.kernel.org/pub/linux/kernel
Copyright: 1991 - 2015 Linus Torvalds and others.
......
......@@ -486,7 +486,7 @@ __cmd_probe(int argc, const char **argv)
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show parsed arguments, etc)"),
OPT_BOOLEAN('q', "quiet", &params.quiet,
"be quiet (do not show any mesages)"),
"be quiet (do not show any messages)"),
OPT_CALLBACK_DEFAULT('l', "list", NULL, "[GROUP:]EVENT",
"list up probe events",
opt_set_filter_with_command, DEFAULT_LIST_FILTER),
......
......@@ -8,7 +8,7 @@ ifeq ($(ARCH),powerpc)
GIT_VERSION = $(shell git describe --always --long --dirty || echo "unknown")
CFLAGS := -std=gnu99 -Wall -O2 -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR)/include $(CFLAGS)
CFLAGS := -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"$(GIT_VERSION)"' -I$(CURDIR)/include $(CFLAGS)
export CFLAGS
......
......@@ -3,7 +3,7 @@ CFLAGS += -O3 -Wl,-no-as-needed -Wall $(BUILD_FLAGS)
LDFLAGS += -lrt -lpthread
# these are all "safe" tests that don't modify
# system time or require escalated privledges
# system time or require escalated privileges
TEST_GEN_PROGS = posix_timers nanosleep nsleep-lat set-timer-lat mqueue-lat \
inconsistency-check raw_skew threadtest rtctest
......@@ -14,7 +14,7 @@ TEST_GEN_PROGS_EXTENDED = alarmtimer-suspend valid-adjtimex adjtick change_skew
include ../lib.mk
# these tests require escalated privledges
# these tests require escalated privileges
# and may modify the system time or trigger
# other behavior like suspend
run_destructive_tests: run_tests
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment