Commit 89e5c58f authored by Daniel Borkmann's avatar Daniel Borkmann Committed by Jakub Kicinski

net: Fix gro aggregation for udp encaps with zero csum

We noticed a GRO issue for UDP-based encaps such as vxlan/geneve when the
csum for the UDP header itself is 0. In that case, GRO aggregation does
not take place on the phys dev, but instead is deferred to the vxlan/geneve
driver (see trace below).

The reason is essentially that GRO aggregation bails out in udp_gro_receive()
for such case when drivers marked the skb with CHECKSUM_UNNECESSARY (ice, i40e,
others) where for non-zero csums 2abb7cdc ("udp: Add support for doing
checksum unnecessary conversion") promotes those skbs to CHECKSUM_COMPLETE
and napi context has csum_valid set. This is however not the case for zero
UDP csum (here: csum_cnt is still 0 and csum_valid continues to be false).

At the same time 57c67ff4 ("udp: additional GRO support") added matches
on !uh->check ^ !uh2->check as part to determine candidates for aggregation,
so it certainly is expected to handle zero csums in udp_gro_receive(). The
purpose of the check added via 662880f4 ("net: Allow GRO to use and set
levels of checksum unnecessary") seems to catch bad csum and stop aggregation
right away.

One way to fix aggregation in the zero case is to only perform the !csum_valid
check in udp_gro_receive() if uh->check is infact non-zero.

Before:

  [...]
  swapper     0 [008]   731.946506: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100400 len=1500   (1)
  swapper     0 [008]   731.946507: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100200 len=1500
  swapper     0 [008]   731.946507: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101100 len=1500
  swapper     0 [008]   731.946508: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101700 len=1500
  swapper     0 [008]   731.946508: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101b00 len=1500
  swapper     0 [008]   731.946508: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100600 len=1500
  swapper     0 [008]   731.946508: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100f00 len=1500
  swapper     0 [008]   731.946509: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100a00 len=1500
  swapper     0 [008]   731.946516: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100500 len=1500
  swapper     0 [008]   731.946516: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100700 len=1500
  swapper     0 [008]   731.946516: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101d00 len=1500   (2)
  swapper     0 [008]   731.946517: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101000 len=1500
  swapper     0 [008]   731.946517: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101c00 len=1500
  swapper     0 [008]   731.946517: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101400 len=1500
  swapper     0 [008]   731.946518: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100e00 len=1500
  swapper     0 [008]   731.946518: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497101600 len=1500
  swapper     0 [008]   731.946521: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff966497100800 len=774
  swapper     0 [008]   731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497100400 len=14032 (1)
  swapper     0 [008]   731.946530: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff966497101d00 len=9112  (2)
  [...]

  # netperf -H 10.55.10.4 -t TCP_STREAM -l 20
  MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
  Recv   Send    Send
  Socket Socket  Message  Elapsed
  Size   Size    Size     Time     Throughput
  bytes  bytes   bytes    secs.    10^6bits/sec

   87380  16384  16384    20.01    13129.24

After:

  [...]
  swapper     0 [026]   521.862641: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff93ab0d479000 len=11286 (1)
  swapper     0 [026]   521.862643: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479000 len=11236 (1)
  swapper     0 [026]   521.862650: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff93ab0d478500 len=2898  (2)
  swapper     0 [026]   521.862650: net:netif_receive_skb: dev=enp10s0f0  skbaddr=0xffff93ab0d479f00 len=8490  (3)
  swapper     0 [026]   521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d478500 len=2848  (2)
  swapper     0 [026]   521.862653: net:netif_receive_skb: dev=test_vxlan skbaddr=0xffff93ab0d479f00 len=8440  (3)
  [...]

  # netperf -H 10.55.10.4 -t TCP_STREAM -l 20
  MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.55.10.4 () port 0 AF_INET : demo
  Recv   Send    Send
  Socket Socket  Message  Elapsed
  Size   Size    Size     Time     Throughput
  bytes  bytes   bytes    secs.    10^6bits/sec

   87380  16384  16384    20.01    24576.53

Fixes: 57c67ff4 ("udp: additional GRO support")
Fixes: 662880f4 ("net: Allow GRO to use and set levels of checksum unnecessary")
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tom Herbert <tom@herbertland.com>
Acked-by: default avatarWillem de Bruijn <willemb@google.com>
Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20210226212248.8300-1-daniel@iogearbox.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent d313d16b
...@@ -526,7 +526,7 @@ struct sk_buff *udp_gro_receive(struct list_head *head, struct sk_buff *skb, ...@@ -526,7 +526,7 @@ struct sk_buff *udp_gro_receive(struct list_head *head, struct sk_buff *skb,
} }
if (!sk || NAPI_GRO_CB(skb)->encap_mark || if (!sk || NAPI_GRO_CB(skb)->encap_mark ||
(skb->ip_summed != CHECKSUM_PARTIAL && (uh->check && skb->ip_summed != CHECKSUM_PARTIAL &&
NAPI_GRO_CB(skb)->csum_cnt == 0 && NAPI_GRO_CB(skb)->csum_cnt == 0 &&
!NAPI_GRO_CB(skb)->csum_valid) || !NAPI_GRO_CB(skb)->csum_valid) ||
!udp_sk(sk)->gro_receive) !udp_sk(sk)->gro_receive)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment